2007-2016 Volkswagen Tiguan 4 Door Changing a wheel -> After changing a wheel User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Changing a wheel -> After changing a wheel for Your Volkswagen Tiguan 4 Door First Generation (2007-2016)

Removing the wheel  
Review the checklist ⇒ꢀ Preparations for changing a wheel.  
Loosen the wheel bolts ⇒ꢀ Wheel bolts.  
Lift the vehicle ⇒ꢀ Lifting the vehicle with the vehicle jack.  
Completely unscrew and remove the previously loosened wheel bolts using the hexagonal socket  
in the screwdriver handle ⇒ꢀfig. 198. Place the wheel bolts on a clean surface.  
Remove the wheel.  
Installing a spare tire or a compact spare wheel  
If the tire is a unidirectional tire, be sure to install it in the proper rolling direction ⇒ꢀ Unidirectional tires.  
Place the spare tire or compact spare into place on the vehicle.  
Screw in all wheel bolts clockwise and tighten them slightly using the hexagonal socket in the  
screwdriver handle.  
Lower the vehicle with the jack.  
Use the lug wrench to firmly tighten all wheel bolts (turn clockwise) ⇒ꢀ  
. Do not tighten them in  
sequence! Tighten any wheel bolt to begin, then tighten the wheel bolt diagonally opposite the first  
bolt, and so forth.  
Install the wheel bolt caps, center wheel hubcap, or wheel cover, if any ⇒ꢀ Wheel trim.  
WARNING  
Wheel bolts that are tightened or installed improperly can come loose, causing loss of  
vehicle control, a crash, and serious personal injury.  
Always keep wheel bolts and threads in the wheel hub clean and free of oil and grease.  
The wheel bolts must turn easily and must be tightened with the right torque.  
Use the hexagonal socket in the screwdriver handle only to turn the wheel bolts when they  
are loose, never to loosen them or tighten them firmly.  
WARNING  
Improper use of a compact spare wheel can cause loss of vehicle control, a crash or other  
accident, and serious personal injury.  
Never use a compact spare tire if it is damaged or worn down to the wear indicators.  
Never drive faster than 50 mph (80 km/h) with a compact spare wheel. Avoid full-throttle  
acceleration, heavy braking, and fast cornering!  
Never drive more than 125 miles (200 km) with a compact spare wheel that is installed on  
the front axle (drive axle).  
Replace the compact spare with a normal wheel and tire as soon as possible. compact  
spare wheels are designed for brief use only.  
After changing a wheel  
Please first read and note the introductory information and heed the WARNINGS  
Clean the tools in the vehicle tool kit if necessary and stow them in the left storage compartment in  
the luggage compartment ⇒ꢀ Vehicle tool kit.  
Securely store the compact spare wheel or the wheel you took off the vehicle in the luggage  
compartment.  
Have the wheel bolt tightening torque immediately checked with a torque wrench ⇒ꢀ Wheel bolts.  
Have the damaged wheel replaced as soon as possible.  
The Tire Pressure Monitoring System (TPMS) must be “recalibrated” after each tire change ⇒ꢀ  
Tire Pressure Monitoring System (TPMS).  
Removing Fender Premium Audio subwoofer  
Fig. 199 Under the luggage compartment floor: Fender Premium Audio subwoofer.  
Please first read and note the introductory information and heed the WARNINGS  
The subwoofer is located under the luggage compartment floor.  
Removing the subwoofer  
Follow these steps in the order listed here:  
1. Completely unscrew the fastening screw ⇒ꢀfig. 199 (2) counterclockwise and remove with metal  
cap.  
2. Grasp the subwoofer by the handles (3) and partially remove it from the recess.  
3. Disconnect the electrical connector (1) from the subwoofer by pressing the release tab in the  
direction of the arrow (close-up), then pulling the connector out of the socket.  
4. Place the subwoofer in a clean storage location.  
Reinstalling the subwoofer  
1. Grasp the subwoofer by the handles (3) and put it down close enough to allow the electrical  
connector (1) to be reconnected.  
2. Reinstall the subwoofer and put it back into the recess.  
3. The arrow must be pointing toward the front of the vehicle ⇒ꢀfig. 199 (close-up).  
4. Reinstall the fastening screw with metal cap and tighten it (2) clockwise.  
5. Lower the luggage compartment floor and guide it downwards back into place.  

Related Topics

Popular Owner Manuals