Instrument explanations ⇒ꢀfig. 11:
(1)
(2)
Speedometer.
Tachometer (shows engine revolutions per minute in thousands). The red zone at the end of
the scale indicates maximum permissible engine rpm (revolutions per minute) for all gears after
the break-in period. Before reaching the red zone, select the next higher gear or selector level
position Drive (D), or ease your foot off the accelerator ⇒ꢀ
Displays
.
(3)
(4)
Reset button for the trip odometer display trip.
–
–
Push and hold the 0.0 / SET button about one second in order to reset to zero.
Push and hold the 0.0 / SET button for more than 10 seconds to display the vehicle's en-
gine code. You must do this when the ignition is on, but the engine is not running.
(5)
(6)
Fuel gauge
Button for setting the instrument cluster clock, the Radio or Radio & Navigation system
clock1.
–
–
–
With the ignition on, push the ꢀ ꢀ ꢁ button to highlight the hour or the minutes in the clock
display.
To advance the clock, push the 0.0 / SET button (4). Press and hold the button to fast for-
ward.
Push the ꢀ ꢀ ꢁ button again to finish setting the clock.
(7)
.
Engine coolant temperature display ꢁ
1
On appropriately equipped vehicles, the clocks can also be set via the Settings menu in the instrument
cluster display ⇒ꢀpage Error! Bookmark not defined., Settings menu⇒ꢀpage 29, Settings menu.
English 
