ꢀ
ꢀ
To secure, push the retaining pin ⇒ꢀfig. 107 to the right.
To close, push the retaining pin (1) to the left and guide the luggage compartment floor
downwards.
Extending the luggage compartment floor forward
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Remove the luggage compartment cover ⇒ꢀ Luggage compartment cover.
Remove the rear head restraints ⇒ꢀ Adjusting the seating position.
Push both sections of the rear seat forward ⇒ꢀ Adjusting the seating position.
Fold the rear backrests forward ⇒ꢀ Adjusting the seating position.
Fold the cover forward ⇒ꢀfig. 108 (1).
Extending the luggage compartment floor downward
ꢀ
ꢀ
Remove the luggage compartment cover ⇒ꢀ Luggage compartment cover.
Raise the luggage compartment floor, pull from the side pins (2) and remove it from the vehicle to
the rear.
There may be a foam element with the spare wheel ⇒ꢀfig. 107 located beneath the variable luggage
compartment floor. If a spare wheel is present, remove it ⇒ꢀ Compact spare wheel and remove the
foam element from the luggage compartment.
WARNING
During hard braking or an accident, loose objects can fly through the passenger
compartment and cause serious or even fatal injuries.
ꢀ
Even if the luggage compartment floor panel is properly raised, it is still necessary to
secure all objects.
Objects stowed between the rear seat bench and the luggage compartment floor panel
must never be more than 2/3 as high as the raised floor panel.
Objects stowed between the rear seat bench and the raised luggage compartment floor
ꢀ
ꢀ
panel must never weigh more than about 16.5 lbs. (7.5 kg).
NOTICE
Do not let the luggage compartment floor fall freely when closing it. Always guide it down into
place. The trim or the luggage compartment floor could be damaged.
If you slide the rear seats forward, there is a gap between the luggage compartment floor and
the rear seats. Make certain there are no objects in this space before sliding the rear seats back again.
English 