Switches in the driver door
Key to fig. 36:
(1)
(2)
(3)
For the windows in the front doors.
For the windows in the rear doors.
Safety switch.
Opening or closing windows
Function
Opening:
Closing:
Action
Press the ꢀ switch.
Pull the ꢀ switch.
Stopping automatic Press/pull the switch again.
window movement:
The safety switch (3) deactivates the power windows
in the rear doors. The yellow indicator light in the
switch lights up when activated.
ꢀ
The power windows operate only when the ignition is switched on.
You can still use the power windows for several minutes after the ignition is switched off as long as the
driver or front passenger door has not been opened. When the vehicle key has been removed from
the ignition and the driver door has been opened, the power windows cannot be opened or closed.
A separate button for controlling the window is located in the front passenger door.
Power windows – features
ꢀ Please first read and note the introductory information and heed the WARNINGS
One-touch opening and closing
The one-touch feature automatically opens/closes a power window all the way. The window switch
does not have to be held down/up.
For one-touch closing: Pull the switch for the window up briefly as far as it goes.
For one-touch opening: Press the switch for the window down briefly as far as it goes.
Stopping automatic movement: Pull/press the switch again.
Reactivating the one-touch feature
If the vehicle battery is disconnected or dead and the windows are not completely closed, the one-
touch feature will not work and must be reactivated:
ꢀ
ꢀ
ꢀ
Close all windows and doors.
Pull up the switch for the respective window and hold it for at least 2 seconds in this position.
Release the switch, pull up and hold again. The one-touch feature is now reactivated.
The one-touch feature can be reactivated for one or more windows at the same time.
English 
