Only perform these steps in the specified order:
fig. 204
Low beam
headlight
Parking light
Turn signal
High beam
headlight or
daytime running
light
4.
Turn the bulb
holder (3) B
Unclip the bulb
holder (4) B
upward out of the B upward out of the
Unclip the parking
light bulb holder (4)
Turn the bulb (6) B
counterclockwise
until it stops and
counterclockwise
until it stops and
remove it toward
the rear with the
bulb.
guide and remove guide and remove it remove it toward the
it toward the rear
with the bulb.
toward the rear with
the bulb.
rear.
Turn the turn signal
bulb holder (5) B
counterclockwise
until it stops and
remove it toward the
rear with the bulb.
5.
If necessary, press the locking mechanism on the bulb holder
and pull the bulb straight out of the bulb holder.
6.
7.
Replace the burned out light bulb with a new bulb of the same type.
Reinsert the bulb
holder (3) B into
the headlight and
turn it clockwise
until it stops.
Reinsert the bulb
holder (4) B into
the headlight and
clip it into the
guide.
Reinsert the turn
signal bulb holder
(5) B into the
headlight and turn it
clockwise until it
stop.
Reinsert the bulb (6)
B into the headlight
and turn it clockwise
until it stops.
Insert the parking
light bulb holder (4)
B into the headlight
and clip it into the
guide.
Install the cover (1)
A on the back of
the headlight
(retainer vertical)
and turn it
8.
Install the rubber cover (2) A.
clockwise until it
stops.
The illustrations show the left headlight assembly from the rear. The right headlight assembly is
the mirror image of the left headlight assembly.
Different models may have different lights, and the location and design of covers, bulb holders,
and bulbs may be in a different location than shown in the illustrations.
You cannot replace the LEDs in LED daytime running lights. Contact your authorized
Volkswagen dealer or an authorized Volkswagen Service Facility for assistance.
English 
