Roof rack -> Attaching the roof rack base carrier and roof rack for Your Volkswagen Tiguan 4 Door First Generation (2007-2016)

Attaching the roof rack base carrier and roof rack  
Fig. 109 Vehicles without roof railing: Attachment points for the base carrier and roof rack.  
Fig. 110 Vehicles with roof railing: Attachment points for the base carrier and roof rack.  
Please first read and note the introductory information and heed the WARNINGS  
The base carrier is the basis of a complete roof carrier system. For safety reasons, additional  
attachments are necessary for transporting luggage, bicycles, surfboards, skis and small boats.  
Suitable accessories can be purchased from your authorized Volkswagen dealer or authorized  
Volkswagen Service Facility.  
Vehicles without roof railing: Mounting the base carrier and roof rack  
Always attach the base carrier and roof rack correctly.  
Always carefully follow the installation instructions from the base carrier or roof rack manufacturer.  
The mounting holes are on the underside of the roof frame and are only visible when the door is open  
⇒ꢀfig. 109.  
Only mount the roof rack base carrier at the holes shown in the illustration.  
Vehicles with roof railing: Mounting the roof rack  
Typical roof racks cannot be attached to the roof railing. Only roof racks which have been approved by  
Volkswagen may be used.  
Always carefully follow the installation instructions from the roof rack manufacturer.  
The attachment holes are on the inside of the roof railing ⇒ꢀfig. 110 (close-up).  
Only mount the roof rack base carrier at the holes shown in the illustration.  
WARNING  
Installing or using a base carrier or roof rack improperly can cause the entire system to fly off  
the vehicle, causing accidents and injuries.  
Always follow the installation instructions provided by the manufacturer.  
Use the base carrier and roof rack only if they are undamaged and properly installed.  
Mount the roof rack base carrier only at the markings shown in the illustration ⇒ꢀfig. 109  
or ⇒ꢀfig. 110.  
Always install the base carrier and roof rack properly.  
Make sure that all bolts and fasteners are properly installed and properly tightened before  
every trip and retighten them as needed after driving a short distance. During a long trip,  
check all bolts and fasteners at each stop.  
Always properly install special fixtures for items such as bicycles, skis, surfboards, etc.  
Do not modify or repair the base carrier or roof rack.  
Follow the installation instructions provided for installing the roof rack system. Always carry them  
in the vehicle.  
Securing a load on the roof rack  
Please first read and note the introductory information and heed the WARNINGS  
It is not possible to secure a load unless the roof rack system has been properly installed ⇒ꢀ  
Maximum permissible roof load  
.
The maximum permissible roof load for vehicles without a roof railing is 165 lbs. (75 kg) and for  
vehicles with a roof railing, 220 lbs. (100 kg). The roof load is the combined weight of the roof rack  
and the items being carried on the roof ⇒ꢀ  
.
Be sure you know the weight of the roof rack and the items you want to transport on the roof. Weigh  
them if necessary. Never carry a total of more than the maximum permissible roof load.  
When using a roof rack with a lower load limit, do not load the rack to the maximum weight mentioned  
above. In this case, you may only load the roof rack to the weight limit specified in the system's  
installation instructions.  
Distributing the load  
Distribute the load evenly and secure it properly ⇒ꢀ  
.
Checking the mountings  
After the base carrier and rook rack have been installed, check all bolts and fasteners after driving a  
short time and at regular intervals thereafter.