2007-2016 Volkswagen Tiguan 4 Door Safety belts -> Using safety belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety belts -> Using safety belts for Your Volkswagen Tiguan 4 Door First Generation (2007-2016)

Please first read and note the introductory information and heed the WARNINGS  
Used properly, safety belts can make a big difference. Safety belts help to keep passengers in their  
seats, gradually reduce energy levels applied to the body in a collision, and help prevent the  
uncontrolled movement that can cause serious injuries. In addition, safety belts reduce the danger of  
being thrown out of the vehicle ⇒ꢀfig. 64.  
Safety belts attach passengers to the car and give them the benefit of being slowed down more gently  
or “softly” through the “give” in the safety belts, crumple zones, and other safety features (such as  
airbags) engineered into today's vehicles. The front crumple zones and other passive safety features  
(such as the airbag system) are also designed to absorb kinetic energy. By “absorbing” the kinetic  
energy over a longer period of time, the forces on the body become more “tolerable” and less likely to  
cause injury.  
Although these examples are based on a frontal collision, safety belts can also substantially reduce  
the risk of injury in other kinds of crashes. So, whether you're on a long trip or “just going to the corner  
store,” always buckle up and make sure that others do, too.  
Accident statistics show that vehicle occupants properly wearing safety belts have a lower risk of being  
injured and a much better chance of surviving a collision. Properly using safety belts also greatly  
increases the ability of the supplemental airbags to do their job in a collision. For this reason, wearing  
a safety belt is required by law in most countries including the United States and Canada.  
Although your Volkswagen is equipped with airbags, you still have to wear the safety belts provided.  
Front airbags, for example, are activated only in some frontal collisions. The front airbags are not  
activated in all frontal collisions, in side and rear collisions, in rollovers, or in cases when the  
conditions for deployment stored in the electronic control unit are not met. The same goes for the other  
airbag systems on your Volkswagen.  
So always wear your safety belt and make sure that everybody in your vehicle is properly restrained!  
Using safety belts  
Please first read and note the introductory information and heed the WARNINGS  
Checklist  
Using safety belts ⇒ꢀ  
Damage to safety belts reduces their overall effectiveness and increases the risk of serious  
personal injury and death whenever the vehicle is being used.  
Check the condition of all safety belts regularly.  
Keep safety belts clean.  
Keep objects and liquids away from safety belt webbing, the safety belt buckle tongue, and the  
safety belt buckle latch and opening.  
Do not pinch or damage the safety belt or buckle tongue (for instance, when closing a door).  
Never modify, disassemble or try to repair safety belts and safety belt anchorages.  
Always fasten your safety belt properly before driving and keep it fastened whenever the vehicle is  
moving.  
Twisted safety belt  
If it is difficult to pull the safety belt out of the belt guide, the belt may be twisted inside the side trim  
because the belt retracted too quickly when it was taken off.  
Hold the safety belt tongue, slowly and carefully pull safety belt all the way out.  
Untwist the safety belt and slowly return the belt by hand.  
If you cannot untwist the safety belt, wear it anyway. Make sure that the safety belt is twisted in a spot  
where it does not come in direct contact with your body. Have the safety belt untwisted immediately by  
an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Lockable safety belt  
The retractors for the rear seat safety belts and the front passenger safety belt have a switchable  
locking feature for child restraints in addition to the emergency locking feature. Whenever a child  
restraint is installed with a safety belt, the safety belt must be locked so that the safety belt webbing  
cannot unreel. The switchable locking feature lets you lock the belt so that a child restraint can be  
properly installed and, for example, so that it can't tip to the side when the vehicle goes around a  
corner ⇒ꢀ Child safety and child restraints.  
To see whether a safety belt is lockable, pull the safety belt all the way out of the safety belt retractor.  
You should then hear a “clicking” sound as the belt winds back into the retractor reel. Test the  
switchable locking feature by pulling on the belt. When the switchable locking feature is active, you  
should no longer be able to pull the belt out of the retractor.  
The locking feature must be deactivated when a vehicle occupant uses the safety belt.  
WARNING  
Improper use and care of safety belts increases the risk of severe personal injury or death.  
Regularly check safety belts and related parts for damage.  
Damaged safety belts must be replaced; they cannot be repaired.  
Always keep safety belts clean.  
Never catch, damage or chafe safety belt webbing on sharp edges.  
Always keep objects and liquids away from the belt buckle and buckle opening.  
Fastening and unfastening safety belts  
Fig. 65 Inserting the buckle tongue into the belt buckle.  

Related Topics

Popular Owner Manuals