ꢀ
ꢀ
ꢀ
ꢀ
Briefly press the desired memory button 1, 2 or 3 on the outer side of the driver seat.
Shift the transmission into Reverse (R).
Adjust the passenger outside mirror to provide good visibility of the curb, for example.
The adjusted mirror position is automatically stored and assigned to the vehicle key used to unlock
the vehicle. The preselected position will be recalled when the key assigned to that mirror adjustment
position is used again.
The passenger-side outside mirror automatically adjusts back from the position stored for backing up
when the vehicle moves forward at about 10 mph (15 km/h) or more or when the rotary knob ⇒ꢀfig. 98
is rotated from R into a different position.
Recalling settings for driver seat and outside mirrors
ꢀ
Briefly press the appropriate memory button when the vehicle is not moving, the ignition is
switched off, and the driver door is open.
OR: If the ignition is switched on and the driver door is closed, press and hold the appropriate
ꢀ
memory button until the stored position is reached.
Assigning driver seat and outside mirror settings to a vehicle key
The memory function of all vehicle keys is disabled when the vehicle is first delivered from the factory.
To enable vehicle key memory feature:
ꢀ
Unlock the driver door.
ꢀ
ꢀ
Press and hold a memory button ⇒ꢀfig. 56 until memory position is reached.
Press and hold the unlock button ꢀ on the vehicle key and then press the desired memory button
at the same time within about 3 seconds. A chime sounds to confirm activation.
To disable remote control vehicle key memory function:
ꢀ
ꢀ
Press and hold the SET button.
Press and hold the unlock button ꢀ on the remote control vehicle key within about 10 seconds. A
chime sounds to confirm deactivation.
Assigning settings to an additional vehicle key
ꢀ Follow the instructions ⇒ꢀAssigning driver seat and outside mirror settings to a vehicle key to
assign the driver seat and outside mirror settings to the vehicle key.
ꢀ
ꢀ
ꢀ
Unlock the vehicle with the same vehicle key.
Adjust driver seat and outside mirrors.
Lock the vehicle with locking button ꢁ in the vehicle key to store the settings.
Once the settings are stored, the driver seat and the outside mirrors move to the stored positions
whenever the vehicle is unlocked with the vehicle key open button ꢀ and the driver door is opened. If
2 people use the vehicle, each of them should always use the key in which his or her personal settings
have been stored.
Initializing the memory seat
The memory system must be initialized by an authorized Volkswagen dealer, an authorized
Volkswagen Service Facility, or another qualified workshop in certain situations, for instance, if a new
driver seat is installed.
Initializing clears all memories and assignments of the memory seat. After that, memory buttons can
be reprogrammed and assigned to a remote control vehicle key.
ꢀ
ꢀ
ꢀ
ꢀ
Open the driver door but do not enter the vehicle.
Adjust the driver seat from the outside.
Move the angle of the backrest forward as far as it will go.
Release the backrest adjustment switch and press it again until you hear a chime sound.
English 
