Advertisement

Advertisement

Parking and maneuvering -> Rear View Camera (Rear View) for Your Volkswagen Tiguan 4 Door Third Generation (2024-2025)

Rear View Camera (Rear View)  
Introduction  
The Rear View Camera system in the  
rear of the vehicle makes it easier for  
the driver to see behind the vehicle  
and assists when parking.  
System function  
The Rear View Camera system shows the area behind the vehicle on the Infotainment system screen. Depending on the  
mode and vehicle equipment, orientation lines may assist in the view toward the rear  
.
WARNING  
The Rear View Camera system is not a replacement for the driver's attention and works only within the system limitations.  
Using the camera image to estimate the distance to people or obstacles may not be precise. If you do not take care, there  
is a risk of accidents and serious injuries.  
Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the  
vehicle.  
Bear in mind that camera lenses can enlarge and distort the field of vision.  
The orientation lines superimposed on the camera image are shown by the system regardless of the vehicle's surroundings.  
There is no automatic obstacle detection by the camera while it is active. The driver must evaluate whether the vehicle will fit  
in the parking space.  
If a trailer is connected to the factory-installed trailer hitch, all orientation lines for the rear area are hidden in the camera  
image.  
If a camera is installed in the trunk lid, the orientation lines are also hidden if the trunk lid is open.  
Switching the Rear View Camera system on and off  
Please read the introductory information and heed the Warnings and Notice   
and Safety instructions.  
Switching on  
Rear View Camera system without parking mode selection:  
1. Select the reverse gear.  
Rear View Camera system with parking mode selection:  
1. Select the reverse gear.  
Or: press the  
button.  
Switching off  
Rear View Camera system without parking mode selection:  
1. Disengage reverse gear.  
Rear View Camera system with parking mode selection:  
1. Press the  
button.  
Or: the Rear View Camera system switches off when forward travel becomes faster.  
Parking (Rear View Camera system without parking mode selection)  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
292  
Fig. 151 Infotainment system: Parking with the Rear View Camera system.  
Searching for a parking space.  
Steering toward the selected parking space.  
Aligning the vehicle within the parking space.  
Road surface.  
Selected parking space.  
Side boundaries of the selected parking space.  
Rear boundary of the parking space.  
Screen display  
Red line: Boundary or safety distance from the vehicle.  
Green side line: Extension of the vehicle.  
Adjust the  
brightness, contrast, and color.  
Depending on the country, if the camera image on a parking system has been switched on by engaging the reverse gear, no  
function keys are displayed for safety reasons. These function keys can be displayed again by tapping the function key  
.
1. Position your vehicle in front of the parking space fig. 151  
.
2. Select the reverse gear.  
3. Slowly reverse while steering so that the green side lines line up with the selected parking space. The green lines must  
293  
line up with the side boundaries of your parking space fig. 151  
.
4. Stop when the red horizontal line reaches the rear boundary fig. 151  
.
Parking (Rear View Camera system with parking mode selection)  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
Screen display  
Perpendicular parking: Guide lines help when parking in reverse perpendicular to the road.  
Parallel parking:  
Guide lines and boxes help when parking in reverse parallel to the road.  
Turn the steering wheel (parallel parking  
mode).  
Stop the vehicle (parallel parking mode).  
Cross traffic: Depiction of the area behind the vehicle and the areas  
Trailer or terrain assistance: Depiction of the area immediately behind the  
Red line: Boundary or safety distance from the vehicle.  
to the side of the vehicle at a wide angle.  
vehicle with a high zoom factor and guide lines.  
Red frame: Outline of the vehicle (parallel parking).  
Yellow lines: the vehicle's path based on the steering angle.  
Yellow assisting box: front or rear edge of the parking space (parallel parking)  
Green horizontal lines: Boundaries.  
Green line on the side: turning point when parking (parallel parking).  
Green frame: outline of the vehicle (parallel parking).  
Adjust the brightness, contrast, and color.  
Depending on the country, if the camera image on a parking system has been switched on by engaging the reverse gear, no  
function keys are displayed for safety reasons. These function keys can be displayed again by tapping the function key  
.
Parking mode: Parking perpendicular to the road  
294  
Fig. 152 Infotainment system: Parking perpendicular to the road.  
Searching for a parking space.  
Steering toward the selected parking space.  
Aligning the vehicle within the parking space.  
Road surface.  
Parking space.  
Side boundary of the parking space.  
Rear boundary of the parking space.  
1. Press the  
2. To select the parking mode, tap the  
3. Position your vehicle in front of the parking space fig. 152  
button or function key before driving past the parking space.  
function key in the Infotainment system.  
.
4. Steer so that the yellow lines lead into the parking space. The green and yellow lines must align with the side boundary  
lines fig. 152  
.
5. Stop when the red line reaches the rear boundary fig. 152  
.
Parking mode: Parallel parking  
295  
Fig. 153 Infotainment system: Parking parallel to the road.  
Searching for a parking space.  
Steering toward the selected parking space.  
Aligning the vehicle within the parking space.  
Road surface.  
Obstacle or assisting box.  
Side boundary of the parking space.  
Obstacle or assisting box.  
1. Press the  
button or function key before driving past the parking space.  
2. To select the parking mode, tap the  
function key in the Infotainment system.  
3. Turn on the turn signal for the corresponding side of the road.  
4. Position the vehicle at a distance of approx. 1 m (approx. 3 ft) parallel to the parking row. The yellow assisting boxes mus  
cover the obstacles fig. 153  
or  
. The area in between must be free of obstacles.  
5. Select the reverse gear. A red frame represents the target position of your vehicle fig. 153  
.
6. Turn the steering wheel until the red frame moves between the assisting boxes and becomes green fig. 153  
. Hold th  
steering wheel in this position while driving in reverse.  
If the steering wheel angle needs to change, one of the yellow side lines will become red. The  
steering wheel symbo  
296  
indicates to the driver when the steering wheel must be turned.  
7. Drive slowly in reverse until the  
stop symbol appears or the green line aligns with the side boundary of the parking  
arrow indicates the remaining distance to be driven based on the number of displayed  
space fig. 153  
. An fig. 153  
segments.  
8. Stop the vehicle. Steer in the opposite direction until the steering angle is reached and a direction arrow is no longer  
displayed.  
9. Keep driving in reverse until the  
stop symbol appears or until the red line reaches the rear boundary.  
Parking mode: Trailer support  
On vehicles with a trailer hitch installed at the factory, trailer support can be used for assistance when attaching the trailer to a  
draw bar.  
1. To select the parking mode, tap the  
function key.  
Colored guide lines help you with the maneuvering process.  
Red lines: position of the trailer hitch.  
Green lines: distance to the trailer hitch.  
Orange line: predicted direction o  
the trailer hitch based on the steering wheel angle.  
Area View  
Introduction  
The Area View function can display  
the entire vehicle surroundings in real  
time. This function helps you recognize  
obstacles in good time in situations  
where there might be blind spots.  
System function  
The Area View displays the vehicle surroundings with the aid of multiple cameras, e.g. the Rear View Camera system, front  
camera and in the outside mirrors ⇒  
.
WARNING  
Area View is not a replacement for the driver's attention and works only within the system limitations. Using the camera  
image to estimate the distance to people or obstacles may not be precise. If you do not take care, there is a risk of  
accidents and serious injuries.  
Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the  
vehicle.  
Bear in mind that camera lenses can enlarge and distort the field of vision.  
Switching on and off  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
297