Switching between speed limiter and cruise control
Status display on the instrument cluster screen
Applies to virtual cockpit.
— Press the button.
illuminated – cruise control is active
Switching to cruise control interrupts the speed lim-
iter operation.
Exceeding the speed limit
illuminated – cruise control is regulating the
speed
— Depress the accelerator pedal all the way down.
When cruise control starts, the set speed is dis-
played.
Applies to the analog instrument cluster.
When the vehicle slows down below the set speed
limit, cruise control will continue.
illuminated – cruise control is active
Troubleshooting
illuminated together with
control is regulating the speed of the vehicle
– the cruise
Speed limiter fault
illuminated
When cruise control is started, the set speed
highlighted and displayed.
is
1. Turn off the engine and start again.
2. If the system still does not work, seek assis-
tance from a specialist garage.
Operating conditions
✓
The driving speed is over 20 km/h.
Cruise control system
What you should be mindful of
Operation
Do not use CCS in the following cases:
— Unfavourable weather conditions.
Operation via the multifunction steering wheel
— The vehicle is travelling on an unpaved or slippery
surface.
— The vehicle is going around a sharp corner.
— The vehicle is driving on an inclined roadway or
on a rutted track.
— The vehicle is passing through a traffic construc-
tion.
Activating/deactivating the cruise control
Functionality
— Press the
button.
The cruise control system maintains the set speed
without the need to depress the accelerator pedal.
Speed control does not take place when cruise con-
trol is activated.
However, this depends on the vehicle's engine out-
put and braking power.
Starting the cruise control
— Press the
button.
WARNING
Setting the speed
Increasing the speed in 1 km/h steps
Risk of the cruise control system starting uninten-
tionally
Decreasing the speed in 1 km/h steps
Deactivate cruise control after use.
·
Increasing/decreasing the speed in 10 km/h
steps
96
Driver Assist systems