2005-2017 Aston Martin Vantage 2 Door Audio -> Audio Controls User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio -> Audio Controls for Your Aston Martin Vantage 2 Door Third Generation (2005-2017)

8.4
Audio
Acoustic Lens Technology
Acoustic Lens Technology (ALT)
gives a wide (180°) horizontal
dispersion of high frequencies.
This prevents the loss of critical
sound and gives listeners an
improved sense of space,
staging and realism, even when
not sitting in the optimal
location
1
for listening to two-
channel stereo reproductions.
Two motorized acoustic lenses, mounted on either side of the
dashboard, rise when the system is set to ON and stay raised until the
audio system is set to OFF.
Audio Controls
[1] ON/OFF: Press for audio ON and OFF.
[2] VOLUME: Volume control.
[3] KEYPAD: Use the numbers as menu short cuts. Press the number
corresponding to the menu number.
[4] DISPLAY: Shows options, menus and information.
[5] SOUND: Press and hold to enter sound setting mode. Press
repeatedly to move though settings, turn to select. When in iPod or
USB mode a press and release will enable file viewing.
[6] TUNING: Turn to manually search stations, change music tracks
or navigate in the menus.
[7] TP: Not used.
[8] SCAN:
• Radio: Find and store the strongest stations.
• Satellite Radio: Automatic station search.
• CD's, iPod / USB: 10 seconds of each track is played. Press
once again to select a track.
[9] AUTO:
• Radio: Automatic station search.
• Satellite Radio: Select radio text.
1.
For the optimal location to listen to two-channel stereo reproductions, the
listener should be sitting equidistant from both loudspeakers on the apex of
an equilateral triangle.
8.5
Audio
[10] CD OPENING: Insert CDs.
[11] MENU: Opens the main menu.
[12] AM/FM: Press to select radio as audio source.
[13] MODE: Press repeatedly to select audio source.
[14] ENTER: Select in the menu, open a selection or open a file.
[15] JOYSTICK: Navigate in the menus.
• Radio: Press left or right to auto search the next station. Press
and hold left or right to manually select a station. Press up or
down to navigate in the menus or preset stations.
• Satellite Radio: Press left or right to auto search the next
station. Press up or down to navigate in the menus or preset
stations.
• CD's: Press left or right to move to the next or previous track.
Press left or right and hold to search within a track or the
whole CD. The search continues as long as the Joystick is
pressed.
• iPod / USB: Press left or right to move to the next track or
previous. Press left or right and hold to search within a track or
the whole music folder. The search continues as long as the
Joystick is pressed.
[16] BACK: Press to move back one action. Press and hold to move
back to the default screen.
[17] CD EJECT: Press to eject CD.
[18] SCROLL:
• Radio: Navigate through
the preset radio stations.
• Satellite Radio: Navigate
the channel list.
• CD's, iPod / USB:
Navigate through the
music tracks.
[19] VOLUME: Volume
control.
Operation
The audio system is available with the vehicle key at least in position
‘I’ and is available until the vehicle key is removed from the ignition
control.
If the audio system is ON when the ignition is set to OFF and the
vehicle key removed, it will automatically start the next time the
vehicle key is moved to position ‘I’.
Press ON/OFF to set the audio system ON or OFF.
When the audio system is set to ON the volume will be at the
same level it was when the audio system was set to OFF.
The JOYSTICK, ENTER and BACK will not operate if Satellite
Navigation is selected (NAV button LED ON) either press:
• The NAV button to deselect satellite navigation (NAV button LED
OFF),
• Or press any audio button other than BACK, ENTER and
JOYSTICK
to access controls for audio.
Pressing the AM/FM or MODE buttons will move the current
audio source.
8.6
Audio
Sound Source
To select radio, at any time while the audio system is ON, press the
AM/FM button repeatedly to navigate between the radio bands.
To select other audio sound sources press the MODE button
repeatedly to navigate through the sound source choices.
Battery Protection Mode
Using the audio system, with the vehicle key at position ‘I’ (ignition
OFF) will drain the battery charge. A warning message will show in
the message centre when the battery charge is low (Refer to ’Battery
Protection Mode’, page 11.26).
Menus
The audio menu is only available when the audio system is in use.
Press MENU to access the main menu. The menu for the current
audio source (i.e. radio, CD, iPod, etc.) will be available.
Search Path
Menu paths are shown for each operation in the following format:
<FM Menu...> Enter <Sound settings...> Enter
Several menu options will require a cross in a box to select an option.
Once the menu item is highlighted press ENTER to either check or
uncheck the box. Then press and hold BACK to accept and return to
the main screen.
In this chapter when asked to ‘Press’ a button, this means ‘Press
and release’. When this is not the case it will be clear in the text.
Active Sound Control
This vehicle has a speed-dependent volume feature known as Active
Sound Control (ASC). This adjusts the volume automatically
depending on the speed of the vehicle.
Press MENU and navigate to sound source menu, press ENTER. Select
<Auto. volume control> Enter <Off>, <Low>, <Optimum> or
<High> Enter.
Original Settings
Radio Functions
Resets all radio settings to the original factory settings: Press MENU
and navigate to <FM Menu...> Enter <Advanced radio settings...>
Enter <Reset all...> Enter. Press ENTER again to confirm.
Sound Settings
Resets all sound settings to the original factory settings: Press MENU
and navigate to sound source menu, press ENTER. Select <Audio
settings...> Enter <Reset all...> Enter. Press ENTER again to confirm.
8.7
Audio
Aston Martin Audio Sound Settings
To access sound settings press and hold SOUND to enter sound
setting mode. Then press repeatedly until the required sound setting
is shown on the DISPLAY. Turn the TUNING dial to the desired
setting.
The level for the centre speaker can only be set if either Dolby
Pro-Logic II or 3 Channel has been selected from the sound source
menu.
Bass: Level for bass.
Treble: Level for treble.
Fader: Balance between the front and rear speakers.
Balance: Balance between the left and right speakers.
Surround: Level for surround sound.
Subwoofer: Level for subwoofer.
Centre: Level for centre speaker.
Surround: Level for surround sound.
Setting the Surround Sound
Press MENU and navigate to the sound source menu, press ENTER.
Select <Audio Settings...> Enter <Surround (AM, FM, CD iPod or
AUX)...> Enter <Dolby Pro-Logic II>, <3 Channel> or <Off> Enter.
Press and hold BACK to return to the main display. The symbol for
Dolby Pro-Logic II is shown on the DISPLAY if Dolby Pro-Logic II is
selected. ‘3CH’ is shown on the DISPLAY if 3 Channel is selected.
'Off' means the system is in normal stereo mode. Dolby Pro-Logic II
is not available in radio mode.
Equalizer
Fine adjustment of the sound from the speakers: Press MENU and
navigate to the sound source menu, press ENTER. Select <Audio
Settings...> Enter <Equalizer...> Enter. Move the JOYSTICK left or
right to set the level. Use the JOYSTICK (up or down) to select the
next frequency. Five frequencies can be adjusted. Press ENTER to
save any changes and exit. Press BACK to exit without saving any
changes.
Dolby Surround Pro-Logic II
Dolby Surround Pro-Logic II, with its centre speaker in the
dashboard, provides more realistic sound reproduction.
The normal left and right stereo channels are divided into left-centre-
right. In addition, ambient surround sound is produced through the
rear speaker channels.
Not available in Radio mode.
Dolby Surround Pro-Logic II and the Dolby
icon are trade-marks of Dolby Laboratories
Licensing Corporation. The Dolby Pro-Logic II
Surround System is manufactured under license
from Dolby Laboratories Licensing Corporation.
8.8
Audio
Bang & Olufsen Audio Sound Settings
To access sound settings press and hold SOUND. Then press
repeatedly until the required sound setting is shown on the DISPLAY.
Turn the TUNING dial to the desired setting.
Sound Focus
The focus of the sound from the audio system can be optimized for
either the driver or the driver and front passenger. Select:
The audio system detects seat occupancy by seat belt
engagement.
Driver: The focus of the sound is optimized for the driver only.
Front: The focus of the sound is optimized for both the driver and the
front passenger.
Rear: The focus of the sound is optimized for both rear seat
passengers.
All: The focus of the sound is optimized both for the front and the
rear passenger(s).
Auto: The audio system automatically detects if driver only, driver
and front passenger or a rear passenger(s) are in the vehicle.
Other Sound Settings
Bass: Level for bass.
Treble: Level for treble.
Fader: Balance between the front and rear speakers.
Balance: Balance between the left and right speakers.
Surround: Level for surround sound.
FM and AM Radio Functions
Automatic Tuning
Select FM1, FM2 or AM using the AM/FM button. Press the JOYSTICK
(left or right) to search for the next strong station.
Press left or right again to start a new search.
If no stations are found press either button again to cancel.
Manual Tuning
There are two ways to tune into a station manually.
• Turn the TUNING dial to set the desired frequency.
• Press and hold the JOYSTICK (left or right).
The frequency rolls slowly in the selected direction and increases
speed after a few seconds.
Release the button when the desired frequency shows on the
DISPLAY. If the frequency needs adjusting, briefly touch one of the
arrows.

Related Topics

Popular Owner Manuals