2005-2017 Aston Martin Vantage 2 Door Audio -> CD Changer Functions User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio -> CD Changer Functions for Your Aston Martin Vantage 2 Door Third Generation (2005-2017)

8.15
Audio
CD Changer Functions
Loading CDs
Use only 4.7 inches CDs. Do not use CDs with adhesive disc
labels. The heat from the CD player can cause the label to come
loose from the disc. The CD player could be damaged.
Do not use CDs that are warped or look warped (critical
measurement for CD warp is 0.03 inch - anything more than this
may cause problems). The CD player will not be able to hold the
CD correctly (because of the warp), this may cause a jam in the
CD player.
If the quality of the CD does not comply with the requirements of
standard EN60908 or if it has been recorded using poor equipment,
sound quality may be poor or playback interrupted.
The CD changer can hold up to six discs.
Press the MODE button repeatedly to select CD. Select an empty
position using the KEYPAD (buttons 1 to 6) or use the JOYSTICK (up
or down). The DISPLAY shows which positions are empty. Make sure
that ‘Insert disc’ is shown then insert a new disc.
The current CD that is playing is shown in green and is positioned
above the other CDs. CD slots that contain a CD are shown in light
grey. Empty CD slots are shown in dark grey. All CD and track
information that is available is shown. This can include CD title, artist,
track name and number.
Selecting a CD
Select the CD to play using KEYPAD buttons 1-6 or the JOYSTICK (up
or down). The number of the disc and track are shown on the
DISPLAY.
Changing Tracks
Push the JOYSTICK (left or right), the SCROLL button, or turn the
TUNING dial to play the next or previous track. The track number is
shown on the DISPLAY.
Fast Forward and Rewind
Push and hold the JOYSTICK left or right to search forwards or
backwards within a track or the whole disc. Searching continues for
as long as the button is depressed.
Random Play
Plays tracks from a CD or CDs in random order.
Press MENU> Navigate to <CD Menu...> Enter <Random...> Enter.
Select <Off>, <Single disc> or <All discs> Enter for the player to
randomly choose from none, one or all CDs.
RND or RND ALL is shown on the DISPLAY while the function is ON.
Push the JOYSTICK (left or right) or SCROLL button to select the next
or previous random track.
Press BACK to cancel random play.
Scan
Press SCAN to play the first ten seconds of each track. While a scan
is in progress push SCAN again or BACK to play a track.
Pause Mode
When the volume is at zero, play will pause. Start play again by
turning the volume up.
8.16
Audio
Disc Text - ON or OFF
Some CDs have title information. The information is shown as text on
the DISPLAY.
Press MENU. Navigate to <CD Menu...> Enter <Disc text> Enter.
If information is stored on the disc, this is shown on the DISPLAY.
Ejecting One CD
Press EJECT.
For traffic safety reasons, the CD stays out for 12 seconds. The
player will then draw back in the disc and set to pause mode. Press
CD to start the player.
Ejecting all CDs
Press and hold EJECT (for longer than two seconds). The entire
magazine is emptied, CD by CD. ‘Eject all’ is shown on the DISPLAY.
This function can only be used when the vehicle is stationary and is
interrupted if the vehicle starts to move. For traffic safety reasons, the
ejected CD stays out for 12 seconds. It must then be removed, or the
function is cancelled.
iPod and USB Functions
iPod and USB Connection
The iPod port is compatible with generation three iPods onwards.
The USB port is only compatible with USB storage devices, e.g.
memory sticks.
On initial connection and on every engine start the system will
synchronize with the connected device. This will take a short while to
complete.
The iPod controls will not operate while connected to the vehicle
audio system. All functionality will be from the vehicle audio system.
Locate the iPod cable or the USB
socket in the armrest cubby box
and connect the:
• iPod player cable to the iPod
cable
• USB device to the USB port.
If not already ON, set the audio system to ON. Repeatedly press the
MODE button until either ‘iPod’ or ‘USB’ shows on the DISPLAY.
The iPod or USB device can now be operated by the audio system.
The USB or iPod is shown and accessed in the order of connectivity.
Playing Tracks
Once the mode has been set to either iPod or USB play automatically
starts.
Selecting Tracks
Press ENTER to show the music folder list. Using the JOYSTICK (up or
down) or the TUNING dial navigate through the folder list or music
tracks. Press ENTER to open a folder or play a track.
Pause Mode
When the volume is at zero, play will pause. Start play by turning the
volume up.
Fast Forward and Rewind
Press and hold the JOYSTICK (left or right) to search within a track or
the whole music folder. The search continues as long as the
JOYSTICK is held.

Related Topics

Popular Owner Manuals