2005-2017 Aston Martin Vantage 2 Door Climate Control -> Climate Controls User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Climate Control -> Climate Controls for Your Aston Martin Vantage 2 Door Third Generation (2005-2017)

6.2
Climate Control
Operating Tips
• A solar sensor is installed on top of the instrument panel, this
should not be covered when driving.
• The intake grille of the in-vehicle temperature sensor is located in
the driver’s knee bolster, close to the centre console. To maintain
the optimum temperature this grille should not be obstructed.
• Moisture which forms on the evaporator in the air conditioning
unit is discharged via a drain tube onto the road. After stopping,
small puddles of water may form underneath the vehicle. This is
normal and does not show a system malfunction.
• Operate the climate control system with the engine operating.
• Clear all obstructions like leaves, snow and ice from the hood and
the air inlet in the front grille to improve the system efficiency.
• Windows can fog up easily in humid weather. Use the climate
control system to demist the windows.
• To help demist the windows, operate the air conditioner to
dehumidify the air.
• Use the ‘outside air’ position in normal conditions. The
‘recirculated air’ position should be used temporarily when
driving on dusty roads or for quick cooling or heating of the
interior.
• If the vehicle has been parked in direct sunlight during hot
weather, open the windows to let warm air escape, then close the
windows and operate the climate control system.
• Operate the climate control system at least once a month to keep
internal parts lubricated.
• Have the climate control system checked before the weather gets
hot. If the climate control system is low on refrigerant or has a
malfunction, consult your Aston Martin Dealer.
• This vehicle is equipped with a pollen filter. It is necessary to
change the filter periodically as shown in the scheduled
maintenance. Consult your Aston Martin Dealer.
• Air conditioning may not function when the outside temperature
approaches 0°C (indicator stays ON even when system is OFF).
Climate Controls
6.3
Climate Control
[1] DISPLAY: Shows options, menus and information.
[2] AUTO: Press for automatic climate control operation (Refer to
’Automatic Operation’, page 6.6).
[3] TEMPERATURE: Set the required in vehicle temperature. Turn
clockwise for hot and counterclockwise for cold. The selected
temperature is shown on the DISPLAY.
[4] A/C: When in manual mode press and release to set the air
conditioning ON or OFF.
[5] HEATED REAR WINDOW: Press to operate the rear window
heater. Goes OFF after 20 minutes if not manually set to OFF. When
the heated rear window is ON the door mirror heaters will work for
6.5 minutes, then go OFF.
Warning: Do not select recirculated air in cold or rainy
weather, it can cause the interior glass to mist up.
[6] MAX : Press for maximum defrost or demist ON or OFF.
Outside air intake is automatically selected and air conditioning is
automatically started.
[7] FAN SPEED: Turn to set the required fan speed (clockwise for fast
speed and counterclockwise for low speed). The fan speed is shown
on the DISPLAY
[8] AIR CIRCULATION: Controls the source of air entering the
vehicle. Press to select recirculated air (button LED ON). Press again
to select outside air as source.
Use the recirculated air position when going through tunnels, driving
in congested traffic (high engine exhaust areas) or when maximum
cooling is required. On start up the default position is outside air as
source. Use this position for normal conditions and demisting.
[9] AIRFLOW: Select the required airflow. The selected air flow
mode is shown on the DISPLAY(Refer to ’Automatic Operation’, page
6.6).
Display Units
To change the DISPLAY units to show Celsius (°C) or Fahrenheit (°F).
Press and hold in buttons 1 and 6 (A). Insert the vehicle key in the
ignition control and move to position ‘II’ (ignition ON), then release
the two buttons.
6.4
Climate Control
Solar and Temperature Sensors
The automatic air conditioner function measures inside and outside
temperatures, and sunlight. It then sets the interior temperature
accordingly. To maintain effective operation do not obscure the
following sensors:
[1] : Solar sensor.
[2] : In-vehicle temperature sensor.

Related Topics

Popular Owner Manuals