document_0900452a81b1b9de.book Seite 75 Donnerstag, 26. Juli 2007 9:16 09
Seats and storage
75
Adjusting contour of lumbar support
WARNING
A
– Press the front or rear of switch A to increase or
• Never adjust the driver's seat when the vehicle is moving - this
decrease the curvature of the lumbar support as
required.
could lead to an accident.
• The electrical seat adjustment also works when the ignition is
off and when the key is not in the ignition. To avoid accidental inju-
ries, never leave children unattended in the vehicle.
Adjusting height of lumbar support
A
– Press the top or bottom of adjuster switch A to move the
• Be careful when adjusting the seat height. Careless or uncon-
lumbar support upwards or downwards as required.
trolled use of the height adjustment can cause injuries.
• Do not drive with the backrests of the front seats reclined too
far as otherwise the seat belt and airbag could fail to restrain the
wearer properly in an accident, possibly leading to injury.
Moving seat backwards or forwards
B
– Press switch A ⇒ page 74, fig. 76 forwards or back-
wards.
Adjusting seat height
Seat memory
B
– Press switch A up or down.
Memory for driver's seat
Raising/lowering seat at front
You can use the recall buttons in the driver's door to store
and recall the seat adjustments for two drivers.
B
– Press the front of switch A up or down.
Raising/lowering seat at rear
B
– Press the rear of switch A up or down.
Adjusting backrest angle
C
– Press switch A forwards or backwards.
Extending or shortening the thigh support*
D
– Lift the control A below the seat cushion. The front seat
Fig. 77 Driver's door:
Seat memory
cushion will spring forward.
– Slide the seat cushion back to the normal position after
each use.
As well as the driver's seat position, the seat memory will store and
recall the exterior mirror settings (if the vehicle is equipped accord-
ingly):
Controls
Safety
Driving tips
General maintenance
Self-help
Technical data
English 
