Storage and convenience
Reversible cargo floor
Applies to: vehicles with reversible cargo floor
Applies to: allroad
Fig. 92 Roof rail: mounting points
If luggage or cargo is to be carried on the roof,
you must observe the following:
Fig. 89 Luggage compartment: cargo area floor
– These roof racks are the basis for a complete
roof rack system. Only roof racks that are suita-
ble for your vehicle may be used. Audi recom-
mends roof racks and attachments from the
Audi Genuine Accessories program.
– Make sure the roof rack is mounted on the vehi-
cle only at the specified locations 1 or 2 .
– Note the permitted axle load, permitted total
weight, and permitted roof load of your vehicle
ðpage 300. The roof load is the total of the
weight of the roof rack, the attachments, and
the cargo you are carrying. However, you must
also note the permitted load of the carrier sys-
tem being used.
Fig. 90 Luggage compartment: cargo area floor reversed
You can transport dirty and damp objects on the
reversible cargo area floor.
Reversing the cargo floor
►
Lift up the cargo floor using the handle
ðfig. 89.
WARNING
►
Flip the cargo floor over and install it ðfig. 90.
– Follow the installation instructions provided
with the roof rack system. If you do not se-
cure the roof rack system and objects on the
roof correctly, they could come loose from
the vehicle and cause an accident.
Roof rack
General information
Applies to: vehicles with roof rack mount
– The risk of an accident increases when using
a roof rack system, because it changes the
driving characteristics by shifting the center
of gravity and/or the increasing the surface
area exposed to wind. You may need to
adapt your driving style and speed to the
current conditions.
Note
Make sure that the open luggage compart-
ment lid and the tilting/sliding sunroof* or
panoramic glass roof* do not come into con-
tact with objects on the roof.
Applies to: sedan
Fig. 91 Roof: mounting points
91
English 
