2016-2025 Audi A4 4 Door Infotainment system -> Phone User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Infotainment system -> Phone for Your Audi A4 4 Door Fifth Generation (2016-2025)

Storage and convenience  
Applies to: vehicles with luggage compart-  
ment cover: The luggage compartment cov-  
er must always be securely fastened when in  
use to reduce the risk of an accident.  
Loose objects can be thrown around the ve-  
hicle interior during sudden driving or brak-  
ing maneuvers, which increases the risk of  
an accident. Always stow objects securely in  
the luggage compartment and secure them  
at the tie-downs. Use straps suitable for  
heavy objects.  
The backrest must be latched securely to en-  
sure that the safety belt is protecting the  
center seating position.  
Always pull forward on the backrest to make  
sure it is correctly locked in place.  
If the safety belt becomes caught when fold-  
ing the backrest back, then fold the backrest  
forward again and release the safety belt.  
Hold the safety belt with one hand and fold  
the backrest back carefully.  
For stability reasons, the bag hooks* can  
hold a maximum weight of 6.6 lbs (3 kg).  
Heavier objects are not adequately secured.  
There is risk of personal injury.  
If pieces of luggage or objects are secured to  
the tie-downs with unsuitable or damaged  
straps, this can increase the risk of injury  
during braking maneuvers or accidents.  
When transporting heavy objects, the vehi-  
cle characteristics will change due to the  
shift in the center of gravity, which increases  
the risk of an accident. You may need to  
adapt your driving style and speed to the  
current conditions.  
Note  
To reduce the risk of damage, move the rear  
head restraints down ðpage 70 before  
folding the rear backrests forward.  
When folding the backrest forward, make  
sure the outer safety belts are in the belt  
guide recess so that they do not get pinched  
in the backrest lock and damaged. Other ob-  
jects should be removed from the rear  
bench seat to protect the backrest from  
damage.  
Never exceed the permitted axle and load  
and vehicle weight ðpage 300.  
Never secure a child safety seat to the tie-  
downs.  
Never leave your vehicle unattended, espe-  
cially if the luggage compartment lid is  
open. Children could enter the luggage com-  
partment and close the luggage compart-  
ment lid from the inside. This increases the  
risk of death, since the children would be  
locked inside and may not be able to escape  
by themselves.  
If you move the front seat back when the  
rear seat backrest is folded forward, you  
could damage the head restraints on the  
rear seat.  
Make sure that the heating grid strips for  
the rear window defogger are not damaged  
by abrasive objects.  
Do not allow children to play in or on the ve-  
hicle. Close and lock the luggage compart-  
ment lid as well as all other doors when you  
leave the vehicle.  
Applies to: vehicles with manual luggage  
compartment cover: Let the luggage com-  
partment cover roll up slowly to reduce the  
risk of damage.  
Never transport persons in the luggage  
compartment. Each person in the vehicle  
must be secured correctly in the vehicle us-  
ing the safety belts ðpage 70.  
Applies to: vehicles with partition net: Let  
the partition net roll up slowly to reduce the  
risk of damage.  
Be careful when releasing the backrest and  
folding it forward. To reduce the risk of be-  
ing pinched, pay attention and check when  
folding backrests forward.  
Tips  
The tire pressure must be adapted to the  
load ðpage 259.  
You can purchase straps at specialty stores.  
The backrest must be securely latched so  
objects cannot slide forward out of the lug-  
gage compartment during sudden braking.  
87  
Storage and convenience  
Power luggage compartment cover  
Folding the outer backrests  
Applies to: vehicles with power luggage compartment cover  
Applies to: vehicles with folding backrests  
Fig. 78 Luggage compartment: retracted cover  
Fig. 80 Outer backrest: release lever, latching indicator  
with red marking and lock*  
Fig. 79 Luggage compartment: removing the luggage  
compartment cover  
Applies to: allroad:  
Fig. 81 Luggage compartment: release lever  
Observe the safety precautions ðpage 86.  
Depending on the vehicle equipment, it may be  
possible to fold the backrests forward separately  
or together.  
If you open the luggage compartment lid, the  
power luggage compartment cover will move in-  
to position 1 or 2 .  
Observe the safety precautions ðpage 86.  
To attach the luggage compartment cover, pull  
the cover out. Guide the cover past position  
and install it at position 2 .  
1
Folding the outer rear backrests forward and  
backward  
To remove the luggage compartment cover, de-  
tach the cover and allow it to roll up.  
Pull the lever 3 firmly in the direction of the  
arrow and remove the cover upward.  
To install the luggage compartment cover,  
place the cover in the side trim panel mount on  
the left side.  
Pull the release lever 1 or 4 in the direction  
of the arrow to fold the backrest forward.  
After the transport, fold the backrest up again  
until it latches and the red marking 2 is no  
longer visible.  
Locking the outer backrests  
Applies to: sedan  
Press the cover down into the right mount until  
it locks into place.  
To prevent access to the luggage compartment  
from the vehicle interior, the backrests can be  
locked with the mechanical key ðpage 39 in the  
lock 3 when the backrests are latched in place.  
88  
Storage and convenience  
Folding the center armrest  
Partition net (upright backrest position)  
Applies to: vehicles with folding center armrest  
Applies to: vehicles with partition net  
Fig. 82 Center backrest: folding the backrest forward  
Fig. 84 Behind the backrest: hanging the partition net  
Applies to: sedan  
Fig. 85 Behind the backrest: removing the partition net  
Fig. 83 Center backrest: folding the backrest forward  
The partition net prevents objects from sliding  
from the luggage compartment into the passen-  
ger compartment.  
Observe the safety precautions ðpage 86.  
Folding the center rear backrest forward and  
backward  
Observe the safety precautions ðpage 86.  
Pull on the upper release lever 1 and fold the  
Setting up/storing the partition net  
backrest forward 2 .  
Fold the backrest backward until it locks into  
place.  
To set up the partition net, pull it upward.  
Attach the crossbrace to the mounting eyelets  
above the backrest ðfig. 84.  
To store the partition net, remove the cross-  
member from the mounting eyes and let the  
partition net roll up slowly.  
Locking and unlocking the center backrest  
Applies to: sedan  
To prevent access to the luggage compartment  
from the vehicle interior, the center backrest can  
be locked and unlocked from the luggage com-  
partment.  
Removing/installing the partition net  
To install the partition net, slide it into the left  
and right mounts on the side trim panel.  
Press the partition net down diagonally at the  
left and right until it locks into place and the  
red markings on the buttons are no longer visi-  
ble.  
To lock or unlock the backrest, turn the locking  
mechanism on the backrest into the horizontal  
or vertical position ðfig. 83.  
To remove the partition net, press the left and  
right buttons on the net and lift it upward to  
remove it ðfig. 85.  
89  

Related Topics

Popular Owner Manuals