Get Seats and storage -> Seat memory Guide for Audi A5 4 Door First Generation (2007-2013)

Seats and storage74

When the front seats are moved forward, their original positions are

stored in a memory. The seats then stop automatically in this posi-

tion when they are moved back. If you want to move one of the seats

back further, release the switch and press it again.

The head restraints on the front seats retract automatically

(depending on the seat height setting) when the backrests are

tipped forward, and move back to their original positions when the

backrests are returned to the upright position.

Note

The easy-entry switches on the relevant seat are out of action when

the driver's or passenger's doors are closed.

Seat memory

Applies to vehicles: with seat memory

Memory for driver's seat

You can use the recall buttons in the driver's door to store

and recall the seat adjustments for two drivers.

As well as the driver's seat position, the seat memory will store and

recall the exterior mirror settings (if the vehicle is equipped accord-

ingly):

Storing and recalling settings

You can store and recall the settings for two different drivers using

the recall buttons 1 and 2 ⇒ fig. 76 ⇒ page 74.

In addition, the current settings are automatically stored when you

lock the vehicle and assigned to the remote control key that is being

used. When you unlock the vehicle, the system automatically recalls

the settings stored on that remote control key.

Switching seat memory on and off

The seat memory will be out of action if the switch is in the

raised position (press and release). The word OFF will then light up

in the switch.

The stored settings will all remain in the memory. We recommend

using the switch to deactivate the seat memory when the

vehicle is being driven temporarily by a different driver whose

settings do not need to be stored in the system.

Applies to vehicles: with seat memory

Storing and recalling settings

The switch must be in its down position (pressed

in) before you can store and recall the desired settings.

Storing settings

– Adjust the driver's seat as required.

– Adjust both exterior mirrors.

– Press and hold the button. At the same time press

one of the recall buttons for at least a second.

– Then release the buttons. The settings are now stored on

the selected recall button.

Fig. 76 Driver's door:

Seat memory

ON/OFF

SET

document_0900452a8179700c.book Seite 74 Donnerstag, 22. März 2007 10:19 10

Seats and storage 75

Controls Safety Driving tips General maintenance Self-help Technical data

Recalling settings

– If the driver's door is open, press the desired recall

button briefly.

– If the driver's door is closed, press and hold down the

desired recall button until the programmed settings are

reached.

A tone will sound and the diode in the button ⇒ page 74,

fig. 76 will light up to confirm that the settings have been stored.

When you lock the vehicle the current settings are automatically

stored and assigned to the remote control key. However, the

settings assigned to the remote control key will not overwrite the

settings stored on recall buttons 1 and 2. The settings stored on the

recall buttons can be called up at any time. When you unlock the

vehicle, the settings assigned to the remote control key are recalled

automatically.

If your vehicle is also driven by other persons using your remote

control key, it is advisable to store your personal settings on one of

the recall buttons. You can then recall your own settings at any time

simply by pressing the corresponding recall button. When you lock

the vehicle these settings are then stored automatically and

assigned once again to the remote control key.

WARNING

• For safety reasons, never recall seat settings when the vehicle

is moving - this could lead to an accident.

• In an emergency the recall function can be stopped at any time

by pressing the switch, or by briefly pressing any of the

recall buttons.

Applies to vehicles: with seat memory

Activating memory for remote control key

The relevant function must be activated on the sound

system or MMI so that the settings stored in the memory

can be recalled using the remote control key.

– Select: Function selector button > Seat adjustment

> Driver's seat > Remote control key > on.

SET

ON/OFF

Fig. 77 MMI display:

Driver's seat

CAR

document_0900452a8179700c.book Seite 75 Donnerstag, 22. März 2007 10:19 10

Seats and storage -> Seat memory for Your Audi A5 4 Door First Generation (2007-2013)

Related Topics

Popular Owner Manuals

Latest Owner Manuals