2025-2026 Audi A5 4 Door Driving -> Start/Stop system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Start/Stop system for Your Audi A5 4 Door Third Generation (2025-2026)

Driving  
If certain conditions are met, the engine may  
stop before the vehicle has come to a complete  
stop. If you release the brake pedal or press the  
accelerator pedal when this happens, the engine  
will start and driving power will be transmitted.  
electricity. This significantly improves the start-  
ing ability and increases the vehicle battery life.  
Tips  
If you drive short distances frequently, the  
vehicle battery may not charge enough  
while driving. As a result, convenience func-  
tions for electrical equipment may be tem-  
porarily unavailable.  
The ignition and important assist systems such  
as the brake booster will remain available during  
the Stop phase. The engine will restart automati-  
cally when needed.  
The vehicle battery will gradually drain if  
the vehicle is not driven for long periods of  
time, or if electrical equipment is used  
when the engine is not running. To ensure  
that the vehicle can still be started, the  
electrical equipment will be limited or  
turned off.  
The Start/Stop system is automatically activated  
once the ignition is turned on.  
Turning the Start/Stop system off or on  
The button is located in front of the trans-  
mission selector in the center console. The but-  
ton will be illuminated when the function is  
turned off.  
Messages  
Press to turn on or off.  
The following messages may appear, depending  
on the vehicle equipment:  
If you turn off the system during a Stop phase,  
the engine will start again automatically.  
Drive system: malfunction! Safely stop vehi-  
Basic requirements  
cle  
The driver’s door and the hood must be closed  
and the driver’s safety belt must be fastened.  
The "P", "N", or "D" position must be engaged.  
The steering wheel must not be turned far in ei-  
ther direction.  
There is a malfunction in the drive system. The  
brake booster and the power steering may stop  
working. Stop the vehicle immediately or as soon  
as possible and do not continue driving. Secure  
the vehicle against rolling before exiting the vehi-  
cle ðpage 98. Have the problem corrected by an  
authorized Audi dealer or authorized Audi Service  
Facility.  
The vehicle must have driven faster than 2 mph  
(3 km/h) since the last time it stopped.  
The vehicle is not in trailer mode.  
Drive system: malfunction! Please contact  
Note  
Service  
Always turn off the Start/Stop system when  
driving through water ðpage 105.  
There is a malfunction in the drive system. The  
driving power is limited. Drive slowly to an au-  
thorized Audi dealer or authorized Audi Service  
Facility to have the malfunction corrected.  
Tips  
Depending on the driving situation, the en-  
gine may already stop when coasting before  
the vehicle has come to a complete stop.  
If you select the "D" position after shifting  
into reverse, the vehicle must be driven fast-  
er than 6 mph (10 km/h) in order for the  
Start/Stop system to become active again.  
This makes it possible to maneuver without  
stopping the engine.  
Start/Stop system  
Description  
Applies to: vehicles with Start/Stop system  
The Start/Stop system can help increase fuel  
economy and reduce CO emissions. In Start/  
2
Stop mode, the engine shuts off automatically  
when stopped, for example at a traffic light.  
105  
Driving  
Battery (charge status, temperature, power us-  
Stopping and starting the engine  
age)  
Applies to: vehicles with Start/Stop system  
Engine temperature  
Assist systems  
Driving behavior  
Press and hold the brake pedal until the vehicle  
has stopped. The indicator light appears in  
the instrument cluster once the engine stops  
automatically.  
Depending on the engine, the  
. indicator light  
The engine starts again when you remove your  
may appear if the engine is not stopped.  
foot from the brake pedal. The indicator light  
turns off.  
Messages  
Applies to: vehicles with Start/Stop system  
If the parking brake is set, the engine will only  
start again when the accelerator pedal is press-  
ed.  
The following messages may appear, depending  
on the vehicle equipment:  
Drive system: please start the vehicle manually  
Tips  
This message appears when specific conditions  
are not met during a Stop phase. The Start/Stop  
system will not be able to restart the engine. The  
engine must be started with the  
Press the brake pedal during a Stop phase  
to keep the vehicle from rolling.  
The ignition will turn off if you press the  
START ENGINE STOP  
button during a Stop  
START ENGINE STOP  
button.  
phase.  
If you leave the vehicle briefly during a Stop  
phase and then enter again, the driver's  
door must be closed and the safety belt  
must be fastened in order for the engine to  
be able to restart.  
Vehicle starting system: malfunction! Please  
contact Service  
There is a malfunction in the Start/Stop system.  
Drive the vehicle to an authorized Audi dealer or  
authorized Service Facility as soon as possible to  
have the malfunction corrected.  
You can control if the engine will stop or not  
by reducing or increasing the amount of  
force you use to press the brake pedal. For  
example, if you only lightly press on the  
brake pedal in stop-and-go traffic or when  
turning, the engine will not turn off when  
the vehicle is stationary. If you press the  
brake pedal harder, the engine will turn off.  
Brakes  
General information  
You can apply the vehicle's brakes using the brake  
pedal.  
Operating noise  
Starting and stopping the engine automat-  
ically  
Noises may occur when braking depending on the  
speed, braking force, and outside conditions such  
as temperature and humidity.  
Applies to: vehicles with Start/Stop system  
The system checks if certain conditions are met  
before and during the Stop phase, and deter-  
mines if the engine stops and how long it re-  
mains stopped. For example, if power usage is  
high, the engine will not be stopped. Along with  
other conditions, the following factors influence  
the automatic engine start or stop:  
Braking effect  
To ensure an optimal braking effect, the brake  
pads will be applied to the brake rotors for a  
short period of time when driving at high speeds  
while the windshield wipers are turned on.  
If the brake system becomes damp, for example  
after driving in heavy rain, the braking effect may   
Environmental conditions (slopes, inclines, ele-  
vation, temperature)  
106  

Related Topics

Popular Owner Manuals