2025-2026 Audi A5 4 Door Opening and closing -> Garage door opener User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Opening and closing -> Garage door opener for Your Audi A5 4 Door Third Generation (2025-2026)

Opening and closing  
If the indicator light appears with a corre-  
sponding message, the vehicle key battery is  
drained and must be replaced.  
off the ignition and take the key with you  
when leaving the vehicle.  
Note  
The following buttons are deactivated when the  
valet parking function is turned on:  
Always close the roof when you leave the vehi-  
cle and when there is precipitation to reduce  
the risk of damage to the interior equipment,  
particularly the electronic equipment.  
Button in the driver's door  
Button on the vehicle key  
Handle in the luggage compartment lid  
ðpage 44, fig. 31  
Tips  
If the valet parking function is turned on, a mes-  
sage will appear every time the ignition is turned  
on.  
After turning off the ignition, the roof and  
sunshades can still be operated for several  
minutes as long as neither of the front  
doors have been opened.  
Tips  
It is not possible to open the roof when tem-  
peratures are too low.  
Please note that the luggage compartment  
can still be accessed from the vehicle interior  
in vehicles with fixed rear seat backrests or  
ones that cannot be locked, even when the  
valet parking function is turned on.  
Valet parking  
Applies to: vehicles with valet parking function  
The valet parking function can protect the lug-  
gage compartment from unauthorized access.  
Garage door opener  
VALET  
The  
button for valet parking is in the  
Description  
Applies to: vehicles with garage door opener  
glove compartment.  
You can turn on the valet parking function, for ex-  
ample when someone else is parking your vehi-  
cle . The vehicle can be driven, locked, and un-  
locked using the vehicle key, but access to the  
luggage compartment is blocked.  
With the garage door opener, you can activate  
systems such as the garage doors, security sys-  
tems, or house lights from inside your vehicle.  
The functions are operated on the rearview mir-  
ror. Multiple receivers that can control the func-  
tions of up to three hand-held transmitters can  
be programmed. A menu guide will be shown in  
the MMI when operating the functions.  
1)  
Remove the mechanical key ðpage 40.  
VALET  
Press the  
button in the glove compart-  
ment. The LED in the button turns on if the  
function is turned on.  
Lock the glove compartment with the mechani-  
cal key.  
WARNING  
When operating or programming the garage  
door opener, make sure that no people or  
objects are in the area immediately sur-  
rounding the equipment. People can be in-  
jured or property can be damaged if struck  
when closing.  
Applies to: vehicles with lockable backrests in  
the rear: To also secure the luggage compart-  
ment from the vehicle interior, lock the backr-  
ests in the rear of the vehicle ðpage 89.  
Give your vehicle key to the service personnel  
who are parking your vehicle and keep the me-  
chanical key.  
Do not allow yourself to be distracted from  
traffic by viewing and operating the center  
display.  
1)  
This function is not available in all countries.  
51  
Opening and closing  
Programming  
Applies to: vehicles with garage door opener  
Tips  
If you sell your vehicle, reset all settings to  
the factory default settings ðpage 231.  
The system complies with United States FCC  
regulations and ISED regulations  
ðpage 310.  
You can program both fixed code and rolling code  
systems in the MMI using the procedure that is  
described.  
Requirement: the ignition must be turned on.  
If programming has been started, the symbol  
on the rearview mirror will flash orange.  
Tips  
Before you program your system to the ga-  
rage door opener, first check the compatibili-  
ty:  
Programming the system  
Applies to: MMI  
Ask an authorized Audi dealer or authorized  
Audi Service Facility or check at www.  
homelink.com. You can also find more infor-  
mation about HomeLink there.  
Requirement: the hand-held transmitter must be  
present and the vehicle must be within range of  
the system (such as the garage door) that you  
would like to program.  
You can display information about Home-  
Link (compatibility level/status/country  
code/HomeLink generation) in the MMI:  
Select on the home screen: VEHICLE > Set-  
tings & Service > Garage opener > .  
If you would like to program a system, select on  
the home screen: VEHICLE > Settings & Service  
> Garage opener. Press the desired button  
(1-3). Follow the instructions in the MMI. Or  
Press the corresponding button in the garage  
door opener on the rearview mirror. Follow the  
instructions in the MMI.  
If you would like to reprogram systems that are  
Operation  
Applies to: vehicles with garage door opener  
already programmed, select on the home  
screen: VEHICLE > Settings & Service > Garage  
opener. Press the button you would like to pro-  
gram (1-3) with the opener system. Follow the  
instructions in the MMI.  
With some systems, the garage door opener will  
be available immediately after programming.  
With other systems, the garage door opener  
must also be synchronized. In this case, the   
symbol on the rearview mirror will flash white  
quickly.  
Fig. 41 Rearview mirror: buttons for the garage door open-  
er  
Requirements: the remote control transmitter  
must be programmed ðpage 52, Program-  
ming, the vehicle must be within range of the  
system, and the ignition must be turned on.  
1)  
Synchronizing  
Requirement: the hand-held transmitter must al-  
ready be programmed and the vehicle must be  
within range of the system (such as the garage  
door).  
To open or close the system (such as the garage  
door), press the corresponding button on the  
rearview mirror.  
If the system synchronization is performed di-  
rectly after the programming procedure, follow  
the instructions on the MMI.  
If the signal was transmitted successfully, the   
symbol on the rearview mirror will flash white.  
1)  
Only applies to rolling code systems  
52  
Opening and closing  
If you would like to sync at a later time:  
Applies to: MMI: Select on the home screen:  
VEHICLE > Settings & Service > Garage opener.  
Press the desired button (1-3) that you would  
like to synchronize and then press Sync.  
Follow the instructions in the MMI.  
Deleting programmed systems  
Opener systems that are programmed can be de-  
leted individually.  
Applies to: MMI: Select on the home screen:  
VEHICLE > Settings & Service > Garage opener.  
Press the button (1-3) with the programming  
you would like to delete and press Delete.  
Tips  
Make sure the batteries in the hand-held  
transmitter are charged before starting the  
programming process.  
The programming process may take up to  
30 seconds. It may be necessary for the  
hand-held transmitter to be pressed again  
in the meantime.  
The garage door opener may need to be  
synchronized with the system after pro-  
gramming. Follow the manufacturer's in-  
structions for doing this.  
Tips  
In some cases, the system may need to be  
programmed in a different mode (“D mode”).  
Turn on the ignition.  
Applies to: MMI: Select on the home screen:  
VEHICLE > Settings & Service > Garage  
opener.  
Press and hold the desired button (1-3).  
Select Yes, in D mode and follow the in-  
structions on the MMI.  
53  

Related Topics

Popular Owner Manuals