Further settings
►
Press Add new device to connect your mobile
device. The available Bluetooth devices will be
shown after a few seconds.
lowing settings for your mobile devices via the
symbols in the Connection manager menu
ðpage 221 and the device options:
►
Press on the desired mobile device.
– Using as a mobile phone
►
Follow the instructions given by the system and
observe any other notifications on your mobile
device.
– Using as a Bluetooth audio player
– Using Apple CarPlay/Android Auto
– Setting as preferred device
After the mobile device has been connected suc-
cessfully, it will be shown in the Connection
manager menu ðpage 221.
– Sending phone number in an emergency call
– Disconnecting a mobile device
– Deleting a mobile device
Both the displayed mobile devices, as well as the
automatic reconnection are independent from
the user logged in to the vehicle.
Software update
Introduction
There are different reasons as to why the Blue-
tooth connection between your mobile device
and the MMI can fail. Check the following condi-
tions and, if necessary, try connecting the device
again.
You can update the software in your vehicle.
The functions depend on the country and the
equipment fitted in your vehicle:
1)
– Performing software updates
– Performing online map updates
– The Bluetooth menu must be open in the fore-
ground on your mobile device during the con-
nection procedure.
– Performing software updates at your Audi deal-
ership. This may lead to additional costs.
– Your mobile device is not be connected to any
other Bluetooth device.
Checking the software version in your
vehicle
– Your mobile device is within range of the MMI.
– The connection request PIN on your mobile de-
vice is the same as on the MMI and has been
confirmed.
You can check the software version installed in
your vehicle in the Settings menu ðpage 221.
The software version of your vehicle is displayed
under Installed software version.
You can also search for the MMI on your mobile
device using the Bluetooth device search.
1)
Performing a software update
Managing mobile devices
You can update the software directly in the vehi-
cle via a software update.
Important: The vehicle must be stationary and
switched on. The Connection manager menu is
displayed ðpage 221.
Downloading a software update
Important: The MMI must be connected to the in-
ternet.
Calling up device options
►
Press .
Software updates are downloaded automatically
without prior notification. If necessary, the
Setting device use
download is resumed automatically when the ve-
hicle is switched back on. A notification is shown
Depending on the country and vehicle equipment
and your mobile device, you can adjust the fol-
1)
The function/equipment described was in the planning
phase at the time of publication and may not be available
in your vehicle.
222
English 
