2019-2025 Audi RS6 4 Door Touch displays User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Touch displays for Your Audi RS6 4 Door Fourth Generation (2019-2025)

Touch displays  
►
Press on any position on the scale and drag the  
slider to the desired value.  
Touch displays  
Gestures and input  
Gesture control for touch displays  
Selecting a function or button  
Changing the view or angle  
►
Spread two fingers to make an object larger.  
►
Pinch two fingers together to make an object  
smaller.  
►
Press the desired function or button.  
►
Use two fingers to turn an object.  
►
Swipe up/down with two fingers to tilt a 3D  
Opening a context menu  
view.  
For certain objects, you can open a context menu  
which is not immediately visible.  
Entering text on touch displays  
►
Press and hold an object until the context menu  
You can enter letters, numbers and characters in  
entry fields, e.g. to find an address in the naviga-  
tion system. You can enter characters or words  
using the keyboard, handwriting recognition or  
speech recognition.  
is shown.  
Moving objects  
Certain objects can be moved, e.g. their position  
can be changed:  
►
Press and hold the object and move it to the de-  
Overview of keyboard symbols  
sired position.  
You can create folders with several objects in  
Symbol  
Description  
►
To change the input language  
certain areas by pressing and holding an object  
and dragging it on top of another one.  
To switch to handwriting recogni-  
tion  
Switching between pages  
To switch to the keyboard  
To minimise the keyboard  
To minimise handwriting input  
The white bars at the bottom indicate the  
position of the current page.  
►
To switch between pages, swipe to the right/  
Entering text  
left with one finger.  
– Applies to on-screen keyboard: You can enter  
text by pressing the keys on the on-screen key-  
Scrolling through pages/lists  
►
To scroll through a page/list, swipe up/down  
board. In certain contexts, you can also swipe  
with one finger.  
1)  
your finger over the letters  
.
– Applies to handwriting recognition: Text can be  
entered by simply writing with your finger in  
the entry area. You can write individual charac-  
ters one over the other or one after the other  
without having to lift your finger from the  
screen. When you have finished, the system  
will interpret what you have written.  
Opening/closing a hidden view  
►
To open a hidden view, swipe from the edge  
(e.g. from the top or left edge) of the display  
towards the centre of the display.  
►
To close a hidden view, swipe from the centre of  
the display towards the edge, or press any-  
where on the display.  
– Applies to on-screen keyboard with diacritical  
marks: To enter diacritical marks (e.g. â, ç, ñ,  
ö), press and hold the appropriate character  
and select the desired diacritical mark.  
Using sliders  
►
To change the scale of a slider, press the slider  
and drag it to the desired value, or  
1)  
May vary in different countries.  
20  
Touch displays  
►
– Applies to handwriting recognition: To enter a  
space, draw a line from left to right in the en-  
try area.  
In an app, the next element of the path descrip-  
tion may be in a list or in the tab area. In this  
example, the More menu is in the tab area.  
Press More.  
If Steering wheel button is not displayed,  
swipe up/down with one finger until it appears.  
Press Steering wheel button.  
1)  
►
►
– To select the position where the text is entered,  
press within the entry field at the desired posi-  
tion. You can adjust the position even more pre-  
2)  
►
cisely using the slider displayed on the  
screen.  
– To delete a single character, press , or  
– Applies to handwriting recognition: Draw a line  
from right to left in the entry area.  
Overview of displays on  
Multi Media Interface  
1)  
Introduction  
– To delete more than one character, press and  
hold .  
You can display and operate different infotain-  
ment and vehicle functions using the touch func-  
tion of the Multi Media Interface (MMI).  
Information on path descriptions  
The path descriptions in the Owner's Manual  
show you how to open the app you require along  
with its settings and functions.  
Setup wizard  
After switching on the system for the first time,  
you can use the wizard to set up your vehicle, e.g.  
to select the desired system language and con-  
figure the privacy settings.  
Menus or symbols in the path description that  
are shown in brackets, e.g. (), are optional  
menu items which do not need to be selected in  
all systems.  
Order of lists  
Certain lists, such as the radio station list, are ar-  
ranged alphabetically. Lists with messages or  
current notifications are arranged by date.  
Example of a path description  
►
Select: > Car > More > Steering wheel but-  
ton.  
Notes on traffic safety  
Using a path description  
►
The first part of the path indicates which dis-  
Certain functions are not available while the vehi-  
cle is in motion. In addition, Audi recommends  
that certain infotainment functions should not  
be used unless the vehicle is stationary, e.g. en-  
tering a destination or connecting a mobile de-  
vice. Always be prepared to stop operating the in-  
fotainment system in the interest of your own  
safety and that of other road users.  
play is to be used. If the path description does  
not specify a particular display (e.g. “Se-  
lect: ...”), it primarily applies to the centre dis-  
play and may also apply to the passenger dis-  
play. If the path description specifies a display,  
it only applies to this display.  
►
Press in the direct access panel. The app  
overview will appear.  
►
Select the specified app in the app overview  
WARNING  
(Car in this example). If the Car app is not dis-  
played, swipe up/down with one finger until it  
appears.  
– Only operate the infotainment system when  
the road, traffic, visibility and weather con-  
ditions allow you to do so safely and when  
you can maintain proper control of your ve-  
hicle – risk of accident!  
1)  
If the input language is set to Arabic, make the gestures  
described in the opposite direction.  
2)  
May vary in different countries.  
21  
Touch displays  
5 Tab area in an app  
– The same applies when operating your mo-  
bile device via the MMI. Do not let visual/  
acoustic signals from a mobile device dis-  
tract your attention from the road – risk of  
accident!  
A tab area may be shown at the top of an app.  
The different objects in the tab area are used to  
navigate within the app.  
Hidden views on the centre display  
Centre display user interface  
The hidden views are not always visible on the  
centre display and can be opened via gesture con-  
trol. Hidden views include the quick access bar  
and the notification centre.  
Opening/closing a hidden view via gesture  
– To open the quick access bar, swipe from the  
side edge (e.g. from the left edge) of the dis-  
play towards the centre.  
– To open the notification centre, swipe from the  
top edge of the display towards the centre.  
– To close a hidden view, swipe from the edge of  
the display towards the centre.  
Fig. 4 Centre display: User interface  
1 Display area  
Quick access bar  
Possible displays in the display area:  
– Overview pages  
The quick access bar contains a selection of func-  
tions and apps that can be accessed directly. The  
order of the objects can be customised.  
– App overview  
– App content  
2 Air conditioner control bar  
Notification centre  
The air conditioner control bar is always visible,  
even if the display is switched off.  
Incoming notifications are hidden after a certain  
period and stored in the notification centre. A  
corresponding notification symbol appears on  
the side.  
3 Status bar  
The status bar displays various pieces of informa-  
tion on the vehicle and connected devices, such  
as the connection status of a mobile phone or  
whether there is a driver message in the notifica-  
tion centre.  
– To delete a notification from the notification  
centre, drag it to the edge of the screen.  
Goodbye screen on the centre display  
4 Direct access panel  
The goodbye screen is shown on the centre dis-  
play before you leave the vehicle. It displays a  
range of settings that you can change before you  
get out of the vehicle.  
You can add several apps of your choice from the  
app overview to the direct access panel. The ob-  
jects and cannot be moved.  
– To show the goodbye screen, park the vehicle  
– To add an app to the direct access panel, drag it  
from the app overview to the direct access pan-  
el.  
START STOP  
safely and press the  
button.  
22  
Touch displays  
MMI passenger display user interface  
Symbol  
Description  
>
Call up additional functions  
Call up further information  
Delete object  
Overview of symbols and functions in the  
quick access bar  
The following table shows the functions that may  
be available in the quick access bar:  
Fig. 5 Passenger display: Overview of user interface  
1 Display area  
Symbol  
Description  
Possible displays in the display area:  
– Overview page  
Open configuration mode  
Open head-up display settings  
– App overview  
Switch lane departure warning  
on/off  
– App content  
2 Direct access panel  
Open Car app  
You can add several apps of your choice from the  
app overview to the direct access panel. The ob-  
jects and cannot be moved.  
Open Driver assist app  
Open/close rear window blind  
Open interior lighting settings  
Open privacy settings  
Open sound settings  
3 Tab area in an app  
A tab area may be shown at the top of an app.  
The different objects in the tab area are used to  
navigate within the app.  
Switch vehicle’s Bluetooth inter-  
face on/off  
Switch vehicle hotspot on/off  
Switch Wi-Fi on/off  
Overview of MMI symbols  
Set system language  
The symbols below allow you to control standard  
functions. These symbols may appear in all apps  
in the appropriate context.  
Open connection manger  
Operate garage door opener  
Symbol  
Description  
Overview of status bar symbols  
Call up overview page  
Open app overview  
Go back one level  
Close view  
The following table shows the symbols that may  
be shown in the status bar:  
Symbol  
Description  
Search for content  
Call up explanations  
Call up settings for selected app  
A personalised user symbol is  
shown when a user is logged in.  
The symbol appears when the  
guest user is logged in.  
//Change settings  
Press: To open user management  
/  
/  
/  
/  
Store/delete favourite  
A mobile phone is connected. The  
bars indicate the strength of the  
mobile reception.  
Switch functions on/off  
Wi-Fi hotspot connected  
23  
Touch displays  
Changing the track/station  
Symbol  
Description  
A data connection is available. The  
bars indicate the strength of the  
data connection. Data transfer is  
in progress.  
Changing the track/station using the MMI  
control dial  
►
To select the previous or next track/station,  
briefly push the MMI control dial to the left or  
right.  
One of the privacy settings is acti-  
vated. The symbol shown depends  
on the privacy setting that is acti-  
vated.  
Changing the track/station using the multi-  
function steering wheel  
►
Driver messages are available.  
To select the previous or next track/station,  
press the or button.  
Electronic toll collection system  
available  
Operating a function via the steering wheel  
button  
Using and customising  
the MMI  
The button on the multi-function steering  
wheel can be used to operate a specific MMI func-  
tion. You can select the function it accesses from  
a pre-defined list.  
Adjusting the audio and system volume  
You can adjust the volume of an audio source or  
system message (e.g. from the Audi assistant)  
while it is being played.  
►
To use the function that is currently program-  
med, press the button.  
►
To find out which function is currently program-  
med or to change the function, press and hold  
Adjusting the volume using the MMI control  
dial  
the button, or  
Select: > Car > More > Steering wheel but-  
ton.  
►
To turn the volume up or down, turn the MMI  
control dial clockwise or anti-clockwise.  
To mute the sound, press the MMI control dial.  
►
►
►
Select a different function if desired.  
Adjusting the volume using the multi-  
function steering wheel  
Starting up/shutting down or restarting  
the MMI system  
►
To turn the volume up or down, press the or   
button.  
Starting up/shutting down the MMI system  
►
To mute the sound, press the button.  
►
To shut down the MMI system, press and hold  
the MMI control dial until all the infotainment  
functions are shut down.  
To start up the MMI system, press the MMI con-  
WARNING  
The audio system volume should be set at a  
level which enables you to hear external sig-  
nals (such as the sirens of police and emer-  
gency vehicles) clearly – failure to do so could  
result in an accident.  
►
trol dial.  
Restarting the MMI system  
►
Press and hold the MMI control dial for at least  
ten seconds.  
24  
Touch displays  
Customisation options  
Switching the displays on/off  
Depending on the area/object, you may be able  
to make the following customisations:  
Switching the centre display on/off  
►
To switch the centre display off, press and hold  
– You can arrange the apps in the app overview  
and the direct access panel in any order.  
– In the app overview, you can delete downloaded  
apps via the context menu.  
the MMI control dial for approximately two sec-  
onds.  
►
Press Switch off display.  
►
Touch the centre display to switch it on.  
– You can create, rename and delete folders with  
multiple apps in the app overview.  
Switching the MMI passenger display on/off  
– You can rearrange the information boxes on the  
overview pages or change the content of the in-  
formation boxes via the context menu.  
►
To switch the MMI passenger display off, press  
on the MMI passenger display and select  
Passenger display off, or  
►
Press and hold the MMI control dial for approx.  
Creating and managing folders  
2 seconds and select the following on the cen-  
tre display: Passenger display off > Switch off.  
To switch the MMI passenger display on, touch  
the MMI passenger display, or  
– To create a folder, press and hold an object and  
drag it onto another object.  
►
– To rename a folder, open the folder and press  
the name. Enter the desired name.  
►
Press and hold the MMI control dial for approx.  
2 seconds and select the following on the cen-  
tre display: Passenger display on.  
There is a context menu for each folder and the  
objects it contains. You can use this menu to re-  
move individual objects from the folder or to de-  
lete the entire folder.  
Switching the standby design for the MMI  
passenger display on/off  
Changing the brightness of the MMI  
The passenger display has a standby mode. Only  
a screensaver is displayed in this mode. You can  
change the screensaver in the Car menu  
ðpage 26.  
You can change the brightness of the MMI in the  
Car menu ðpage 26.  
►
Using accessibility functions on the MMI  
To switch the standby design on, press and  
select Standby design on, or  
►
Press and hold the MMI control dial for approx.  
2 seconds and select the following on the cen-  
tre display: Passenger display off > Standby  
design.  
The accessibility functions on the MMI can make  
it easier to use the system. Depending on the ve-  
hicle’s equipment, the following accessibility  
functions may be available:  
►
To switch the standby design off, touch the  
MMI passenger display.  
– Subtitles  
– High-contrast text  
– Magnification  
Customising the MMI system  
You can download additional accessibility func-  
tions from the digital store.  
Certain objects on the MMI can be customised.  
For example, some objects can be moved and  
context menus can be opened.  
Changing the accessibility function settings  
on the MMI  
►
To move an object, press and hold the object  
Select: > Settings > Accessibility.  
and drag it to the desired position.  
To open the context menu for a particular ob-  
ject, press and hold the object.  
You can switch certain functions on/off by press-  
ing / or change their settings by pressing  
►
>
.
25  
Touch displays  
CAUTION  
Please observe the information on Audi con-  
nect, particularly with regard to connection  
costs ð in Information on Audi connect on  
page 197.  
Opening the Car menu  
You can switch certain functions on/off or adjust  
the vehicle settings in the Car menu. The availa-  
ble settings depend on the country and the  
equipment fitted in the vehicle.  
►
Select: > Car, or  
►
Open the quick access bar on the centre display  
and press .  
You can switch certain functions on/off by press-  
ing / or change their settings by pressing  
>
.
26  

Related Topics

Gestures and input Overview of displays on Multi Media Interface Using and customising the MMI Opening the Car menu

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot