Get Heating and cooling -> Air conditioner Guide for Audi Rs Q8 SUV First Generation (2020-2026)

Heating and cooling

hicle. This is normal and does not indicate a

leak.

Heating and cooling

Air conditioner

Description

– If you notice, for instance, that the seat or

rear window heating (if fitted) is not work-

ing, it may have been temporarily switched

off by the energy management system.

These systems will be available again as

soon as sufficient electrical power is availa-

ble.

Depending on your vehicle’s equipment, one of

the following options is available:

– A 2-zone deluxe automatic air conditioner

which can be used to adjust the temperature

and air distribution at the front left and right

individually

Information on the air conditioner for the

European Union

– A 3-zone deluxe automatic air conditioner

which can be used to adjust the temperature,

air distribution and blower speed at the front

left and right and the temperature at the rear

individually.

The air conditioner contains the fluorinated

greenhouse gas known as R-1234yf.

Further information on the quantity of this

greenhouse gas, the CO equivalent and the

– A 4-zone deluxe automatic air conditioner

which can be used to adjust the temperature,

air distribution and blower speed settings for

all the seats individually

global warming potential (GWP) is provided on a

sticker in the engine compartment.

Controls

The air conditioner heats, cools, dehumidifies

and filters the air inside the vehicle. It operates

most effectively with the windows and the sun-

roof (if fitted) closed. If the vehicle has been

standing in the sun, it may cool down faster if

you open the windows briefly to let the hot air es-

cape.

The deluxe automatic air conditioner will main-

tain the desired temperature at a constant level.

When the heater is on, the blower normally only

switches to a higher speed once the coolant has

warmed up sufficiently (this does not apply to

the defrost setting).

Fig. 87 Centre console: Lower display and row of buttons

Adjustments can be made using the two displays,

the row of buttons in the centre console and the

control console in the rear cabin (depending on

the equipment in your vehicle). For information

on how to use the touch displays, refer to

ðpage 24, Touch displays.

Enhanced air filter with activated carbon

When the blower is switched on, the filter re-

duces the concentration of fine particulate mat-

ter and pollen and neutralises odours in the vehi-

cle interior.

All of the air conditioner settings are available

from the front seats; from the rear seats, only

certain functions are available.

Note

Lower display

– Keep the air intake slots in front of the

windscreen clear of snow, ice and leaves to

ensure unimpaired heating/cooling, and to

prevent the windows misting over.

The controls on the lower display are divided into

two areas:



– Condensation can drip off the air cooling

system and form a pool underneath the ve-

100

Heating and cooling

AUTO Automatic mode

In area 1 , you can select AUTO to have the blow-

ers and air distribution regulated automatically.

Individual adjustments can be made here as well.

Automatic mode regulates the air output and dis-

tribution automatically in order to reach the set

temperature as quickly as possible.

In area 2 , you can switch individual air condi-

tioner functions on/off.

REAR Air conditioner for rear cabin

Applies to: vehicles with control function for rear air condi-

tioner

Row of buttons in centre console

Area 3 contains the  and  buttons to demist

the windscreen and windows as quickly as possi-

ble. It also contains the auxiliary heating button

, depending on the equipment fitted in the ve-

hicle.

Press on REAR to enable control of the air condi-

tioning in the rear cabin.

To exit this mode, press REAR or

REAR MODE EXIT.

SYNC Synchronising

Upper display

When the sync function is switched on, the tem-

perature, air distribution and blower settings on

the driver’s side will be applied to the rest of the

vehicle. You can operate the sync function direct-

ly by making a pinch movement with two fingers

on the lower display ðpage 24.

The upper display can be used to have further

functions displayed, to switch them on/off and to

adjust settings.

►

Applies to MMI: On the home screen, select

CAR > A/C, or:

►

Press  on the lower display.

If the child lock is activated, the settings in the

front will also be applied in the rear of the vehi-

cle. To limit the use of the air conditioner in the

rear of the vehicle, select: SETTINGS > Display &

brightness > Operation in rear.

Rear control console

Applies to: vehicles with rear control console

You can use the control console to operate vari-

ous air conditioner functions for the rear cabin.

Personalising

OFF Switching off

Each of the two buttons on either side of  in

area 2 can be programmed individually to an air

conditioning function from the upper display.

The air conditioner will be switched off, and the

supply of air from outside the vehicle will be cut

off. Pressing OFF in the front cabin will switch off

the air conditioning for the front and the rear

seats. Depending on the equipment fitted in the

vehicle, you can press OFF in the rear cabin to

switch off the air conditioning for the rear seats.

To switch the air conditioner on again, press any

of the buttons on the corresponding display.

►

Press and hold the symbol of the desired func-

tion on the upper display for at least three sec-

onds. A menu with two slots will appear.

►

Drag the symbol to the left slot to program the

button to the left of .

►

Drag the symbol to the right slot to program

the button to the right of .

A/C /  /  Cooling mode

The air cooling system only works when the blow-

er is switched on. When the air cooling is switch-

ed off, the air is neither cooled nor dehumidified.

The windows may mist up as a result. The air

cooling is switched off automatically at low out-

side temperatures.

Settings

The functions can be switched on/off by pressing

the buttons or switches. When the function is

switched on, a coloured bar in the button or the

LED in the switch will light up. Some buttons

have more than one function; the different func-

tions can be activated by pressing the button re-

peatedly.

If you activate the A/C function, cooling mode

will be regulated automatically.



101

Heating and cooling

If you activate , cooling mode will operate at

maximum power and maximum airflow. This

function should only be used for short periods of

time to avoid unnecessary energy consumption.

This function can cause the windows to steam up

in unfavourable climatic conditions.

atures, depending on the equipment fitted in the

vehicle. Depending on the outside temperature,

you may be able to switch the windscreen heat-

ing on manually by pressing the  button. The

LED in the button flashes when the function is

switched on manually. The air recirculation mode

is deactivated. A/C cooling mode is automatically

switched on depending on the ambient tempera-

ture.

If you activate , the air conditioner will operate

in efficiency mode.

 /  Temperature

 Rear window heating

The temperature can be adjusted between 16 °C

(+60 °F) and 28 °C (+84 °F). Outside this range,

LOW/LO or HIGH/HI will appear on the display. In

the two extreme settings the air conditioner op-

erates continuously with maximum cooling or

heating output.

The rear window heating operates only when the

engine is running, and switches off automatically

after about 10 to 20 minutes, depending on the

outside temperature.

To switch on the rear window heating permanent-

ly, press and hold the  button for at least three

seconds. It will then remain on until the ignition

is switched off.

 Blower

You can adjust the blower speed manually using

 / . You should leave the blower on and

make sure the setting is not too low to prevent

the windows from misting up and to ensure that

the vehicle interior is constantly ventilated. Press

AUTO for automatic control of the blower speed.

 /  Air recirculation mode

In air recirculation mode, the air from the interior

of the vehicle is filtered and recirculated. This

setting prevents fumes etc. from entering the in-

terior ð

 Air distribution

To switch air recirculation mode on/off manually,

press .

To prevent the front side windows from misting

up, open the side vents and point them towards

the side windows.

Depending on the equipment fitted in the vehi-

cle, pressing  will regulate the air circulation

automatically if air pollution is detected.

You can direct the flow of air manually to selec-

ted vents using  /  / . The air distribution

can be regulated automatically by pressing AUTO

or by deactivating all three arrows. Selecting 

will direct the air to the windscreen.

 Seat heating

Applies to: vehicles with seat heating

The seat heating temperature can be adjusted in

several levels. Press  once to activate the high-

est level. Press  repeatedly to lower the tem-

perature by one level each time. When the but-

ton is not lit, the seat heating is switched off.

Applies to vehicles with 4-zone automatic air

conditioner: The air distribution can be controlled

on the rear control console by pressing  repeat-

edly until the appropriate arrow appears.

 Seat ventilation

Applies to: vehicles with seat ventilation

 Defrosting

The windscreen and side windows are defrosted

or demisted as quickly as possible. Open the side

vents and point them towards the side windows.

The air output is increased to maximum and

most of the air comes out of the vents below the

windscreen. The windscreen heating may be

switched on automatically at low outside temper-

The intensity of the seat ventilation can be adjus-

ted in several levels. Press  once to activate the

highest level. Press  repeatedly to lower the in-

tensity by one level each time. When the button

is not lit, the seat ventilation is switched off.



102

Heating and cooling

 Child lock

Applies to: vehicles with rear control console

– Applies to vehicles with seat heating: An al-

ternating magnetic field is generated when

the seat heating is switched on. Side effects

such as irritation to sensory organs or func-

tional issues with active implants (e.g. pace-

makers, infusion pumps, neurostimulators)

are very unlikely. If you have implants,

please consult a doctor if you have any ques-

tions.

When  is lit on the rear control console, the

child lock is active and operation is disabled

ðpage 53.

 Ioniser

Applies to: vehicles with ioniser

The ioniser can make the air inside the vehicle

feel fresher. Both side vents must be open.

– Applies to vehicles with seat heating: Ex-

plain to your passengers how to use the seat

heating safely.

 Perfume

Applies to: vehicles with perfume function

The perfume function creates a pleasant aroma

inside the vehicle by diffusing a fragrance via the

vents on either side of the dashboard. The fra-

grance may not be diffused right away, particu-

larly at very low or very high temperatures. The

settings for the perfume feature can be adjusted

ðpage 104.

CAUTION

Applies to: vehicles with seat heating

– To avoid damaging the heating elements of

the seat heating, please do not kneel on the

seat or apply sharp pressure at a single

point.

– Only use the seat heating when the seat is

dry.

Residual heat

– Only place dry objects on the seats.

– Do not spill any liquid on the seats.

– Covering the seats can impair the seat heat-

ing function. Do not use seat covers and do

not place any objects (e.g. jackets, blankets

or bags) on the seats when the seat heating

is switched on.

The residual heat in the engine coolant is used to

heat the interior. To use this function, press the

 button for longer than two seconds with the

ignition switched off. The function will be switch-

ed off after about 15 minutes.

WARNING

– Explain to your passengers how to use the

seat heating safely.

– You should not leave the air recirculation

switched on for too long. The windows can

mist over as a result – risk of accident!

For the sake of the environment

– If the air recirculation or automatic air recir-

culation function is used for a long period,

Switching off A/C cooling mode saves energy.

the concentration of CO can build up inside

the vehicle. This can cause personal discom-

fort and may even lead to an accident!

Note

Applies to: vehicles with perfume function:

Use the perfume function in moderation; be

considerate of the well-being of passengers

and pets travelling with you. The combination

with other fragrances or smells can cause pas-

sengers to feel unwell. Reduce the intensity

of the perfume or switch the function off if

anyone in the vehicle feels unwell. Use only

fragrances approved for use by Audi.

Switch off the air recirculation / automatic

air recirculation immediately and ventilate

the vehicle if you experience any discomfort.

– Applies to vehicles with seat heating: The

vehicle has functions which activate the seat

heating automatically. People with limited

capacity to feel pain or sense temperature

must make sure that the seat heating is

switched off at the start of the journey to

ensure that they do not burn themselves.

103

Heating and cooling

the fossil fuel powered supplementary heater

is in operation. This is no cause for concern.

Adjusting the vents

You can open and close the vents using the

thumbwheels. The lever in the centre of the vents

can be used to adjust the direction of air flow.

Air quality display

Applies to: vehicles with air quality display

Further settings

Further settings can be adjusted.

►

Applies to MMI: On the home screen, select

CAR > A/C > .

Perfume

Applies to: vehicles with perfume function

Fig. 88 Upper display: Air quality display

You can select the perfume and check its fill level

via Perfume selection.

You can have air quality information displayed.

►

Applies to MMI: On the home screen, select

You can adjust the strength of the fragrance by

selecting Perfume intensity.

CAR > A/C > Air quality.

Enhanced air filter with activated carbon

Applies to vehicles without particulate sensor

Footwell temperature

Applies to: vehicles with footwell heating

The effectiveness of the filter is displayed as a

graphic. The graphic illustrates the number of

polluting particles inside the vehicle compared to

the surrounding area.

You can adjust the temperature for the front

seats.

Automatic supplementary heater

Applies to: vehicles with supplementary heater

Particulate display

Applies to: vehicles with particulate sensor

The vehicle interior warms up more quickly with

the supplementary heater. The supplementary

heater is regulated automatically when this func-

tion is switched on.

A sensor determines the particulate level

(PM2.5) outside and inside the vehicle. The val-

ues measured are displayed as an air quality in-

dex (AQI) on a colour scale 1 . A value in the

green area indicates very high air quality.

WARNING

Applies to: vehicles with supplementary heater

The values shown by the system are approxima-

tions which may deviate from the real conditions.

Under certain circumstances, the system may not

be fully available or may not display any values

for a limited period, or the measurements may

be implausible.

When the fossil fuel powered supplementary

heater is in operation, hot exhaust gases are

emitted from the exhaust outlet under the

car.

For the sake of the environment

Applies to: vehicles with supplementary heater

– In extreme weather conditions

– When the vehicle is stationary

– In a car wash

Switching off the automatic supplementary

heater saves energy.

– If someone is smoking or dust is stirred up in-

side the vehicle

Note

Applies to: vehicles with supplementary heater

– If fresh air is circulated to avoid the windows

misting up



At low outside temperatures, water vapour

may form in the engine compartment when

104

Heating and cooling -> Air conditioner for Your Audi Rs Q8 SUV First Generation (2020-2026)

Related Topics

Heating and cooling

Popular Owner Manuals

Latest Owner Manuals