TV -> Interference for Your Audi Rs Q8 SUV First Generation (2020-2026)

TV  
Select: Change PIN > a new PIN for the child  
lock > OK.  
Re-enter and press OK.  
a PIN for approximately one minute. The PIN  
can only be reset by an Audi workshop.  
Whether a digital signal for the child lock  
activation can be received depends on the  
broadcasting organisations.  
Note  
If you enter the wrong child lock PIN three  
times in a row, you will not be able to enter  
Interference  
Applies to: vehicles with TV  
Subject  
Remedy  
Channel list is incomplete or not  
displayed.  
No reception at your current location. Wait briefly or move your  
vehicle to a different location.  
Freeze frame, muted sound, hour- Periods of interference in a digital channel. Move your vehicle to a  
glass display, symbol.  
Temperature too high/low.  
Limited or no TV reception.  
different location.  
The thermal cut-out of the television receiver has switched the  
picture and sound off temporarily.  
Change the region code of the TV tuner.  
Preparing the CI+ module for use  
Receiving encrypted TV  
channels  
Switch the MMI on.  
Ensure that you have stable TV reception.  
Applies to MMI: On the home screen, select ME-  
DIA > Source > TV > an encrypted TV channel.  
CI+ module  
Applies to: vehicles with CI+ slot  
Depending on the country and the provider, the  
CI+ module may need to be activated.  
Follow the instructions given by the provider of  
the CI+ module.  
Applies to MMI: If the provider requires an ID  
for activation, select the following on the home  
screen: MEDIA > Source > TV > > CAS sys-  
tem notification.  
For further information on activation, please con-  
tact the provider of the CI+ module.  
Fig. 191 CI+ slot: CI+ module inserted  
You will require a CI+ module for DVB-T2 to re-  
ceive encrypted DVB-T2 channels 6 ðpage 297,  
Fig. 187. The CI+ module is available from spe-  
cialist retailers.  
Changing the CI+ module  
If you possess additional CI+ modules for trips  
abroad, you can change the modules in the vehi-  
cle.  
Inserting the CI+ module  
Remove the CI+ module from the CI+ slot  
The CI+ slot is located in the luggage compart-  
ment behind a cover in the right side trim.  
ðpage 302.  
Follow the instructions ðpage 301, Preparing  
the CI+ module for use.  
Open the cover and insert the CI+ module in the  
slot.  
301