2025-2026 Audi S Q5 SUV Driver assistance -> Cruise control system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver assistance -> Cruise control system for Your Audi S Q5 SUV Third Generation (2025-2026)

Driving information  
The saved lap timer values will remain after  
turning off the ignition.  
Tips  
You can retrieve information from the trip  
computer while the lap timer stopwatch is  
running.  
Lap statistics  
Applies to: vehicles with lap timer  
Displaying lap statistics  
Lap times and timing  
Applies to: vehicles with lap timer  
You can display the number of laps driven , the  
fastest lap +, the slowest lap , and the average  
time in the instrument cluster.  
Requirement: the lap timer must be open.  
Timing laps  
Select in the instrument cluster: Vehicle func-  
To start timing manually, select Start lap 1 in  
tions tab > button > Lap statistics.  
the menu.  
Turn the thumbwheel down or up to display the  
To start timing automatically as soon as you be-  
individual lap times.  
gin to drive, select Start lap 1 by driving off or  
Start by driving off in the menu.  
To return to the lap timing that was started, se-  
lect the button > Lap times.  
To start timing a new lap after driving a lap, se-  
Resetting lap statistics  
lect New lap in the menu. This starts timing  
the next lap at the same time.  
Requirement: the lap statistics menu must be  
displayed.  
After completing a lap, the difference between  
the last lap and the previous best lap time will be  
indicated with a or +.  
To reset the lap statistics, press and hold the  
left thumbwheel until the message No lap  
times have been recorded yet. appears.  
Pausing timing and displaying a split time  
To take a break , select Pause in the menu.  
To resume timing, select Resume in the menu.  
Tips  
The lap statistics list the lap times for the last  
30 laps. The fastest and slowest lap times out  
of up to 99 measured laps are also displayed.  
To display a split time, select Split time in the  
menu. The split time appears for approxi-  
mately ten seconds in the instrument cluster.  
The current lap timing will continue running.  
Integrated Toll Module  
Canceling lap timing  
Description  
Applies to: vehicles with Integrated Toll Module  
The timing of the current lap will stop. The lap  
time will be erased and will not be included in the  
statistics.  
Depending on the region, you can pay toll fees in  
certain countries using the Integrated Toll Mod-  
ule (ITM). It replaces a separate transponder for  
detecting toll fees. The system electronics are in-  
tegrated in the rearview mirror housing.  
Select Cancel lap in the menu.  
Resetting the time  
Select Reset lap times in the menu.  
To use the ITM in toll zones, you must register  
and activate it.  
Tips  
A maximum of 99 lap times can be meas-  
ured.  
Registration  
Applies to: MMI: Select on the home screen:  
If timing is paused, you can continue it later  
even if you turn off the ignition.  
Saved lap times cannot be individually de-  
leted from the total results.  
VEHICLE > Settings & Service > Integrated Toll  
Module.  
Note the Integrated Toll Module ID.  
149  
Driving information  
To register the ITM, go to the displayed web ad-  
dress and follow the instructions.  
Activation  
To activate the ITM, press in the MMI.  
Entering the number of passengers  
A lower toll fee may be charged depending on the  
number of passengers and the region. You must  
either enter the number of passengers or deacti-  
vate the ITM based on the laws applicable in the  
area where you are driving.  
To enter the number of passengers, select the  
appropriate button in the MMI.  
To deactivate the ITM, press in the MMI.  
Tips  
The driver is responsible for specifying the  
correct number of passengers and activat-  
ing or deactivating the ITM.  
Malfunctions can occur when detecting tolls  
if both the ITM and transponder are activat-  
ed. Deactivate the system not being used or  
remove it as necessary.  
If the rearview mirror is replaced, you must  
register the new ITM and remove the old  
ITM from the account.  
The system complies with United States FCC  
regulations and ISED regulations  
ðpage 322.  
Display  
Applies to: vehicles with Integrated Toll Module  
The selected number of passengers is displayed  
in the MMI status bar ðpage 24.  
The symbol in the status bar and a notifica-  
tion in the MMI will indicate if there is a faulty  
connection between the ITM and the MMI or if  
the ITM is faulty. If the connection remains inter-  
rupted or the ITM is faulty, drive immediately to  
an authorized Audi dealer or authorized Audi  
Service Facility.  
150  

Related Topics

Popular Owner Manuals