2025-2026 Audi S Q5 SUV Driving -> Brakes User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Brakes for Your Audi S Q5 SUV Third Generation (2025-2026)

Driving  
Have maintenance performed regularly on the  
vehicle.  
Statistics  
Applies to: vehicles with plug-in hybrid drive  
Do not let the engine run while the vehicle  
parked.  
You can display statistics about the trips traveled  
using electric power and those using fuel. The  
values are taken from the short-term memory  
and long-term memory of the trip computer.  
Do not drive with winter tires during the summ-  
er.  
Use the Start/Stop system.  
Select on the home screen: VEHICLE > Vehicle  
data.  
If necessary, scroll to the e-tron short-term  
statistics or e-tron long-term statistics.  
Utilize the engine braking effect.  
Avoid driving short distances when possible.  
Plug-in hybrid drive: If you must brake the vehi-  
cle and coasting is not possible, then switch  
quickly from the accelerator pedal to the brake  
pedal and press the brake with steady pressure.  
This allows the best possible use of recupera-  
tion.  
Vehicle sound  
Applies to: vehicles with plug-in hybrid drive  
The electric drive system generates considerably  
less noise than a combustion engine. An artificial  
vehicle sound is generated during electric driving  
so that the vehicle can be heard from the outside.  
At high speeds, the vehicle sound will fade out.  
Tips  
The amount of noise produced by the vehicle  
can increase significantly when driving with a  
sporty style. Show respect to others around  
you and the environment with the way you op-  
erate your vehicle, especially at night.  
WARNING  
Other road users may not be able to clearly  
hear electric vehicles when they are driving.  
This increases the risk of an accident, particu-  
larly when driving in areas with little traffic,  
when maneuvering, or when driving in re-  
verse.  
Energy management  
Your vehicle is equipped with an intelligent ener-  
gy management system for distributing electrici-  
ty. This significantly improves the starting ability  
and increases the vehicle battery life.  
Efficient and environmentally-friendly  
driving  
Tips  
If you drive short distances frequently, the  
vehicle battery may not charge enough  
while driving. As a result, convenience func-  
tions for electrical equipment may be tem-  
porarily unavailable.  
Your driving style greatly influences the amount  
of fuel and energy consumed, the environmental  
impact, and the wear on the engine, brakes, and  
tires. Note the following information for efficient  
and environmentally-conscious driving:  
The vehicle battery will gradually drain if  
the vehicle is not driven for long periods of  
time, or if electrical equipment is used  
when the engine is not running. To ensure  
that the vehicle can still be started, the  
electrical equipment will be limited or  
turned off.  
Turn off electrical equipment that is not need-  
ed, for example seat heating*.  
Anticipate upcoming traffic situations while  
driving to avoid unnecessary acceleration and  
braking.  
Avoid driving at high speeds.  
Avoid adding extra weight to the vehicle if pos-  
sible, for example by not leaving roof racks or  
bike racks installed when they are not needed.  
Make sure the tire pressure is correct.  
Messages  
The following messages may appear, depending  
on the vehicle equipment:  
107  
Driving  
Drive system: malfunction! Safely stop vehi-  
The ignition and important assist systems such  
as the brake booster will remain available during  
the Stop phase. The engine will restart automati-  
cally when needed.  
cle  
There is a malfunction in the drive system. The  
brake booster and the power steering may stop  
working. Stop the vehicle immediately or as soon  
as possible and do not continue driving. Secure  
the vehicle against rolling before exiting the vehi-  
cle ðpage 98. Have the problem corrected by an  
authorized Audi dealer or authorized Audi Service  
Facility.  
The Start/Stop system is automatically activated  
once the ignition is turned on.  
Turning the Start/Stop system off or on  
The button is located in front of the trans-  
mission selector in the center console. The but-  
ton will be illuminated when the function is  
turned off.  
Drive system: malfunction! Please contact  
Service  
Press to turn on or off.  
There is a malfunction in the drive system. The  
driving power is limited. Drive slowly to an au-  
thorized Audi dealer or authorized Audi Service  
Facility to have the malfunction corrected.  
If you turn off the system during a Stop phase,  
the engine will start again automatically.  
Basic requirements  
Vehicle sound: malfunction! Pedestrians  
The driver’s door and the hood must be closed  
and the driver’s safety belt must be fastened.  
The "P", "N", or "D" position must be engaged.  
The steering wheel must not be turned far in ei-  
ther direction.  
cannot hear vehicle. Please contact Service  
There is a malfunction in the vehicle sound func-  
tion. Drive extremely carefully, since other road  
users may not be able to hear your electric vehi-  
cle. Drive to an authorized Audi dealer or author-  
ized Audi Service Facility immediately to have the  
malfunction corrected.  
The vehicle must have driven faster than 2 mph  
(3 km/h) since the last time it stopped.  
The vehicle is not in trailer mode.  
Other indicator lights  
Note  
If turns on, vehicle performance is limited, for  
example because the combustion engine may not  
be available. Also note the additional instructions  
in the instrument cluster.  
Always turn off the Start/Stop system when  
driving through water ðpage 108.  
Tips  
Depending on the driving situation, the en-  
gine may already stop when coasting before  
the vehicle has come to a complete stop.  
If you select the "D" position after shifting  
into reverse, the vehicle must be driven fast-  
er than 6 mph (10 km/h) in order for the  
Start/Stop system to become active again.  
This makes it possible to maneuver without  
stopping the engine.  
Start/Stop system  
Description  
Applies to: vehicles with Start/Stop system  
The Start/Stop system can help increase fuel  
economy and reduce CO emissions. In Start/  
2
Stop mode, the engine shuts off automatically  
when stopped, for example at a traffic light.  
If certain conditions are met, the engine may  
stop before the vehicle has come to a complete  
stop. If you release the brake pedal or press the  
accelerator pedal when this happens, the engine  
will start and driving power will be transmitted.  
Stopping and starting the engine  
Applies to: vehicles with Start/Stop system  
Press and hold the brake pedal until the vehicle  
has stopped. The indicator light appears in  
108  
Driving  
the instrument cluster once the engine stops  
automatically.  
Depending on the engine, the . indicator light  
may appear if the engine is not stopped.  
The engine starts again when you remove your  
foot from the brake pedal. The indicator light  
turns off.  
Messages  
Applies to: vehicles with Start/Stop system  
If the parking brake is set, the engine will only  
start again when the accelerator pedal is press-  
ed.  
The following messages may appear, depending  
on the vehicle equipment:  
Drive system: please start the vehicle manually  
Tips  
This message appears when specific conditions  
are not met during a Stop phase. The Start/Stop  
system will not be able to restart the engine. The  
engine must be started with the  
Press the brake pedal during a Stop phase  
to keep the vehicle from rolling.  
The ignition will turn off if you press the  
START ENGINE STOP  
START ENGINE STOP  
button.  
button during a Stop  
phase.  
Vehicle starting system: malfunction! Please  
contact Service  
If you leave the vehicle briefly during a Stop  
phase and then enter again, the driver's  
door must be closed and the safety belt  
must be fastened in order for the engine to  
be able to restart.  
There is a malfunction in the Start/Stop system.  
Drive the vehicle to an authorized Audi dealer or  
authorized Service Facility as soon as possible to  
have the malfunction corrected.  
You can control if the engine will stop or not  
by reducing or increasing the amount of  
force you use to press the brake pedal. For  
example, if you only lightly press on the  
brake pedal in stop-and-go traffic or when  
turning, the engine will not turn off when  
the vehicle is stationary. If you press the  
brake pedal harder, the engine will turn off.  
Brakes  
General information  
You can apply the vehicle's brakes using the brake  
pedal.  
Operating noise  
Noises may occur when braking depending on the  
speed, braking force, and outside conditions such  
as temperature and humidity.  
Starting and stopping the engine automat-  
ically  
Applies to: vehicles with Start/Stop system  
The system checks if certain conditions are met  
before and during the Stop phase, and deter-  
mines if the engine stops and how long it re-  
mains stopped. For example, if power usage is  
high, the engine will not be stopped. Along with  
other conditions, the following factors influence  
the automatic engine start or stop:  
Braking effect  
To ensure an optimal braking effect, the brake  
pads will be applied to the brake rotors for a  
short period of time when driving at high speeds  
while the windshield wipers are turned on.  
If the brake system becomes damp, for example  
after driving in heavy rain, the braking effect may  
be delayed. Other factors that could temporarily  
increase the response time of the brakes include:  
Environmental conditions (slopes, inclines, ele-  
vation, temperature)  
Battery (charge status, temperature, power us-  
age)  
Wet conditions  
Low temperatures, ice, and snow  
Roads covered in salt  
Dirty brake pads  
Engine temperature  
Assist systems  
Driving behavior  
109  

Related Topics

Popular Owner Manuals