2025-2026 Audi S Q5 SUV Driving -> Special driving situations User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Special driving situations for Your Audi S Q5 SUV Third Generation (2025-2026)

Driving  
the brake booster is not working, you have to use  
much more force when braking the vehicle.  
Do not continue driving. See an authorized  
Audi dealer or authorized Audi Service Facility  
for assistance.  
Do not continue driving. See an authorized Audi  
dealer or authorized Audi Service Facility for as-  
sistance. Read and follow the other safety pre-  
Electromechanical  
parking brake  
cautions ð  
.
 / Brake pads: wear limit reached. You  
can continue driving. Please contact Service  
Operating the parking brake  
The electromechanical parking brake is used to  
secure the vehicle from rolling unintentionally.  
The brake pads are worn. Drive to an authorized  
Audi dealer or authorized Audi Service Facility as  
soon as possible to have the malfunction correct-  
ed.  
The switch is located below the transmission  
selector in the center console. It turns on when  
the parking brake is set. You can release the park-  
ing brake manually or automatically when you  
start to drive.  
Brake booster: limited functionality. You can  
continue driving. Please contact Service  
There is a brake booster malfunction. The brake  
booster is available, but its effectiveness is re-  
duced. The braking performance may be different  
compared to the usual performance. Drive to an  
authorized Audi dealer or authorized Audi Service  
Facility immediately to have the malfunction cor-  
rected.  
Setting and releasing the parking brake  
Setting: pull the switch.  
If  / appears, the parking brake is hold-  
ing the vehicle. You can remove your foot from  
the brake pedal.  
Releasing: when the ignition is turned on, press  
and hold the brake pedal and press the but-  
ton.  
Brake booster: deactivated. See owner's manual  
The brake booster remains active for a brief peri-  
od of time after turning off the ignition. Secure  
the vehicle against rolling ðpage 98.  
If the red indicator light flashes, the braking  
force has not built up enough or it has decreased.  
You can also secure the vehicle by selecting the  
“P” position or pressing the brake pedal. Make  
sure the indicator light is off before you start  
driving.  
Other indicator lights  
When you turn on the ignition, the  / in-  
dicator light turns on briefly to check the func-  
tion. If the indicator light does not turn on, there  
is a system malfunction.  
Automatically releasing the parking brake  
when starting to drive  
If  / stays on, there is a malfunction in  
the brake system.  
Requirement: the driver's door must be closed  
and the driver safety belt must be fastened.  
– A high load was placed on the brakes from  
driving downhill for a long period of time. Follow  
the instructions in the message to utilize the en-  
gine braking effect and to relieve the brakes.  
Press the accelerator pedal to start to drive.  
WARNING  
To reduce the risk of an accident, always  
make sure the vehicle is situated safely  
while stationary.  
WARNING  
If a malfunction occurs in the ABS, ESC, and  
braking distribution, interventions that stabi-  
lize the vehicle will no longer be available.  
This could cause the vehicle to swerve, which  
increases the risk that the vehicle will slide.  
If the parking brake is set, it can release au-  
tomatically when the accelerator pedal is  
pressed. To reduce the risk of an accident,  
do not inadvertently press the accelerator  
111  
Driving  
pedal and always shift into the “P” position  
when the vehicle is stopped.  
to swerve, which increases the risk of an acci-  
dent.  
If the power supply fails, you cannot set the  
parking brake once it is released, or release  
it if it is set. Secure the vehicle against roll-  
ing before exiting the vehicle ðpage 98.  
See an authorized Audi dealer or authorized  
Audi Service Facility for assistance.  
Messages  
The following messages may appear, depending  
on the vehicle equipment:  
 / Parking brake: malfunction! Safely  
stop vehicle. See owner's manual  
Tips  
 / Parking brake: malfunction! Please  
release parking brake  
On steep inclines, especially when in trailer  
mode, the vehicle may roll backwards unin-  
tentionally when starting to drive. To reduce  
the risk of this happening, pull and hold the  
switch while pressing the accelerator  
pedal. If enough drive power has built up at  
the wheels and the vehicle does not roll  
backwards, then release the switch to start  
to drive.  
If one of these messages appears, there is a mal-  
function in the parking brake. If the message ap-  
pears while stationary, check if the parking brake  
is released and can be reset. If this is the case,  
turn the ignition off and back on.  
If the message stays on, if the parking brake can-  
not be released, or if the message appears while  
driving, do not continue driving. Secure the vehi-  
cle against rolling before exiting the vehicle  
ðpage 98. See an authorized Audi dealer or au-  
thorized Audi Service Facility for assistance.  
If you leave the vehicle when the “D” or “R”  
position is engaged, the parking brake will  
be set automatically.  
Noises when the parking brake is set and re-  
leased are normal and are not a cause for  
concern.  
Parking brake: malfunction! Please contact  
Service  
The parking brake goes through a self-test  
cycle at regular intervals when the vehicle is  
stopped. Any noises associated with this are  
normal.  
There is a malfunction in the parking brake. Drive  
to an authorized Audi dealer or authorized Audi  
Service Facility immediately to have the malfunc-  
tion corrected. Do not park the vehicle on inclines  
and secure it against rolling before exiting the  
vehicle ðpage 98.  
Emergency braking function  
Emergency braking should only be used in an  
emergency, if the standard brake pedal is mal-  
functioning or obstructed. When the emergency  
braking function is activated, the braking effect is  
similar to a heavy braking maneuver.  
/ Parking brake: warning! Vehicle posi-  
tion too steep  
The braking force may not be enough to secure  
the vehicle from rolling away. Park the vehicle in  
a place with less of an incline.  
Pull and hold the switch while driving.  
An audio warning signal will sound and emer-  
gency braking will begin.  
/ Parking brake: applied  
The parking brake is set. Press and hold the brake  
pedal to release the parking brake.  
If you press the accelerator pedal, emergency  
braking will be canceled.  
Take over!  
WARNING  
The vehicle cannot be held in place automatically.  
Press the brake pedal to secure the vehicle from  
rolling unintentionally.  
Heavy braking while driving through curves or  
in poor road or weather conditions can cause  
the vehicle to slide or the rear of the vehicle  
112  
Driving  
The steering wheel angle, the elevation, the com-  
pass direction, and the geo-coordinates of the  
current vehicle position are displayed in addition  
to the current vehicle angle. You will also receive  
information about the maximum sideways and  
lengthwise angle that was reached in the current  
driving cycle. These values are reset when the ig-  
nition is turned off.  
Special driving situations  
Driving uphill and downhill  
When driving uphill, downhill, or at high alti-  
tudes, note the following information:  
Drive slowly and carefully.  
Do not try to turn around if you cannot safely  
drive on an incline or hill. Instead, drive in re-  
verse.  
Note that the accuracy of the display depends on  
the driving situation.  
When driving down hills, you can activate the  
hill descent control if you press the brake pedal  
while driving in the “D” position. The automatic  
transmission will select a gear suitable for driv-  
ing down the hill and will attempt to maintain  
the speed at which the vehicle was traveling at  
the time the brake pedal was pressed. Press the  
brake pedal if necessary. The hill descent con-  
trol will turn off once the hill levels out or you  
press the accelerator pedal.  
WARNING  
Only drive on inclines that your vehicle is de-  
signed to handle. Do not exceed the hill  
climbing ability of your vehicle. Your vehicle  
could tip or slide.  
Do not drive at an angle on steep inclines  
and hills. If your vehicle is about to tip, you  
must immediately start steering in the di-  
rection of the downward slope to reduce the  
risk of an accident.  
Utilize the engine braking effect when driving  
downhill by selecting the “S” driving program  
ðpage 100. This especially applies when tow-  
ing a trailer. This reduces the load on the  
brakes.  
Always be ready to brake when using the hill  
descent control function.  
Applies to: vehicles with an inclinometer: Do  
not rely only on the inclinometer when as-  
sessing the driving situation.  
Applies to: plug-in hybrid drive: In high temper-  
atures, make sure the high-voltage battery is  
charged to at least 1/4 if towing a trailer while  
driving on long stretches of roads with hills.  
This relieves some of the load on the cooling  
system.  
Offroad driving  
Your vehicle is not an offroad vehicle. Note the  
following points when driving offroad:  
Apply the brakes in intervals and do not press  
the brake pedal continuously.  
Drive slowly and carefully.  
Use the hill descent assist ðpage 114.  
To reduce the risk of underbody damage, pay  
attention to the vehicle's ground clearance and  
drive across raised areas of the ground using  
the wheels on only one side of the vehicle, in-  
stead of allowing the center of the vehicle to  
pass over the raised areas.  
Inclinometer  
Applies to: vehicles with a tilt angle display  
You can display the vehicle's sideways angle and  
lengthwise angle in relation to the horizon.  
To reduce the risk of becoming stuck, drive  
through sandy or swampy areas at a steady  
speed and without stopping, if possible.  
Applies to: MMI: Select on the home screen:  
VEHICLE > Vehicle data.  
You may need to scroll down to the Inclinome-  
ter display.  
If necessary, use the following functions:  
The sideways angle of your vehicle should not ex-  
ceed the yellow range in the gauge. If it reaches  
the red range, there is a risk that the vehicle  
might tip.  
Audi drive select* offroad mode ðpage 116  
Hill descent assist* ðpage 114  
Limit ESC ðpage 121  
113  

Related Topics

Popular Owner Manuals