2025-2026 Audi S Q5 SUV Sitting correctly and safely -> Airbag system(airbag warning light) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Sitting correctly and safely -> Airbag system(airbag warning light) for Your Audi S Q5 SUV Third Generation (2025-2026)

Sitting correctly and safely  
Correct safety belt positioning  
WARNING  
Incorrect safety belt positioning can cause se-  
rious injury in the event of an accident or dur-  
ing sudden braking or driving maneuvers.  
Never drive with the backrest reclined ex-  
tremely far. The more the backrest is tilted  
back, the greater the risk of injury due to the  
safety belt being routed incorrectly.  
The safety belt itself or a loose safety belt  
can cause serious injuries if it shifts onto  
soft areas of the body, such as the stomach.  
The shoulder portion of the safety belt must  
lie over the center of the shoulder and  
chest, and never under the arm, behind the  
back, or across the neck or face.  
Fig. 67 Lap/shoulder belt positioning  
The lap portion of the safety belt must lie  
across the lap and never over the stomach.  
The safety belt must lie flat and securely on  
the upper part of the body and the lap.  
The belt webbing must not be pinched or  
twisted, or rub against sharp edges.  
Fig. 68 Safety belt positioning for pregnant women  
If the safety belt height is set incorrectly  
and/or the safety belt is routed incorrectly,  
then the safety belt's protective function  
will be impaired in the event of an accident.  
Make sure the safety belt is at the right  
height and is routed correctly for the person  
in the vehicle who is using it.  
Fastened safety belts offer optimal protection  
during an accident and reduce the risk of serious  
injury or death only when they are positioned cor-  
rectly. Furthermore, the correct safety belt posi-  
tion holds the vehicle occupant in place so that a  
deployed airbag can provide maximum protec-  
tion. Therefore, always fasten the safety belt and  
make sure it is positioned correctly ðfig. 67.  
A safety belt that is too loose may result in  
injuries during an accident, because your  
body will move farther forward due to kinet-  
ic energy and will be stopped abruptly by  
the belt.  
To ensure the safety belt is positioned correctly,  
make sure of the following points:  
Bulky, loose clothing (such as a coat over a  
sports jacket) may prevent the seat and  
safety belts from functioning correctly.  
Do not position the safety belt over hard or  
breakable objects (such as glasses, pens,  
etc.).  
The lap portion of the safety belt must be locat-  
ed across the lap.  
The shoulder portion of the safety belt must  
rest over the center of the shoulder.  
The safety belt must always rest flat and se-  
curely on the body.  
The lap belt portion of the safety belt must  
sit as low as possible on the lap of pregnant  
women and lie flat under the belly.  
For pregnant women, the safety belt must rest  
evenly across the chest and as low and flat as  
possible on the lap, so that no pressure is applied  
to the lower abdomen. This should be done  
throughout the entire pregnancy ðfig. 68.  
Note  
Make sure that there are no hook-and-loop  
fasteners or sharp objects such as zippers or  
rivets on clothing in the area where the safety  
70  
Sitting correctly and safely  
belt is worn. Otherwise, the safety belt could  
be damaged.  
fastened while driving. There may be additional  
audio warning signals.  
Fastening and unfastening safety belts  
Adjusting the height of the safety belt  
Fig. 69 Belt buckle and belt latch  
Fig. 71 Belt height adjustment for the front seats - safety  
belt relay  
To move the belt higher, slide the safety belt re-  
lay 2 upward.  
To move the belt lower, press the release but-  
ton 1 and slide the safety belt relay 2 down-  
ward.  
To check if the safety belt relay is securely  
locked in place, pull firmly on the belt.  
Fig. 70 Releasing the belt buckle from the belt latch  
Tips  
You can also adjust the height of the front  
seats to change the position of the safety  
belts.  
Observe the safety precautions ðpage 69.  
Fastening the safety belt  
Pull the safety belt by the belt buckle evenly  
Additional safety belt functions  
Belt retractor lock  
across your chest and lap.  
Insert the belt buckle in the belt latch belong-  
ing to the seat until it audibly engages  
The safety belts on the rear seats and on the  
front passenger seat are equipped with a belt re-  
tractor lock.  
ðfig. 69.  
Pull on the belt to make sure that the belt is se-  
curely locked in the latch.  
If you secure a child safety seat with a safety  
Unfastening the safety belt  
belt, the belt retractor lock on the safety belt  
may need to be activated. Follow the instruc-  
tions from the child safety seat manufacturer.  
Press the red button on the belt latch ðfig. 70.  
The belt buckle will pop out.  
Guide the belt back by hand so that the safety  
When a person in the vehicle has fastened a  
belt can roll up more easily.  
safety belt, the belt retractor lock should not  
be activated. If the belt retractor lock has been  
activated unexpectedly, deactivate it.  
Safety belt monitoring system  
Deactivating or activating the belt retractor lock  
- If the indicator light turns on or flashes, a  
ðpage 80.  
front safety belt is not fastened or it has been un-  
71  
Sitting correctly and safely  
Safety belt retractor  
Depending on vehicle equipment, some settings  
such as the driver’s seat and exterior mirror posi-  
tion can be stored.  
The safety belts are equipped with an automatic  
belt retractor. This automatic retractor allows the  
safety belt to be pulled all the way out when the  
belt is pulled slowly. However, the automatic re-  
tractor locks during sudden braking maneuvers.  
It also locks the belts when accelerating, driving  
uphill, and driving around curves.  
Storing and recalling a seat profile  
Applies to: vehicles with memory function  
The memory function buttons are located in the  
door trim panel.  
Belt force limiter  
Storing a seat profile  
Safety belts with belt force limiters reduce the  
force placed on the body by the safety belts dur-  
ing a collision.  
SET  
Press the  
button. If the LED in the button  
turns on, a seat profile can be stored.  
Push one of the numbered memory buttons. A  
tone confirms that the settings were stored.  
Safety belt pretensioners  
Recalling a seat profile  
In certain driving situations, safety belts may be  
tightened with reversible belt tensioners when  
you start driving. If the safety belt is too loose, it  
will be tightened so that the belt will rest closer  
to the body.  
When the a door is open and the ignition is  
turned off, press the memory button once  
briefly. The seat will be fully adjusted to the  
settings in the seat profile.  
If the door is closed or the ignition is turned on,  
In some collisions, pyrotechnic belt tensioners  
may secure the safety belts so that they cannot  
loosen. This reduces forward movement of the  
persons in the vehicle.  
press and hold the memory button until the  
seat is fully adjusted to the settings in the seat  
profile.  
WARNING  
WARNING  
To reduce the risk of an accident, the seat  
setting can only be recalled when the vehicle  
is stationary.  
The pyrotechnic system can only provide pro-  
tection during one collision. If the pyrotechnic  
belt tensioners deploy, the pretensioning sys-  
tem must be replaced by an authorized Audi  
dealer or authorized Audi Service Facility.  
In an emergency, the recall process can be  
canceled by pressing the seat adjustment  
button on that seat.  
Tips  
Airbag system  
Smoke may be released when pyrotechnic belt  
tensioners deploy. This is not a sign of a vehi-  
cle fire.  
General information  
WARNING  
Memory function  
If you have not fastened your safety belt,  
you are in an incorrect seating position, or  
you are too close to the airbag system, the  
airbag system will not be able to protect  
you. This increases the risk of serious inju-  
ries or death. Make sure that each person in  
the vehicle has their safety belt fastened  
correctly and is sitting in a correct seating  
position ðpage 63. This is necessary  
General information  
Applies to: vehicles with memory function  
With the memory function, you can save and call  
up seat profiles using the memory buttons in the  
door trim panel.  
72  
Sitting correctly and safely  
regardless of whether the seat is equipped  
with an airbag or not.  
which increases the risk of serious injuries or  
death. Only have an authorized Audi dealer  
or authorized Audi Service Facility make re-  
pairs or modifications to a vehicle.  
Never place your feet on the instrument  
panel, out of the window, or on the seat sur-  
faces. To help ensure that the airbag system  
can deploy correctly, never bend forward or  
lean on the door or the side window. Other-  
wise, serious injuries or death can occur if  
the airbags deploy.  
The airbag system can only provide protec-  
tion during one collision. If there is another  
collision, the airbag system will not deploy  
again. If the airbag system has deployed,  
have it replaced immediately by an author-  
ized Audi dealer or authorized Audi Service  
Facility.  
People, animals, or objects between the ve-  
hicle occupants and the airbag system can  
interfere with the correct deployment of the  
airbag or can be propelled through the vehi-  
cle interior, increasing the risk of serious in-  
juries or death. Make sure that nothing is lo-  
cated between the vehicle occupants and  
the airbag system. Do not secure or trans-  
port any objects within the deployment zone  
of the airbag systems, especially on the  
steering wheel, on the instrument panel, on  
the doors, on the windows, or in the foot-  
well.  
Fine dust may appear if the airbags deploy.  
This is completely normal and does not indi-  
cate a fire in the vehicle. The fine dust can ir-  
ritate the skin and mucous membranes in  
the eyes and can cause difficulty breathing,  
particularly for individuals who have or have  
had asthma or other health issues that af-  
fect breathing. Exit the vehicle or open the  
windows or doors to get access to fresh air.  
Tips  
Never put stickers on the airbag system cov-  
ers or cover them with any objects.  
If you are transporting children in the vehicle,  
read the information and follow the safety  
precautions ðpage 77.  
Only lightweight clothing should be hung  
from the garment hooks in the vehicle. Do  
not use clothes hangers to hang clothing.  
The pockets of the clothing must not con-  
tain any heavy, breakable, or sharp-edged  
objects. This could impair the effectiveness  
of the side curtain airbags.  
Safety systems monitoring  
The indicator light in the instrument cluster  
monitors the safety systems such as the airbags  
(including the control modules, sensor, and wir-  
ing) and the belt tensioners. It turns on when you  
turn on the ignition and turns off after several  
seconds.  
You must not use seat or protective covers  
that are not specifically approved for use on  
Audi seats with side airbags. Since the side  
airbags deploy from the seat backrest, such  
covers could impair the protective function  
of the side airbags.  
If the indicator light does not turn on when the  
ignition is turned on, does not turn off after sev-  
eral seconds, or turns on or flashes while driving,  
there may be a malfunction in one of the safety  
systems. Drive to an authorized Audi dealer or  
authorized Audi Service Facility immediately to  
have the malfunction corrected.  
Damage to the original seat covers in the  
airbag deployment area must always be re-  
paired by an authorized Audi dealer or au-  
thorized Audi Service Facility.  
Airbag system components are installed at  
various locations in your vehicle. Incorrect  
work or repairs on the vehicle could damage  
the airbag system components or impair  
their functionality. This may prevent the air-  
bags from deploying or cause them to de-  
ploy incorrectly in the event of an accident,  
WARNING  
Have the malfunction in the safety systems in-  
spected immediately. Otherwise, there is a  
risk that the systems may not activate during  
73  
Sitting correctly and safely  
an accident, which increases the risk of seri-  
ous injury or death.  
Description  
Fig. 72 Airbag overview image (deployment area/deployed airbags)  
The locations of the airbags are labeled with  
“AIRBAG”. The following airbags are installed in  
your vehicle:  
The deployment range for the airbag system can-  
not be defined for every situation, since the cir-  
cumstances surrounding accidents can vary wide-  
ly. Factors that play an important role include the  
condition of the object that the vehicle hits (hard  
or soft), the angle of impact, vehicle speed, etc.  
The deciding factor for the deployment of the air-  
bag system is the deceleration that occurs during  
an accident. Sensors in the vehicle are designed  
to detect the severity of an accident in conjunc-  
tion with the control module, and to provide a  
targeted and timely deployment of the restraint  
system. If the vehicle deceleration that is meas-  
ured during an accident is below the specified  
reference values in the control module, then the  
airbags will not deploy, even though the vehicle  
may be severely damaged from the accident. In  
these cases, the vehicle occupants will be pro-  
tected by the safety belts if they are fastened and  
worn correctly.  
1
2
3
4
Driver's airbag  
Front passenger's airbag  
Front side airbags and rear, if applicable  
Head curtain airbag with ejection mitigation  
Airbags offer the best possible protection in your  
vehicle during an accident when they are used to-  
gether with safety belts that are fastened cor-  
rectly, and when vehicle occupants are sitting in a  
correct seating position. Airbags are a supple-  
mentary restraint system and do not replace  
safety belts.  
Airbags may deploy during front impact, side im-  
pact, or rollover accidents.  
74  
Sitting correctly and safely  
The deployment of the front passenger's airbag  
will depend on the occupancy of the seat  
ðpage 75.  
Standard (FMVSS) 208, as well as Canada Motor  
Vehicle Safety Standard (CMVSS) 208 as applica-  
ble at the time your vehicle was manufactured.  
According to these requirements, the front Ad-  
vanced Airbag System on the front passenger’s  
side has been certified for “suppression” for in-  
fants approximately 12 months old and younger,  
and for “low risk deployment” for children aged 3  
to 6 years old (as defined in the standard).  
Each deployed airbag is filled with gas. When this  
occurs, the airbag covers open and the airbags  
unfold with great force into the deployment zone  
within milliseconds. Inflated airbags reduce the  
movement of persons in the vehicle who are  
wearing safety belts in the direction of the im-  
pact and thus help to reduce the risk of injury.  
They can help to protect the head, upper body,  
and lap, for example. However, there is the possi-  
bility that airbag deployment can cause injuries.  
The advanced airbag system will activate or deac-  
tivate the front passenger's airbag based on the  
occupancy of the seat. If a front airbag deploys  
during a collision, the deployment force will  
adapt to the person in the vehicle.  
The airbag system works when the ignition is  
turned on.  
Components  
If you or other passengers in the vehicle have  
physical limitations that prevent sitting in a cor-  
rect position, modifications to the vehicle may be  
necessary. For more information, contact an au-  
thorized Audi dealer or authorized Audi Service  
Facility, or call Audi customer support at  
1-800-822-2834.  
The advanced airbag system consists of the fol-  
lowing components:  
Front airbags in the steering wheel and in the  
instrument panel on the front passenger's side:  
these can protect persons in the front seats  
during a collision  
Passenger occupant detection sensor in the  
front passenger's seat: this detects if the front  
passenger's seat is occupied (for example, by a  
person or a small child in a child safety seat)  
Seat position sensors on the front seats: these  
determine the distance between the seat and  
the steering wheel or instrument panel  
Sensors in the front safety belt latch: these de-  
tect if the safety belts are fastened  
Tips  
The side curtain airbags in your vehicle have  
ejection mitigation functions. This reduces  
the risk of being ejected from the vehicle inte-  
rior during an accident, especially in the event  
of a vehicle rollover.  
Advanced airbag system  
PASSENGER AIR BAG OFF ON indica-  
tor light in the headliner: this indicates if the  
front passenger's airbag is activated or deacti-  
vated  
Indicator light in the instrument cluster:  
this monitors the function of the Advanced Air-  
bag System components to ensure they are  
functioning correctly  
How the components function together  
The passenger occupant detection sensor in the  
front passenger's seat detects if the front pas-  
senger's seat is occupied. The passenger occu-  
pant detection sensor measures the electrical ca-  
pacity on the front passenger’s seat. The pas-  
senger's airbag is activated or deactivated  
Fig. 73 Headliner: indicator light to display the status of  
the front passenger's airbag  
The Advanced Airbag System in your vehicle has  
been certified to comply with the requirements  
of the United States Federal Motor Vehicle Safety  
75  

Related Topics

Popular Owner Manuals