On the road
QUICK REFERENCE
Adding engine oil
1. Opening the hood.
Wheels and tires
Tire pressure specifications
2. Open the lid counterclockwise.
The tire inflation pressure specifications can be
found in the tire inflation pressure table in the
printed Owner's Manual.
After correcting the tire pressure
If equipped with a Tire Pressure Monitor, the
corrected tire pressures are applied automati-
cally. Make sure that the correct tire settings
have been made. With tires that cannot be
found in the tire pressure values on the control
display, reset the Tire Pressure Monitor (TPM).
3. Add engine oil.
4. Close the lid.
If equipped with a flat tire monitor, reinitialize
the flat tire monitor.
Providing assistance
Checking the tire pressure
Regularly check the tire inflation pressure and
correct it as needed:
Hazard warning system
▷
▷
At least twice a month.
Before embarking on an extended trip.
Electronic oil measurement
Functional requirements
A current measured value is available after ap-
prox. 30 minutes of normal driving with the
combustion engine running.
Hazard warning system button
Displaying the engine oil level
1.
Apps menu
ConnectedDrive
2. "Vehicle"
3. "Vehicle status"
4. "Engine oil level"
The engine oil level is displayed.
BMW Assistance
Contact BMW Assistance for information and
support for all aspects of the vehicle.
1.
Apps menu
Adding engine oil
2. "All apps"
General information
3. "BMW Assist"
Safely park the vehicle and switch off drive-
ready state before adding engine oil.
4. Select the desired service.
28