2023-2025 BMW I5 4 Door Driving -> Start/Stop button User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> Start/Stop button for Your BMW I5 4 Door First Generation (2023-2025)

Driving  
CONTROLS  
Driving  
Overview  
Vehicle features and options  
This chapter describes model-specific equip-  
ment, systems, and functions that are currently  
available, or may become available in the fu-  
ture, even if they are not present in the vehicle.  
Additional information:  
Vehicle equipment, refer to page 8.  
Start/Stop button  
The Start/Stop button is located on the  
center console.  
Principle  
Pressing the Start/Stop button turns drive-  
ready state on/off.  
Acoustic pedestrian protection  
Depending on vehicle equipment and national-  
market version, Acoustic Pedestrian Protection  
generates a continuous driving noise in vehi-  
cles with electric or electrically assisted drives.  
General information  
Drive-ready state turns on when the brake  
pedal is pressed while pushing the Start/Stop  
button.  
▷
With a stationary vehicle and drive-ready  
state turned on, as soon as the selector  
lever position P is exited.  
Pressing the Start/Stop button again turns  
drive-ready state back off and turns standby  
state back on.  
▷
With electric driving up to approx.  
20 mph/30 km/h.  
Drive-ready state cannot be turned on as long  
as the charging cable is connected or the  
charging socket cover is open.  
A speaker system broadcasts the noise to the  
environment. As a result, other road users,  
for instance pedestrians or cyclists, can better  
perceive the vehicle.  
Additional information:  
▷
▷
▷
Drive-ready state, refer to page 46.  
Standby state, refer to page 46.  
Charging cable, refer to page 318.  
128  
Online Edition for Part no. 01405B37D97 - II/24  
Driving  
CONTROLS  
▷
The state of high-voltage battery charge is  
sufficient.  
Drive-ready state in detail  
Safety information  
Warning  
▷
▷
▷
The driver's door is closed.  
Charging cable is detached.  
The charging socket cover is closed.  
An unsecured vehicle can begin to move and  
possibly roll away. There is a risk of accident,  
injury, or property damage. Before leaving  
the vehicle, secure the vehicle against rolling  
away.  
Driving  
1. Depress the brake pedal.  
2. Turn on drive-ready state.  
3. Engage selector lever position D, B or R.  
4. Depress the accelerator pedal to drive.  
In order to ensure that the vehicle is secured  
against rolling away, follow the following:  
State of charge in strong temperature  
fluctuations  
▷
▷
Set the parking brake.  
On uphill grades or on downhill slopes,  
turn the front wheels in the direction of  
the curb.  
In the case of strong temperature fluctuations  
and a low state of charge of the high-voltage  
battery, it may not be possible to start the ve-  
hicle again at the beginning of the next trip.  
Recharge vehicle with a low state of charge in  
time.  
▷
On uphill grades or on downhill slopes,  
also secure the vehicle, for instance with  
a wheel chock.  
Turning on the drive-ready state  
1. Close the driver's door.  
Selector lever positions  
Display  
2. Depress the brake pedal.  
The engaged selector lever position is dis-  
played in the instrument cluster and on the  
selector lever.  
3. Press the Start/Stop button.  
A signal tone sounds. Drive-ready state is  
switched on.  
Gear position D  
Selector lever position for normal driving.  
Display in the instrument cluster  
The READY display indicates  
that the vehicle is ready for driv-  
ing.  
The vehicle drives off slowly when the brake  
pedal is released.  
R reverse gear  
Engage selector lever position R only when the  
vehicle is stationary.  
Driving off  
N Neutral  
Functional requirements  
The vehicle may be pushed or roll without  
drive, for instance in car washes, in selector  
lever position N.  
Driving is possible when the following prereq-  
uisites are met:  
129  
Online Edition for Part no. 01405B37D97 - II/24  

Related Topics

Popular Owner Manuals