Parking
CONTROLS
Turning the panoramic view on/off
Functional requirements
▷
A GPS signal must be received.
▷
Depending on national-market version: A
BMW ID or driver profile must be activated.
1.
Press the button.
2. "Panorama view"
▷
▷
The reversing camera and front camera
must be installed.
To exit panorama view, select another
camera view on the left toolbar.
The direction of travel, selector lever posi-
tion, and vehicle angle must correspond to
a stored activation point.
Display
Storing activation points
1. Drive your vehicle to the location where you
want the system to turn on, then stop.
2.
Press the button.
3. "Panorama view"
4. "Activation point"
Yellow lines on the screen display identify the
bumpers of your own vehicle.
The current position is displayed.
5. "Save activation point"
When reverse gear is engaged, the reversing
camera view is displayed. Depending on ve-
hicle equipment, the front camera view is dis-
played when forward gear is engaged.
Activation points are saved with the following
information, for example:
▷
▷
▷
With the city/town.
With the city/town and the street.
With the GPS coordinates.
Automatic activation of
panorama view
You can rename the location and street infor-
mation created automatically.
Using activation points
Principle
The use of activation points can be switched
on and off.
Positions at which panorama view should
switch on automatically can be saved as acti-
vation points.
1.
Apps menu
2. "Vehicle"
General information
Up to ten activation points can be stored.
3. "Driving settings"
4. "Driver Assistance"
5. "Parking"
The activation points can be used when driv-
ing forward and, depending on national-mar-
ket version, when reversing.
6. "GPS-based"
Follow instructions in the Parking assistance
systems chapter.
255
Online Edition for Part no. 01405B37D97 - II/24
English 