Driving comfort
CONTROLS
▷ Each time the rocker switch is pressed to the
point of resistance, the desired speed in‐
creases or decreases by approx.
1 mph/1 km/h.
Displays in the instrument cluster
Indicator light
Depending on how the vehicle is equip‐
ped, the indicator light in the instrument
cluster indicates whether the system is
switched on.
▷ Each time the rocker switch is pressed past
the point of resistance, the desired speed in‐
creases or decreases by a maximum of
5 mph/10 km/h.
The maximum speed that can be set de‐
pends on the vehicle.
Desired speed and stored speed
The desired speed is displayed next to
the symbol in the Info Display.
▷ Pressing the rocker switch to the resistance
point and holding it accelerates or deceler‐
ates the vehicle without requiring pressure on
the accelerator pedal.
▷ Display lights up green: system is ac‐
tive, the display indicates the desired
speed.
After the rocker switch is released, the vehi‐
cle maintains its final speed. Pressing the
switch beyond the resistance point causes
the vehicle to accelerate more rapidly.
▷ Display lights up orange: system is inter‐
rupted, the display indicates the stored
speed.
▷ No display: system is switched off.
Continuing cruise control
General information
Status display
Selected desired speed.
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, uninten‐
tional braking or accelerating may occur.
If no speed is indicated, it is possible that the
conditions necessary for operation are not cur‐
rently fulfilled.
In the following cases, the stored speed value is
deleted and cannot be called up again:
Displays in the Head-up Display
Some system information can also be displayed
in the Head-up Display.
▷ When the system is switched off.
▷ When drive-ready state is switched off.
System limits
Engine power
Calling up the stored speed
Press the button on the steering wheel.
The desired speed is also maintained downhill,
but may not be maintained on uphill grades if en‐
gine power is insufficient.
The stored speed is reached again and main‐
tained.
154
Online Edition for Part no. 01402914089 - X/19