Opening and closing
CONTROLS
center or another qualified service center or
repair shop.
Malfunction
Comfort Access
Concept
The vehicle can be accessed without operating
the vehicle key.
Carrying the vehicle key with you, e.g., in your
pants pocket, is sufficient.
When there is a power failure or to unlock the
door from the rear: first push down on the lever
in the door frame in the front area, arrow. The
lever is raised.
The vehicle automatically detects the vehicle key
when it is in close proximity or in the car's inte‐
rior.
General information
Comfort Access supports the following func‐
tions:
▷ Unlocking and locking the vehicle.
▷ Convenient closing.
Functional requirements
▷ To lock the vehicle, the vehicle key must be
outside of the vehicle near the doors.
Pull up the release on the underside of the lever,
arrow 1, then push the lever forwards, arrow 2.
▷ The next unlocking and locking cycle is not
possible until after approx. 2 seconds.
LED in the driver's door
Unlocking
The LED signals have the follow‐
ing meaning:
▷ 1x flashing: door is locked.
The LED then remains on for
a while, if the vehicle was
locked from the outside.
The LED then lights up per‐
manently, if the vehicle was
locked from the inside or auto‐
matically while driving off.
Before pressing the door opener button, draw
your hand across the sensor surface.
▷ Flash twice: door is unlocked.
This corresponds to pressing the button
the vehicle key.
on
▷ Flashing more than twice: a fault with the
door. In this case contact a dealer’s service
71
Online Edition for Part no. 01402914089 - X/19
English 
