ant
o not add coolant to the cooling
stem when the engine is hot. If
mpt to do so, escaping coolant
se burns.
ze and anti-corrosion agents
ardous to health. You should
store them in their closed origi-
ainers and in a location inac-
e to children. Antifreeze and
rosion agents are inflammable.
reason, do not spill them on hot
parts. They could ignite and
urns. Comply with the instruc-
the containers.<
Checking the coolant level and
adding coolant
Check the coolant level when the
engine is cold, approx. 687/+206.
omply with the applicable envi-
nmental laws regulating the dis-
antifreeze agents with corro-
ibitor.<
1. Open the cap for the expansion tank
by turning it slightly counterclock-
wise to allow accumulated pressure
to escape. Then open
2. The coolant level is correct when the
upper end of the red float is at least
even with the upper edge of the filler
neck – refer to the arrow in the illus-
tration. The end of the float may stick
out by a maximum of 3/4 in / 2 cm –
that is, up to the second mark on the
float. Refer also to the schematic dia-
gram next to the filler neck
English 
