2004-2010 BMW M5 4 Door Controls -> Opening and closing User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Controls -> Opening and closing for Your BMW M5 4 Door Fourth Generation (2004-2010)

Opening and closing  
Integrated key  
Keys/remote control  
Press the button 1 to unlock the key.  
1
2
3
Remote control with integrated key  
Spare key  
The integrated key fits the following locks:  
>
>
Glove compartment, refer to page 95  
Driver's door, refer to page 32  
Adapter for spare key, in glove compart-  
ment  
New remote controls  
Remote control with integrated key  
To obtain additional or replace lost keys, new  
remote controls with an integrated key are  
available at your BMW center.  
Each remote control contains a battery which is  
automatically charged in the ignition lock while  
driving. Drive a longer distance with each  
remote control at least twice a year to keep the  
battery charged. For comfort access*, the  
remote control contains a replaceable battery,  
refer to page 37.  
Spare key  
Store the spare key in a safe place such as your  
wallet. This key is not intended for regular use.  
The spare key and integrated key fit the same  
locks.  
Depending on which remote control is detected  
by the vehicle during unlocking, different set-  
tings are called up and carried out in the vehicle,  
refer to Personal Profile, page 29.  
Adapter for spare key  
The adapter is required so that the vehicle can  
be started with the spare key or radio readiness  
can be switched on.  
Information on the required maintenance is also  
stored in the remote control, refer to Service  
data in remote control, page 186.  
28  
>
Settings for the display on the Control Dis-  
play:  
> Brightness of the Control Display, refer  
to page 72  
> Measuring units for consumption, route/  
distances, temperature, and pressure,  
refer to page 72  
> Language on Control Display, refer to  
page 72  
Remove the adapter from the holder in the  
glove compartment and slide the spare key into  
the adapter before use.  
> 12h/24h mode of the clock, refer to  
page 71  
> Date format, refer to page 72  
>
>
>
>
Drivelogic driving program in the Sequential  
mode, refer to page 57  
Personal Profile  
Showing optical warning for PDC Park Dis-  
tance Control*, refer to page 73  
The concept  
Selection and brightness of display in  
Head-Up Display*, refer to page 80  
You can set a number of functions of your BMW  
individually according to your preferences. Per-  
sonal Profile ensures that most of these set-  
tings are stored for the remote control currently  
in use without you having to do anything. When  
the vehicle is unlocked, the corresponding  
remote control is detected and the settings  
stored for it are called up and carried out.  
Air distribution, temperature in the upper  
body area and intensity of the automatic air  
conditioning system, refer to page 88  
>
Setting voice instructions for destination  
guidance in the navigation system*, refer to  
page 127  
This means that you will always find your BMW  
set to your own personal settings even if  
another person with his/her own remote control  
and settings has used the vehicle since the last  
time you drove it. The individual settings are  
stored for a maximum of four remote controls.  
In addition, the following, most recently  
selected settings are recalled during unlocking:  
>
>
>
>
Positions of driver's seat, outside mirrors,  
and steering wheel*, refer to page 42  
Audio sources, volume and tone settings,  
refer to page 133  
Personal Profile settings  
Radio, displaying stored stations, refer to  
page 136  
Details on the settings are provided on the  
specified pages.  
Telephone, setting volume, refer to  
pages 158, 164  
>
When unlocking with the remote control,  
either unlock only the driver's door or the  
entire vehicle, refer to page 30  
Central locking system  
>
>
>
Locking the vehicle after a short time or  
after starting off, refer to page 32  
The concept  
Assigning the programmable button on the  
steering wheel, refer to page 47  
The central locking system is ready for opera-  
tion whenever the driver's door is closed.  
Individual settings for MDrive, refer to  
page 48  
The system simultaneously engages and  
releases the locks on the following:  
>
Doors  
29  
>
>
Luggage compartment lid  
Fuel filler door  
1. Press the  
button.  
This opens the start menu.  
2. Press the controller to open the menu.  
Operating from outside  
3. Select "Vehicle settings" and press the  
controller.  
>
>
>
via the remote control  
via the door lock  
4. Select "Door locks" and press the control-  
ler.  
with comfort access* via the door handles  
At the same time, the anti-theft system is also  
operated. It prevents the doors from being  
unlocked using the lock buttons or door han-  
dles. The interior lamps and the courtesy lamps  
are also switched on and off with the remote  
control. The alarm system is armed/disarmed at  
the same time.  
You can find more detailed information on the  
alarm system on page 34.  
5. Select "Central locking" and press the con-  
troller.  
Operating from inside  
Via the button for central locking, refer to  
page 32. The fuel filler door is not locked.  
6. Select "Unlock button" and press the con-  
troller.  
In an accident of sufficient severity, the central  
locking system automatically unlocks the vehi-  
cle. In addition, the hazard warning flashers and  
interior lamps come on.  
7. Select a menu item:  
> "All doors"  
Press the  
button once to unlock the  
entire vehicle.  
> "Driver's door only"  
Press the  
button once to unlock only  
Opening and closing: from  
outside  
the driver's door and the fuel filler door.  
Press the button twice to unlock the  
entire vehicle.  
Using remote control  
Because any persons or animals left unat-  
tended in a parked vehicle could lock the  
doors from the inside, you should always keep  
the remote control with you; this precaution  
ensures that you will remain able to unlock the  
vehicle from the outside at all times.<  
Unlocking  
Press the  
button.  
This unlocks the vehicle.  
8. Press the controller.  
You can set how the vehicle is unlocked. The  
setting is stored for the remote control currently  
in use.  
Convenience opening  
Press the  
button longer. The windows and  
the glass sunroof* open.  
iDrive, for explanation of principle, refer to  
page 16.  
30  
5. Select "Confirmation" and press the con-  
troller.  
Locking  
Press the  
button.  
Switching on interior lamps  
With vehicle locked:  
Press the  
button.  
You can also use this function to locate your  
vehicle in parking garages etc.  
Panic mode*  
You can also trigger the alarm system in case of  
danger:  
6. Select the desired signal.  
Press the  
button for at least 3 seconds.  
7. Press the controller.  
The signal is activated.  
Switch off alarm: press any button.  
Malfunctions  
Opening luggage compartment lid  
The remote control may malfunction due to  
local radio waves. Should the remote control fail  
to operate owing to interference of this kind,  
unlock and lock the vehicle via the door lock  
using a key.  
Press the  
button for approx. 1 second.  
The luggage compartment lid opens, regard-  
less of whether it was previously locked or  
unlocked.  
During opening, the luggage compart-  
ment lid pivots back and up. Ensure that  
adequate clearance is available before opening.  
To prevent accidentally locking yourself out,  
never lay the remote control in the luggage  
compartment. A previously locked luggage  
compartment lid is also locked again after clos-  
ing.<  
If it is no longer possible to lock the vehicle  
using the remote control, then the battery is  
discharged. Use this remote control during an  
extended drive; this will recharge the battery,  
refer to page 28.  
For US owners only  
The transmitter and receiver units comply with  
part 15 of the FCC/Federal Communication  
Commission regulations. Operation is gov-  
erned by the following:  
Setting confirmation signals  
You can vary or also deactivate the confirmation  
signals for locking or unlocking.  
FCC ID:  
1. Open the start menu.  
LX8766S  
LX8766E  
LX8CAS  
LX8CAS2  
2. Press the controller to open the menu.  
3. Select "Vehicle settings" and press the  
controller.  
4. Select "Door locks" and press the control-  
ler.  
Compliance statement:  
This device complies with part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions:  
>
This device must not cause harmful inter-  
ference, and  
>
this device must accept any interference  
received, including interference that may  
cause undesired operation.  
31  
Any unauthorized modifications or  
changes to these devices could void the  
user's authority to operate this equipment.<  
Opening and closing: from  
inside  
Using door lock  
This button serves to unlock or lock doors and  
the luggage compartment lid with the front  
doors closed, but does not activate the anti-  
theft system. The fuel filler door remains  
unlocked.  
When unlocking  
1. Turning the key once unlocks the driver's  
door and the fuel filler door.  
You can also set the situations in which the  
vehicle is locked.  
2. Turning the key a second time unlocks the  
remaining doors and the luggage compart-  
ment lid.  
iDrive, for explanation of principle, refer to  
page 16.  
1. Press the  
button.  
Convenience operation  
This opens the start menu.  
You also have the option of operating the win-  
dows and the glass sunroof* from the driver's  
door lock.  
2. Press the controller to open the menu.  
3. Select "Vehicle settings" and press the  
controller.  
Turn and hold the key in the positions for  
unlocking or locking.  
4. Select "Door locks" and press the control-  
ler.  
Watch during the closing process to be  
sure that no one is injured. Releasing the  
key stops the operation.<  
5. Select "Central locking" and press the con-  
troller.  
Manual operation  
In the event of an electrical malfunction, you can  
turn a key all the way to the right or left in the  
door lock to lock or unlock the driver's door.  
6. Select a menu item:  
> "Relock door if not opened"  
The central locking system automati-  
cally locks the vehicle after a short time  
when no door has been opened.  
32  
> "Lock after driving"  
Luggage compartment lid  
The central locking system automati-  
cally locks the vehicle as soon as you  
start to drive.  
During opening, the luggage compart-  
ment lid pivots back and up. Ensure that  
adequate clearance is available before open-  
ing.<  
7. Press the controller.  
The setting is selected.  
The setting is stored for the remote control cur-  
rently in use.  
Opening from inside  
Unlocking and opening doors  
>
Either unlock the doors together with the  
button for the central locking system and  
then pull the door handle above the armrest  
or  
>
pull on the door handle of each door twice:  
the first time unlocks the door, the second  
time opens it.  
Press the button: the luggage compartment lid  
opens.  
Locking  
>
Use the central locking button to lock all of  
the doors simultaneously, or  
Opening from outside  
>
press down the lock button of a door. To  
prevent you from being locked out, the  
open driver's door cannot be locked using  
the lock button.  
Because any persons or animals left unat-  
tended in a parked vehicle could lock the  
doors from the inside, you should always keep  
the remote control with you; this precaution  
ensures that you will remain able to unlock the  
vehicle from the outside at all times.<  
Press the button on the luggage compartment  
lid or the  
button on the remote control for  
approx. 1 second: the luggage compartment lid  
opens.  
Doors  
Closing  
Automatic soft closing*  
Make sure that the closing path of the  
luggage compartment lid is clear, other-  
wise injuries may result.<  
To close the doors, merely press it closed gen-  
tly. The closing process will then be carried out  
automatically.  
Make sure that the closing path of the  
doors is clear; as otherwise injuries may  
result.<  
33  
The handle recesses on the interior trim of the  
luggage compartment lid make it easier to pull  
down.  
2. Pull the ring. The luggage compartment lid  
is unlocked and opens.  
Only grasp the emergency release by  
the ring, otherwise injuries can  
occur.<  
Emergency release  
Pull lever in luggage compartment. The lug-  
gage compartment lid is unlocked.  
Reinstalling rear seat:  
1. Position the rear seat in the vehicle. Guide  
the two outer belt buckles 3 through the  
seat bench and slide the seat bench com-  
pletely under the backrest. The middle belt  
buckle 4 must be guided between the seat  
bench and the backrest when doing so.  
Manual release  
If an electrical malfunction should occur, you  
can unlock the luggage compartment lid manu-  
ally.  
Do not twist the center belt buckle, as  
otherwise correct operation of this  
safety equipment is not ensured.<  
2. Press the rear seat downward into the  
mounts at the front until it audibly engages.  
Alarm system  
1. Grasp the rear seat 1 at the front edge and  
remove from the mounts 2. Take out the  
rear seat.  
The concept  
The vehicle alarm system responds:  
>
>
When a door, the hood, or the luggage com-  
partment lid is opened  
To movements in the vehicle: interior  
motion sensor, refer to page 35  
34  
>
>
To changes in the vehicle's tilt if someone  
attempts to steal the wheels or tow the  
vehicle  
10 seconds. However, the interior motion  
sensor is not activated.  
>
>
The indicator lamp goes out after unlocking:  
your vehicle has not been disturbed while  
you were away.  
To interruptions in battery voltage  
Unauthorized operations are briefly signaled by  
the alarm system:  
The indicator lamp flashes after unlocking  
until the remote control is inserted into the  
ignition lock, however for a maximum of  
approx. 5 minutes: your vehicle has been  
disturbed while you were away.  
>
>
>
with an acoustic alarm  
by switching on the hazard warning flashers  
by flashing the high beams  
Arming and disarming alarm system  
Tilt alarm sensor  
When you lock or unlock the vehicle, either with  
the remote control or at the door lock, the alarm  
system is armed or disarmed at the same time.  
The tilt of the vehicle is monitored. The alarm  
system reacts, e.g. in case of an attempted  
wheel theft or towing.  
The luggage compartment lid can also be  
Interior motion sensor  
opened with the system armed with the  
but-  
ton on the remote control, refer to page 33.  
When the luggage compartment lid is closed, it  
is locked and monitored again.  
In order for the interior motion sensor to func-  
tion properly, the windows and glass sunroof*  
must be completely closed.  
Switching off alarm  
Avoiding unintentional alarms  
>
Unlock the vehicle using the remote control,  
refer to page 30.  
The tilt alarm sensor and interior motion sensor  
may be switched off at the same time. This pre-  
vents unintentional alarms, e.g. in the following  
situations:  
>
Insert the remote control all the way into the  
ignition lock.  
>
>
>
In stacking garages  
Indicator lamp displays  
When transporting on car-carrying trains  
When animals are to remain in the vehicle  
Switching off tilt alarm sensor and  
interior motion sensor  
Press the  
button on the remote control  
again as soon as the vehicle is locked.  
The indicator lamp lights up briefly and then  
flashes continuously. The tilt alarm sensor and  
the interior motion sensor are switched off until  
the next time the vehicle is unlocked and subse-  
quently locked again.  
>
>
The indicator lamp under the inside rear-  
view mirror flashes continuously: the sys-  
tem is armed.  
The indicator lamp flashes after locking: the  
doors, hood or luggage compartment lid are  
not properly closed. Even if you do not close  
the alerted area, the system begins to mon-  
itor the remaining areas, and the indicator  
lamp flashes continuously after approx.  
35  
Releasing  
Comfort access*  
Comfort access enables you to access your  
vehicle without having to hold the remote con-  
trol in your hand. It is sufficient to carry the  
remote control with you, e.g. in your jacket  
pocket. The vehicle automatically detects the  
related remote control in the immediate vicinity  
or in the interior.  
Comfort access supports the following func-  
tions:  
Completely grasp a door handle, arrow 1.  
>
>
>
Unlocking/locking vehicle  
Comfort locking  
This corresponds to pressing the  
button.  
If a remote control is detected in the interior  
after unlocking, the electric steering-wheel lock  
unlocks, refer to page 53.  
Opening luggage compartment lid  
separately  
>
Starting engine  
Locking  
Functional requirement  
>
>
For the driver's door, touch the area high-  
lighted in the picture, arrow 2, with your fin-  
ger for approx. 1 second.  
>
The vehicle or the luggage compartment lid  
can only be locked if the vehicle detects that  
the remote control you are carrying is out-  
side the vehicle.  
For the remaining doors, touch the area  
highlighted in the picture, arrow 3, with your  
finger for approx. 1 second.  
>
>
The next unlocking and locking cycle is not  
possible until after approx. 2 seconds.  
This corresponds to pressing the  
ton.  
but-  
The engine can only be started if the vehicle  
detects that the remote control is located in  
the vehicle.  
Please make sure that the ignition and all  
current consumers are switched off  
before locking to save the battery.<  
Comparison with ordinary remote  
control  
Comfort locking  
You can control the functions mentioned previ-  
ously with the comfort access or by pressing  
the buttons on the remote control. Therefore,  
please familiarize yourself with the information  
on opening and closing beginning on page 28  
beforehand.  
Hold a finger or the back of the hand on the sur-  
face, arrow 2 or 3.  
The windows and the glass sunroof* are  
closed.  
Watch during the closing process to be  
sure that no one is injured. Removing the  
hand from the door handle stops the closing  
process immediately.<  
The special features when using comfort  
access are described in the following.  
Should a short delay occur when opening  
or closing the windows or the glass sun-  
roof, the system is checking whether a remote  
control is located in the vehicle. Please repeat  
opening or closing if necessary.<  
Opening luggage compartment lid  
separately  
Press the button on the luggage compartment  
lid. This corresponds to pressing the  
button.  
If a remote control accidentally left in the  
luggage compartment is detected in the  
36  
locked vehicle after closing the luggage com-  
partment lid, the lid opens again. The hazard  
warning flashers flash and a signal* sounds.<  
3. Lay in new battery with positive side facing  
upward.  
4. Press cover closed.  
Return used battery to a recycling collec-  
tion point or to your BMW center.<  
Switching on radio readiness  
By briefly pressing the Start/Stop button, you  
switch on the radio readiness, refer to page 53.  
When doing so, do not depress the brake  
pedal, otherwise the engine will start.<  
Windows  
To prevent injuries, exercise care when  
closing the windows and keep them in  
your field of vision until they are shut.  
Always take along the remote control when you  
leave the vehicle, otherwise children could, for  
example, operate the windows and injure them-  
selves.<  
Starting engine  
You can start the engine or switch on the switch  
on ignition if a remote control is located in the  
interior of the vehicle. It need not be inserted in  
the ignition lock, refer to page 53.  
If you take the remote control with you when  
leaving the vehicle with the engine running, a  
warning lamp lights up. In addition, a message  
appears on the Control Display. As long as no  
remote control is detected in the vehicle, it is  
only possible to restart the engine within  
approx. 10 seconds after it is switched off.  
Opening, closing  
Malfunction  
The comfort access function may malfunction  
due to local radio waves. Then open or close the  
vehicle with the buttons on the remote control  
or with a key. To start the engine following this,  
insert the remote control in the ignition lock.  
>
>
Press switch to resistance point:  
The window continues to open as long as  
you keep the switch pressed.  
Press switch beyond resistance point:  
The window opens automatically. Pressing  
the switch again stops the opening move-  
ment.  
Replacing battery  
The remote control for comfort access contains  
a battery which must be replaced if necessary.  
1. Remove integrated key from remote con-  
trol, refer to page 28.  
You can close the windows in the same manner  
by pulling the switch.  
2. Remove cover.  
Separate switches for the rear windows are  
located in the rear.  
For information on using the convenience oper-  
ation at the door lock or with the remote control,  
refer to page 30 or 32.  
For information on comfort closing with comfort  
access, refer to page 36.  
37  
unchecked closing of the windows could lead to  
injuries.<  
After switching off ignition  
You can still operate the windows with the  
remote control removed or the ignition  
switched off for approx. 1 minute, as long as  
neither of the front doors has been opened.  
Glass sunroof*, electric  
The glass sunroof is ready for operation with  
the ignition switched on, refer to page 53.  
Pinch protection system  
If the closing force rises beyond a predefined  
threshold during closing, the system will imme-  
diately stop moving the window prior to lower-  
ing it slightly.  
To prevent injuries, exercise care when  
closing the glass sunroof and keep it in  
your field of vision until it is closed.  
Always take along the remote control when you  
leave the vehicle, otherwise children could, for  
example, operate the roof and injure them-  
selves.<  
Despite the pinch protection system,  
inspect the window's travel path prior to  
closing it, as the safety system might fail to  
detect certain kinds of obstructions, such as  
thin objects, and the window would continue  
closing.  
Pulling the switch beyond the resistance point  
and holding it limits the response of the pinch  
protection system. In this case, if the closing  
force exceeds a defined threshold, the window  
will only open a little.  
If the switch is pulled past the resistance point  
again within approx. 4 seconds, the pinch pro-  
tection system will be deactivated.  
Do not install any accessories in the range of  
movement of the windows, as otherwise the  
pinch protection system will be impaired.<  
Raising  
Press switch.  
>
>
The closed glass sunroof is raised and the  
sliding visor opens slightly.  
Safety switch  
The opened glass sunroof automatically  
moves into the raised position. The sliding  
visor remains completely open.  
Do not use force to close the headliner  
insert with the glass sunroof in its raised  
position, otherwise the mechanism will be dam-  
aged.<  
Opening, closing  
>
>
Press switch back to the resistance point.  
The glass sunroof and the sliding visor open  
together for as long as you hold the switch  
in this position.  
With the safety switch, you can prevent the rear  
windows from being opened or closed via the  
switches in the rear passenger area, by chil-  
dren, for example. The LED lights up when this  
safety feature is activated.  
Press switch back past the resistance point.  
The glass sunroof and the sliding visor open  
automatically. Briefly press the switch again  
to stop the opening movement.  
Always press the safety switch when  
children ride in the rear, otherwise  
38  
In a similar manner, the glass sunroof closes  
when you slide the switch forward. The sliding  
visor remains open and can be closed by hand.  
Moving manually  
In the event of an electrical malfunction, you can  
move the glass sunroof manually:  
For information on using the convenience oper-  
ation at the door lock or with the remote control,  
refer to page 30 or 32.  
1. Fold the cover panel down, if necessary  
using a screwdriver from the onboard tool  
kit, refer to page 188.  
For information on comfort closing with comfort  
access, refer to page 36.  
Automatic opening and closing  
Press the switch past the resistance point.  
The following movements are also automatic:  
>
>
When the sunroof is open, press the switch  
in the lifting direction: the sunroof is raised  
all the way.  
When the sunroof is raised, press the  
switch in the opening direction: the sunroof  
is opened all the way.  
2. Insert the Allen wrench supplied with the  
onboard tool kit, refer to page 188, into the  
opening provided. Move the glass sunroof  
in the desired direction. The arrow below  
indicates the rotation direction for closing.  
Pressing the switch again stops the motion.  
Pinch protection system  
If the glass sunroof encounters resistance when  
closing from roughly the center of the roof  
opening or when closing from the raised posi-  
tion, the closing action is interrupted and the  
glass sunroof reopens a short way.  
Despite the pinch protection system,  
inspect the sunroof's travel path prior to  
closing it, as the safety system might fail to  
detect certain kinds of obstructions, such as  
very thin objects, and the sunroof would con-  
tinue closing.  
Pressing the switch beyond the resistance  
point and holding it there deactivates the pinch  
protection system.<  
Following interruptions in electrical  
power supply  
After a power loss, the sunroof may only  
respond to the lift command. The system must  
be initialized. BMW recommends having this  
work done by your BMW center.  
39  

Related Topics

Popular Owner Manuals