Controls -> Climate control for Your BMW M6 4 Door Third Generation (2012-2019)

Climate control  
Controls  
Climate control  
the selected options or country versions. This  
also applies to safety-related functions and  
systems. The respectively applicable country  
provisions must be observed when using the  
respective features and systems.  
Vehicle features and options  
This chapter describes all standard, country-  
specific and optional features offered with the  
series. It also describes features that are not  
necessarily available in your car, e. g., due to  
Automatic climate control  
1
2
3
4
5
6
7
8
9
Air distribution, left  
11 Air distribution, right  
Temperature, left  
12 Seat heating, rightꢀꢁ51  
13 Active seat ventilation, rightꢀꢁ51  
AUTO program, left  
Air flow, AUTO intensity, left, residual heat  
Remove ice and condensation  
Maximum cooling  
14 Automatic recirculated-air control/recircu‐  
lated-air mode  
15 Cooling function  
16 Rear window defroster  
17 SYNC program  
Display  
Air flow, AUTO intensity, right  
AUTO program, right  
18 Active seat ventilation, leftꢀꢁ51  
19 Seat heating, leftꢀꢁ51  
10 Temperature, right  
139  
Controls  
Climate control  
Hints  
AUTO program  
Sufficient ventilation  
Press button.  
Air flow, air distribution and tempera‐  
ture are controlled automatically.  
When remaining in the vehicle for an ex‐  
tended period of time, ensure sufficient exter‐  
nal ventilation. Do not continuously use recir‐  
culated-air mode; otherwise the air quality in  
the interior continuously deteriorates and win‐  
dow condensation increases.◀  
Depending on the selected temperature,  
AUTO intensity program and outside influen‐  
ces, the air is directed to the windshield, side  
windows, upper body, and into the footwell.  
The cooling function, refer to page 141, is  
switched on automatically with the AUTO pro‐  
gram.  
Climate control functions in detail  
Manual air distribution  
At the same time, a condensation sensor con‐  
trols the program so as to prevent window  
condensation as much as possible.  
Press button repeatedly to select a  
program:  
Upper body region.  
Intensity of the AUTO program  
Upper body region and footwell.  
Footwell.  
With the AUTO program activated, the auto‐  
matic intensity control can be changed.  
Windows and footwell.  
Press the left or right side of the but‐  
ton: decrease or increase the inten‐  
sity.  
Windows, upper body region, and footwell.  
Windows: driver's side only.  
Windows and upper body region.  
The selected intensity is shown on the display  
of the automatic climate control.  
If the windows are fogged over, press the  
AUTO button on the driver's side to utilize the  
condensation sensor.  
Air flow, manual  
To manually adjust air flow turn off AUTO pro‐  
gram first.  
Temperature  
Turn the ring to set the desired  
temperature.  
Press the left or right side of the but‐  
ton: decrease or increase air flow.  
The selected air flow is shown on the display of  
the automatic climate control.  
The automatic climate control achieves this  
temperature as quickly as possible, if needed  
by using the maximum cooling or heating li‐  
dacity, and then keeps it constant.  
The air flow of the automatic climate control  
may be reduced automatically to save battery  
power.  
Do not rapidly switch between different tem‐  
perature settings. Otherwise, the automatic cli‐  
mate control will not have sufficient time to ad‐  
just the set temperature.  
Defrosts windows and removes  
condensation  
Press button.  
140  
Climate control  
Controls  
Ice and condensation are quickly removed  
from the windshield and the front side win‐  
dows.  
button on the driver's side to utilize the con‐  
densation sensor. Make sure that air can flow  
to the windshield.  
For this purpose, point the side vents onto the  
side windows as needed.  
Sufficient ventilation  
When remaining in the vehicle for an ex‐  
tended period of time, ensure sufficient exter‐  
nal ventilation. Do not continuously use recir‐  
culated-air mode; otherwise the air quality in  
the interior continuously deteriorates and win‐  
dow condensation increases.◀  
Adjust air flow with the program active.  
If the windows are fogged over, you can also  
switch on the cooling function or press the  
AUTO button to utilize the condensation sen‐  
sor.  
Cooling function  
Maximum cooling  
The car's interior can only be cooled with the  
engine running.  
Press button.  
The system is set to the lowest tem‐  
perature, optimum air flow and air circulation  
mode.  
Press button.  
The air will be cooled and dehumidi‐  
fied and, depending on the temperature set‐  
ting, warmed again.  
Air flows out of the vents to the upper body re‐  
gion. The vents need to be open for this.  
Depending on the weather, the windshield and  
side windows may fog up briefly when the en‐  
gine is started.  
The function is available above an external  
temperature of approx. 32 ℉/0 ℃ and with the  
engine running is indicated.  
The cooling function is switched on automati‐  
cally with the AUTO program.  
Adjust air flow with the program active.  
When using the automatic climate control,  
condensation water, refer to page 161, devel‐  
ops that exits underneath the vehicle.  
Automatic recirculated-air control/  
recirculated-air mode  
You may respond to unpleasant odors or pollu‐  
tants in the immediate environment by tempo‐  
rarily suspending the supply of outside air. The  
system then recirculates the air currently  
within the vehicle.  
Rear window defroster  
Press button.  
The rear window defroster switches  
Press button repeatedly to select an  
operating mode:  
off automatically after a certain period of time.  
SYNC program  
LEDs off: outside air flows in continuously.  
Press button.  
Left LED on, automatic recirculated-air  
control: a sensor detects pollutants in the  
outside air and shuts off automatically.  
Current settings on the driver's side  
for the temperature, air flow, air distribution,  
and AUTO program are transferred to the front  
passenger side.  
Right LED on, recirculated-air mode: the  
supply of outside air into the vehicle is per‐  
manently blocked.  
The program is switched off if the settings on  
the front passenger side are changed.  
If the windows are fogged over, switch off the  
recirculated-air mode and press the AUTO  
141  
Controls  
Climate control  
Switching on  
Residual heat  
The heat stored in the engine is used to heat  
the interior.  
Press any button except:  
Rear window defroster.  
Left side of Air volume button.  
Seat heating.  
Functional requirement  
Up to 15 minutes after switching off the  
engine.  
Seat ventilation.  
If necessary, SYNC program.  
Warm engine.  
The battery is sufficiently charged.  
External temperature below 77 ℉/25 ℃.  
Microfilter/activated-charcoal filter  
The microfilter removes dust and pollen from  
the incoming air.  
The availability of the function is shown on the  
display of the automatic climate control.  
The activated-charcoal filter removes gaseous  
pollutants from the outside air that enters the  
vehicle.  
Switching on  
1. Switch off the ignition.  
This combined filter should be replaced during  
scheduled maintenance, refer to page 187, of  
your vehicle.  
2.  
Press the right side of the button  
on the driver's side.  
The symbol appears on the automatic cli‐  
mate Control Display.  
Ventilation  
The interior temperature, air volume and air  
distribution can be adjusted with the ignition  
switched on.  
Front ventilation  
Switch off  
At the lowest fan speed, press the left side of  
the button on the driver's side.  
The symbol on the display of the automatic  
climate control flashes.  
Switching the system on/off  
Switch off  
Thumbwheel to vary the temperature, ar‐  
row 1.  
Complete system:  
Press and hold the left button on  
the driver's side until the control  
clicks off.  
On the front passenger side:  
Press and hold the left button on  
the front passenger side.  
Toward blue: colder.  
Toward red: warmer.  
The set interior temperature for the driver  
and passenger are not changed.  
Lever for changing the air flow direction,  
arrow 2.  
Thumbwheels for opening and closing the  
vents continuously, arrows 3.  
142  
Climate control  
Controls  
Adjusting the ventilation  
Activating the reel-on time  
Ventilation for cooling:  
On the Control Display:  
Direct vent in your direction when vehicle's  
interior is too hot.  
1. "Settings"  
2. "Climate"  
Draft-free ventilation:  
3. "Activate timer 1" or "Activate timer 2"  
Adjust the vent to let the air flow past you.  
The symbol on the automatic climate con‐  
trol lights up when the reel-on time is acti‐  
vated.  
Parked-car ventilation  
The symbol on the automatic climate con‐  
trol flashes when the system has been  
switched on.  
The concept  
The parked-car ventilation ventilates the vehi‐  
cle interior and lowers its temperature, if  
needed.  
The system will only be switched on within the  
next 24 hours. After that, it needs to be reacti‐  
vated.  
Operation can be performed via iDrive.  
Functional requirements  
Parked-car ventilation  
Using the preset reel-on time or when op‐  
erated directly: any external temperature.  
Open the vents to allow air to flow out.  
Switching on/off directly  
On the Control Display:  
1. "Settings"  
2. "Climate"  
3. "Activate comf. ventilation"  
The symbol on the automatic climate con‐  
trol flashes if the system is switched on.  
The system continues to run for some time af‐  
ter being switched off.  
Preselecting the reel-on time  
On the Control Display:  
1. "Settings"  
2. "Climate"  
3. "Timer 1:" or "Timer 2:"  
4. Set the desired time.  
143