2022-2025 BMW X1 SUV CONTROLS -> Displays User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

CONTROLS -> Displays for Your BMW X1 SUV Third Generation (2022-2025)

Displays  
CONTROLS  
Displays  
Adjusting the display  
In the Live Vehicle menu, adaptive content or  
various static content for the display can be  
selected on the left-hand side bar:  
Vehicle features and options  
This chapter describes model-specific equip-  
ment, systems, and functions that are currently  
available, or may become available in the fu-  
ture, even if they are not present in the vehicle.  
1. To adjust the display, go through the menu  
as follows: Apps menu / "Vehicle" / "Live  
Vehicle".  
Additional information:  
Vehicle equipment, refer to page 8.  
2. Select the desired setting.  
Live Vehicle  
BMW Head-up display  
Principle  
Principle  
Live Vehicle is a virtual representation of your  
vehicle with different information, e.g., vehicle  
status or current driving condition.  
The Head-up display projects important infor-  
mation in the driver's field of view, for instance  
the speed. Information can be recorded with-  
out you having to look away from the road.  
General information  
The steering wheel buttons can be used to  
configure various views for the Head-up dis-  
play. Additional settings can be made on the  
control display, e.g., brightness or height.  
Corresponding information is shown on the  
control display depending on the driving situa-  
tion. Fault statuses are not taken into account.  
Adaptive content or various static content can  
be selected.  
General information  
Follow instructions for cleaning the Head-up  
display in the Vehicle Care chapter.  
Displayable content  
The following Live Vehicle content is displayed  
in alternating sequence or statically depending  
on the setting:  
Additional information:  
Caring for special components, refer to  
page 390.  
▷
▷
▷
▷
▷
Vehicle status, refer to page 152.  
Current driving condition, refer to page 152.  
Sport displays, refer to page 152.  
Efficiency trainer, refer to page 322.  
Trip data, refer to page 148.  
The displayed content may depend on the se-  
lected drive mode.  
135  
Displays  
CONTROLS  
Select the menu by tilting the knurled wheel  
on the steering wheel where applicable.  
Overview  
3. Select the desired setting using the knurled  
wheel on the steering wheel.  
Turning the Head-up display on/off  
To turn the Head-up display on/off, go through  
the menu as follows: Apps menu / "Vehicle" /  
"Displays" / "Head-up display" / "Head-up  
display".  
Head-up display views are projected onto the  
windshield through a protective glass. The pro-  
tective glass is located between the steering  
wheel and windshield.  
Settings  
Various settings can be configured for the  
Head-up display, e.g., height, rotation, or  
brightness. You can also set up specific views  
on the Head-up display separately, e.g., for  
Driver Assistance information.  
Displayable information  
The following information is displayed on the  
Head-up display:  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Displays" / "Head-up  
display".  
▷
▷
▷
▷
▷
▷
▷
▷
Speed.  
Navigation instructions.  
Check Control messages.  
Sport displays.  
2. Select the desired setting.  
Depending on vehicle equipment, the height of  
the Head-up display can be stored using the  
memory function.  
Shift lights.  
The Efficiency Coach.  
Lists and messages.  
The driver assistance systems.  
Visibility of the display  
The visibility of the displays in the Head-up  
display is influenced by the following factors:  
Some of this information is only displayed  
briefly as needed.  
▷
▷
Seat position.  
Objects on the Head-up display's protective  
glass.  
Configuring a view  
Views can be configured for the Head-up dis-  
play independently of the view on the instru-  
ment cluster, e.g., reduced view.  
▷
Dust or dirt on the Head-up display's pro-  
tective glass.  
▷
▷
▷
▷
Windshield dirty on inside or outside.  
Sunglasses with certain polarization filters.  
Wet road.  
1.  
Press the Settings button on the  
steering wheel.  
Unfavorable light conditions.  
If the image is distorted, have the basic set-  
tings checked by an authorized service center  
or another qualified service center or repair  
shop.  
A menu bar is displayed in the instrument  
cluster.  
2. "HEAD-UP"  
136  
Displays  
CONTROLS  
Special windshield  
The special windshield is part of the Head-up  
display system.  
Displaying stored Check Control  
messages  
Saved Check Control messages and additional  
information such as the cause of a fault or  
the required action can be called up via Check  
Control.  
The shape and coating of the special wind-  
shield enable this system to function.  
If damaged, have the special windshield re-  
placed by an authorized service center or an-  
other qualified service center or repair shop.  
Depending on the Check Control message, fur-  
ther help can be selected.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Vehicle status" / "Check  
Control".  
Check Control  
2. Select the desired text message.  
Principle  
The Check Control system monitors functions  
in the vehicle and notifies you of faults in the  
monitored systems.  
Display  
A Check Control message is displayed in the  
instrument cluster as a text message with an  
icon.  
A Check Control message is displayed as  
a combination of indicator lights or warning  
lights and text messages on the instrument  
cluster and, if applicable, on the Head-up dis-  
play. In addition, an acoustic signal may sound  
and a text message may appear on the control  
display.  
For urgent messages, an added text is auto-  
matically displayed on the control display. If  
several faults occur at once, the messages are  
displayed consecutively.  
Certain messages displayed while driving are  
displayed again after drive-ready state is  
switched off.  
Some Check Control messages are hidden au-  
tomatically after approx. 20 seconds, but they  
will be stored. Stored Check Control messages  
can be displayed on the control display. Urgent  
Check Control messages are permanently dis-  
played but may be hidden temporarily.  
Icons in the instrument cluster indicate  
an active or saved Check Control mes-  
sage.  
Hiding Check Control messages  
Permanently displayed Check Control mes-  
sages can be hidden temporarily. These mes-  
sages are automatically displayed again after  
approx. 8 seconds.  
An arrow icon next to the Check Control  
message indicates whether the Check Control  
message can be hidden.  
Indicator lights and warning lights  
Principle  
To hide Check Control messages, tilt  
the knurled wheel on the steering  
wheel to the left.  
The indicator lights and warning lights show  
the status of some vehicle functions or indicate  
when there is a fault in monitored systems.  
137  
Displays  
CONTROLS  
Indicator lights and warning lights can illumi-  
nate in a variety of combinations and colors.  
Have the vehicle checked immediately by an  
authorized service center or another qualified  
service center or repair shop.  
Some indicator lights are checked for proper  
functioning and illuminate temporarily when  
drive-ready state is turned on.  
Emergency Stop Assistant  
The Emergency Stop Assistant is trig-  
gered.  
Red lights  
Additional information:  
Seat belt reminder  
Emergency Stop Assistant, refer to page 198.  
Seat belt on the driver's seat is not  
buckled.  
Risk of collision  
Additional information:  
Seat belt reminder, refer to page 105.  
The warning light illuminates or flashes  
in conjunction with an acoustic signal if  
there is a risk of imminent collision.  
Airbag system  
Additional information:  
Warning light illuminates briefly: indi-  
cates that the entire airbag system and  
seat belt tensioners are operational  
Forward Collision Mitigation, refer to  
page 173.  
when drive-ready state is switched on.  
Pedestrian Warning  
Warning light does not illuminate or illuminates  
continuously: the airbag system or the seat  
belt tensioners may not be operational. Have  
the vehicle checked immediately by an author-  
ized service center or another qualified service  
center or repair shop.  
The warning light illuminates: risk of  
collision with a person, e.g., a pedes-  
trian or a cyclist detected. Increased  
awareness is required.  
The warning light flashes and a signal sounds:  
risk of imminent collision with a person, e.g.,  
a pedestrian or a cyclist detected. Immediately  
initiate braking or an evasive maneuver.  
Additional information:  
Airbags, refer to page 168.  
Additional information:  
Parking brake  
Warning function for pedestrians, refer to  
page 179.  
The parking brake is set.  
Additional information:  
Parking brake, refer to page 130.  
Forward Collision Warning  
The warning light illuminates: risk of  
collision, e.g., with a vehicle detected.  
Increased awareness is required.  
Brake system  
The brake pads are worn or there is  
another issue with the brake system.  
The warning light flashes and a signal sounds:  
risk of imminent collision with a vehicle de-  
tected. Immediately initiate braking or an eva-  
sive maneuver.  
The braking assistance may not be op-  
erational. A higher pedal force may be  
required for braking.  
Additional information:  
138  
Displays  
CONTROLS  
Warning function in rear-end collision situa-  
tions, refer to page 176.  
Assisted Driving Mode  
Warning light flashes and acoustic sig-  
nal sounds:  
Intersection Collision Warning: vehicle  
detected from the right  
The system is switched off or will be  
interrupted very soon.  
The warning light illuminates: risk of  
collision with a vehicle crossing from  
the right detected. Increased aware-  
ness is required.  
Warning light illuminates and acoustic signal  
sounds:  
The driver's line of sight is not directed at the  
surrounding traffic. System interruption is im-  
minent. The system reduces the speed to a  
standstill if applicable. It is possible that the  
system will not execute any supporting steer-  
ing movements.  
The warning light flashes and a signal sounds:  
risk of imminent collision with a crossing vehi-  
cle detected. Immediately initiate braking or an  
evasive maneuver.  
Additional information:  
Additional information:  
Warning function at intersections, refer to  
page 181.  
Assisted Driving Mode, refer to page 226.  
Assisted Driving Mode: Hands are not on  
steering wheel  
Intersection Collision Warning: vehicle  
detected from the left  
Warning light illuminates and acoustic  
signal sounds:  
The warning light illuminates: risk of  
collision with a vehicle crossing from  
the left detected. Increased awareness  
is required.  
The hands are not on the steering  
wheel or, depending on the vehicle equipment  
and national-market version, the driver's line of  
sight is not directed at the surrounding traffic.  
System interruption is imminent.  
The warning light flashes and a signal sounds:  
risk of imminent collision with a crossing vehi-  
cle detected. Immediately initiate braking or an  
evasive maneuver.  
The system reduces the speed to a standstill if  
applicable.  
Additional information:  
It is possible that the system will not execute  
any supporting steering movements.  
Warning function at intersections, refer to  
page 181.  
Immediately grasp the steering wheel with  
your hands and pay attention to the surround-  
ing traffic.  
Distance control  
Additional information:  
Warning light flashes and acoustic sig-  
nal sounds: Brake and evade as neces-  
sary.  
Assisted Driving Mode, refer to page 226.  
Additional information:  
Yellow lights  
Distance Control, refer to page 220.  
Antilock Braking System  
139  
Displays  
CONTROLS  
The system may not be operational.  
The Antilock Braking System is not  
available.  
authorized service center or another qualified  
service center or repair shop.  
Additional information:  
The ability to steer may be restricted during full  
braking.  
Dynamic Stability Control, refer to page 208.  
Have the vehicle checked immediately by an  
authorized service center or another qualified  
service center or repair shop.  
Dynamic Stability Control deactivated, or  
increased driving dynamics activated  
Dynamic Stability Control is deactivated  
or enhanced driving dynamics is acti-  
vated.  
Additional information:  
Antilock Braking System, refer to page 208.  
Additional information:  
Assisted Driving Mode  
▷
Dynamic Stability Control, refer to  
page 208.  
Warning light illuminates and acoustic  
signal sounds: A system interruption is  
imminent.  
▷
Setting for increased driving dynamics, re-  
fer to page 209.  
Warning light flashes: A lane boundary has  
been crossed.  
Drive-off support  
Drive-off support is activated.  
Additional information:  
Assisted Driving Mode, refer to page 226.  
Additional information:  
Drive-off support, refer to page 210.  
Assisted Driving Mode: Hands are not on  
steering wheel  
Flat tire monitor  
Steering wheel icon illuminates yellow:  
Warning light illuminates: Flat tire or  
tire pressure loss has been detected.  
Hands are not grasping the steering  
wheel. The system is still active.  
Reduce your speed and stop cau-  
tiously. Avoid sudden braking and steering  
maneuvers.  
Grab the steering wheel with your hands.  
Additional information:  
Assisted Driving Mode, refer to page 226.  
Additional information:  
Flat tire monitor, refer to page 351.  
Dynamic Stability Control  
Warning light flashes: Dynamic Stabil-  
ity Control is regulating the driving and  
brake power. The vehicle is stabilized.  
Reduce the vehicle speed and adjust your driv-  
ing style to the road conditions.  
Tire pressure monitor  
Warning light illuminates: Flat tire or  
tire pressure loss has been detected.  
Follow the information in the Check  
Control message.  
Warning light illuminates: Dynamic Stability  
Control has malfunctioned or is initializing.  
Driving stabilization is restricted or has failed.  
Warning light flashes then illuminates continu-  
ously: Flat tires or tire pressure losses cannot  
be detected.  
If the warning light illuminates continuously,  
have the vehicle checked immediately by an  
140  
Displays  
CONTROLS  
▷
▷
▷
▷
Fault caused by systems or devices with  
the same radio frequency: after leaving the  
area of the interference, the system auto-  
matically becomes active again.  
Have the vehicle checked by an authorized  
service center or another qualified service cen-  
ter or repair shop.  
Additional information:  
In the case of tires with special appro-  
val: the tire pressure monitor was unable  
to complete the reset. Reset the system  
again.  
Socket for OBD on-board diagnostics, refer to  
page 371.  
Green lights  
Wheel without wheel electronics installed:  
Have it checked by an authorized service  
center or another qualified service center or  
repair shop as needed.  
Turn signal  
The turn signal is turned on.  
Malfunction: have the vehicle checked by  
an authorized service center or another  
qualified service center or repair shop.  
If the indicator light is flashing unusu-  
ally fast, this indicates that a turn signal  
bulb has failed.  
Additional information:  
Additional information:  
Tire pressure monitor, refer to page 343.  
Turn signal, refer to page 154.  
Steering system  
Parking lights  
The steering system may not be op-  
erational.  
The parking lights are turned on.  
Additional information:  
Have the vehicle checked by an author-  
ized service center or another qualified service  
center or repair shop.  
Parking lights, low-beam headlights,  
refer to page 158.  
Low-beam headlights  
Exhaust emissions  
The low-beam headlights are turned  
on.  
▷
The warning light illuminates:  
The exhaust gas quality is declining,  
e.g., because the fuel filler cap is  
fitted incorrectly. Have the vehicle  
checked as soon as possible.  
Additional information:  
Parking lights, low-beam headlights, refer to  
page 158.  
▷
The warning light flashes under certain cir-  
cumstances:  
Automatic High Beam Assistant  
Low-beam headlights are turned on,  
and the Automatic High Beam Assis-  
tant is activated.  
This indicates that there is excessive misfir-  
ing in the engine.  
Reduce the vehicle speed and have the ve-  
hicle checked immediately; otherwise, se-  
rious engine misfiring within a brief pe-  
riod can seriously damage emission control  
components, in particular the catalytic con-  
verter.  
The high-beam headlights are turned on and  
off automatically depending on the traffic.  
Additional information:  
Automatic High Beam Assistant, refer to  
page 155.  
141  
Displays  
CONTROLS  
Lane departure warning  
Speed Limit Assistant  
The detected speed limit can be ap-  
plied with the SET button. As soon as  
the speed limit has been applied, a  
green checkmark is displayed.  
Depending on vehicle equipment and  
national-market version:  
Indicator light flashes: System is ac-  
tively issuing a warning. If necessary, the sys-  
tem performs a steering intervention.  
Additional information:  
Additional information:  
Speed Limit Assistant, refer to page 236.  
Lane departure warning, refer to page 185.  
Assisted Driving Mode  
Automatic Hold is activated  
The system supports the driver in  
keeping the vehicle within the lane.  
After stopping, Automatic Hold auto-  
matically secures the vehicle to prevent  
it from rolling away.  
Additional information:  
Assisted Driving Mode, refer to page 226.  
Additional information:  
Automatic Hold, refer to page 132.  
Lane Change Assistant: lane change in  
progress  
Automatic Hold holding the vehicle  
Arrow icon for lane change green: the  
system carries out a lane change.  
Automatic Hold secures the stopped  
vehicle to prevent it from rolling away,  
e.g., when stopped at a traffic light.  
Additional information:  
Lane Change Assistant, refer to page 230.  
Additional information:  
Automatic Hold, refer to page 132.  
Lane Change Assistant: lane change not  
possible  
Cruise Control  
Gray line for lane boundary on the ap-  
propriate side: system detected a lane  
change request. Lane change not cur-  
rently possible.  
The system is active.  
Additional information:  
Cruise control, refer to page 217.  
Additional information:  
Lane Change Assistant, refer to page 230.  
Distance control  
Indicator light illuminates: Vehicle has  
been detected ahead of you. The vehi-  
cle icon goes out if no vehicle has been  
detected ahead of you.  
Assisted Driving Mode Plus  
The system is active.  
Additional information:  
Indicator light flashes: Preceding vehicle has  
driven off.  
Assisted Driving Mode Plus, refer to  
page 233.  
Additional information:  
Distance Control, refer to page 220.  
142  
Displays  
CONTROLS  
Additional information:  
Blue lights  
Assisted Driving Mode, refer to page 226.  
High-beam headlights  
High-beam headlights have been  
turned on.  
White lights  
Additional information:  
Cruise Control with Distance Control  
High-beam headlights, refer to page 154.  
No Distance Control because accelera-  
tor pedal is being pressed.  
Automatic High Beam Assistant  
Additional information:  
Distance Control, refer to page 220.  
High-beam headlights have been  
turned on by the Automatic High Beam  
Assistant.  
Assisted Driving Mode Plus  
Additional information:  
The system can be used.  
Additional information:  
Automatic High Beam Assistant, refer to  
page 155.  
Assisted Driving Mode Plus, refer to  
page 233.  
Gray lights  
Seat belt reminder  
Selection lists  
Seat belt on the passenger seat or an-  
other seat in the vehicle is not buckled.  
Principle  
Additional information:  
Lists can be displayed and, if necessary, used  
for certain functions in the instrument cluster or  
the Head-up display.  
Seat belts, refer to page 103.  
Distance control  
▷
▷
▷
Entertainment source.  
Current audio source.  
List of recent calls.  
Indicator light flashes: Conditions are  
not adequate for the system to work.  
The system was deactivated but ap-  
plies the brakes until you actively resume con-  
trol by pressing on the brake pedal or accelera-  
tor pedal.  
If necessary, the corresponding menu will open  
on the control display.  
Displaying and using the list  
The selection lists can be displayed and op-  
erated using the operating elements on the  
steering wheel.  
Additional information:  
Distance Control, refer to page 220.  
Assisted Driving Mode  
The system is on standby and does not  
manipulate steering movements.  
System activates automatically as soon  
as all function conditions are fulfilled.  
143  
Displays  
CONTROLS  
3. Turn the knurled wheel to select a radio  
station.  
Operating Function  
elements  
4. Press the knurled wheel to confirm the se-  
lected radio station.  
Change the entertainment  
source.  
Pressing the button again will  
close the currently displayed list.  
Example: changing the entertainment  
source  
Show list of most recent tele-  
phone calls.  
1.  
Press the entertainment sources  
button.  
Turn the knurled wheel: display  
the list for currently selected en-  
tertainment source or scroll up  
or down in the list.  
2.  
To select an entertainment source,  
turn the knurled wheel.  
Tilt knurled wheel in corre-  
sponding direction: Move selec-  
tion to left or right.  
3. Press the knurled wheel to confirm the se-  
lected entertainment source.  
Press knurled wheel: confirm  
selection.  
Gear shift indicator  
Principle  
Display  
The shift point indicator recommends the gear  
that best suits the current driving situation. Us-  
ing the optimal gear supports an efficient driv-  
ing style.  
General information  
The gear shift indicator is active in manual  
mode M depending on vehicle equipment and  
national-market version.  
Selection lists, e.g., entertainment sources, are  
displayed on the instrument cluster.  
Displays  
Information on upshifts or downshifts or the  
engaged gear is displayed in the instrument  
cluster.  
Example: selecting a radio station  
On vehicles without a gear shift indicator, the  
engaged gear is displayed.  
1.  
To select a radio station, press the  
entertainment source button on the right of  
the steering wheel.  
2.  
To switch to the radio stations list,  
tilt the knurled wheel to the right.  
144  
Displays  
CONTROLS  
Display  
Example Description  
In continuous manual mode M:  
Optimal gear is engaged.  
With shift paddles: temporary  
manual mode.  
With shift paddles: Sport program.  
Without shift paddles: LOW mode.  
Shift information.  
Needle in lower range of arrow 1: display for  
energy recovery such as while decelerating,  
CHARGE.  
Needle in upper range of arrow 2: drive power  
in percent, POWER.  
Additional information:  
Reduced drive power  
The available drive power may be reduced due  
to certain factors. The power gauge is auto-  
matically adjusted accordingly.  
Shift paddles, refer to page 126.  
Power gauge  
In addition, the icons on the power gauge and  
tachometer indicate reduced drive power.  
Principle  
The power gauge indicates the currently  
drawn drive power as a percentage.  
Icon  
Description  
Blue icon: cold drivetrain.  
White icon: increased drive sys-  
tem temperature, for instance  
due to sustained or high  
power demand when driving  
on mountain roads.  
Enabling/disabling the power gauge  
The power gauge or the tachometer is dis-  
played depending on the selected drive mode  
or the individually configured layout.  
Depending on vehicle equip-  
ment and national-market ver-  
sion:  
Drive power limitation defined  
via the BMW Digital Key.  
System-related functional limi-  
tation.  
A Check Control message is  
displayed in addition where ap-  
plicable.  
145  
Displays  
CONTROLS  
Tachometer  
Engine temperature  
The engine temperature is displayed in the in-  
strument cluster.  
General information  
Always avoid engine speeds in the red warning  
field. In this range, the fuel supply is reduced to  
protect the engine.  
▷
If the engine is cold, the nee-  
dle is in the blue temperature  
range, close to the limit po-  
sition of the temperature dis-  
play. WARM-UP is also dis-  
played.  
Activating/deactivating the  
tachometer  
The tachometer is displayed depending on the  
selected drive mode or the individually config-  
ured layout.  
Drive at moderate RPM and  
vehicle speeds.  
▷
▷
At normal operating temperature, the nee-  
dle is in the middle or in the left half of the  
temperature display.  
The tachometer display changes depending  
on the selected driving mode.  
If the engine is hot, the needle is in the  
red temperature range. In addition, a Check  
Control message is displayed.  
Reduced rotational speed range  
The reduced rotational speed range may be  
due to certain factors, e.g., a cold drive sys-  
tem. The tachometer display is automatically  
adjusted depending on the available rotational  
speed range.  
Additional information:  
Coolant level, refer to page 367.  
Display  
The engine temperature is displayed in the in-  
strument cluster.  
Standby state and drive-  
ready state  
▷
If the engine is cold, the nee-  
dle is in the blue temperature  
range, close to the left-hand  
limit position of the temper-  
ature display. WARM-UP is  
also displayed.  
If OFF is displayed in the instru-  
ment cluster, drive-ready state  
is switched off and standby  
state is switched on.  
Drive at moderate RPM and  
vehicle speeds.  
If READY is displayed in the in-  
strument cluster, the Auto Start/  
Stop function is ready to start  
the engine automatically.  
▷
▷
At normal operating temperature, the nee-  
dle is in the middle or in the left half of the  
temperature display.  
If the engine is hot, the needle is in the  
red temperature range. In addition, a Check  
Control message is displayed.  
Additional information:  
▷
Operating state of the vehicle, refer to  
page 39.  
Additional information:  
▷
Auto Start/Stop function, refer to page 120.  
Coolant level, refer to page 367.  
146  
Displays  
CONTROLS  
Indicator light in the instrument  
cluster  
Functional requirements  
▷
Manual mode M must be activated.  
▷
Advanced mode must be activated.  
A red indicator light is displayed.  
Additional information:  
Advanced mode, refer to page 127.  
Outside temperature  
Display  
Principle  
If the outside temperature indicator drops to  
+37℉/+3℃ or lower, there is an increased risk  
of slippery conditions.  
A signal sounds and a Check Control message  
is displayed.  
When the vehicle is stationary or at low speed,  
the temperature displayed may differ slightly  
from the actual outside temperature due to ex-  
ternal environmental influences.  
Successive fields illuminating yellow indicate  
an upcoming shift point.  
▷
▷
Shift when all fields illuminate red at the  
latest.  
Safety information  
When the maximum rotational speed is  
reached, the entire display flashes red and  
the fuel supply is interrupted in order to  
protect the engine.  
Warning  
Even at temperatures above +37 ℉/+3 ℃  
there is a risk of icy roads, for instance on  
bridges or shady sections of the road. There  
is a risk of accident, injury, and property dam-  
age. Modify your driving style to the weather  
conditions at low temperatures.  
Central display range  
Displayable content  
In the central display area, the following set-  
tings can be selected:  
Shift lights  
▷
▷
▷
▷
▷
▷
▷
▷
The reduced display.  
Trip data, refer to page 148.  
Assisted View, refer to page 149.  
With navigation system: route preview.  
With navigation system: map view.  
G-Meter, refer to page 150.  
The entertainment.  
Principle  
Shift lights are temporarily displayed on the  
instrument cluster and indicate the correct time  
to upshift in order to achieve rapid accelera-  
tion.  
The Shift lights are active in M Manual mode  
and can be shown on the instrument cluster or  
Head-up display in combination with the tach-  
ometer.  
Augmented View.  
147  
Displays  
CONTROLS  
Depending on vehicle equipment, Aug-  
mented View on the instrument cluster en-  
ables the visualization of driver assistance  
systems on the actual vehicle's surround-  
ings.  
Trip data  
Principle  
The trip data display provides various informa-  
tion about the trip, e.g., average consumption  
or trip distance.  
Grey lines indicate the recommended min-  
imum distance to the preceding vehicle  
when speed control systems are deacti-  
vated.  
The trip data can be displayed on the control  
display and in the instrument cluster.  
▷
Android Auto©.  
Depending on the setting in the Live Vehicle  
menu, the trip data is shown on the control  
display.  
Depending on vehicle equipment and na-  
tional-market version, select functions of  
a compatible smartphone can also be dis-  
played, e.g., map views.  
The values can be displayed and reset de-  
pending on different intervals.  
Some contents for the central display range  
can also be configured as a view in the Head-  
up display.  
Display on the control display  
Displayable content  
Additional information:  
The following trip data is shown on the control  
display:  
Head-up display, refer to page 135.  
Owner's Manual for Navigation, Entertain-  
ment, and Communication, refer to page 6.  
▷
▷
Configured interval for trip data displays.  
The average fuel consumption depend-  
ing on the configured interval.  
Configuring the central display  
range  
The content of the central display range on the  
instrument cluster can be configured individu-  
ally, for instance the trip data display.  
▷
▷
▷
The travel time depending on the con-  
figured interval.  
The distance traveled depending on the  
configured interval.  
The distance traveled in coasting  
mode.  
1.  
Press the Settings button on the  
steering wheel.  
Displaying trip data continuously  
A menu bar is displayed in the instrument  
cluster.  
To display trip data permanently, go through  
the menu as follows: Apps menu / "Vehicle" /  
"Live Vehicle" / "Adaptive content" / "Trip  
data".  
2. "CONTENT"  
Select the menu by tilting the knurled wheel  
on the steering wheel where applicable.  
Display in the instrument cluster  
Information on consumption and distance cov-  
ered can be displayed in the instrument cluster  
display.  
3. Select the desired setting using the knurled  
wheel on the steering wheel.  
148  
Displays  
CONTROLS  
▷
▷
"Since factory": the values since the  
time of the factory delivery are dis-  
played.  
"Since Individual ()": the values since  
the last manual reset are displayed. The  
values can be reset at any time.  
Resetting average values manually  
The average values of the trip data can be  
reset manually:  
▷
▷
▷
Current consumption, arrow 1.  
Average consumption, arrow 2.  
"since individ.".  
Distance traveled depending on the config-  
ured interval, arrow 3.  
Using the knurled wheel on the steering wheel:  
1. Display trip data on the instrument cluster.  
An icon is displayed when coasting.  
Total mileage, arrow 4.  
▷
2.  
Press and hold the knurled wheel on  
the steering wheel until the values reset.  
Current consumption  
To reset the average values via iDrive, go  
through the menu as follows: Apps menu /  
"Vehicle" / "System settings" / "Time period for  
trip data" / "Reset Individual".  
The current fuel consumption display allows  
you to check the current fuel consumption, e.g.,  
to drive economically and in an environmen-  
tally-friendly manner.  
The average values and counters are reset.  
Once the average values and counters have  
been reset, the following interval is automati-  
cally activated:  
Average consumption  
The average fuel consumption is displayed in  
the instrument cluster depending on how the  
intervals for displaying trip data are configured.  
"since individ.".  
Adjusting the display of the trip data  
The intervals for the display of the trip data  
in the instrument cluster and on the control  
display are adjustable.  
Assisted View  
Principle  
With Assisted View, information on the driver  
assistance systems can be displayed on the  
instrument cluster with a vehicle image.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "System settings" /  
"Time period for trip data" / "Values".  
Parking and maneuvering information is dis-  
played in the Assisted View whenever the  
parking assistance system is on.  
2. Select the desired setting:  
▷
"Since start of trip": the values are auto-  
matically reset approx. four hours after  
the vehicle has come to a standstill.  
▷
"Since last refuel": the values are au-  
tomatically reset after refueling with a  
larger quantity of fuel.  
149  
Displays  
CONTROLS  
Additional information:  
Safety information  
▷
▷
Cameras, refer to page 34.  
Radar sensors, refer to page 35.  
Warning  
The system cannot serve as a substitute for  
the driver’s personal judgment in assessing  
the traffic situation. Based on the limits of  
the system, it cannot independently react to  
all traffic situations. There is a risk of acci-  
dent, injury, and property damage. Adjust  
driving style to traffic conditions. Watch the  
surrounding traffic situation closely, be ready  
to take over steering and braking at any time,  
and actively intervene where appropriate.  
G-Meter  
Principle  
The G-Meter indicates the forces that are ap-  
plied in longitudinal and transverse direction  
on the vehicle occupants while driving.  
The display can be configured on the central  
display range of the instrument cluster.  
The values are automatically reset whenever  
you start a new drive.  
General  
Additional information:  
You can configure how Assisted View is dis-  
played on the central display range.  
Central display area, refer to page 147  
Additional information:  
Manually reseting G-Meter values  
1. Display the G-Meter on the instrument  
cluster.  
Central display area, refer to page 147  
Display  
2.  
Press and hold the knurled wheel on  
the steering wheel until the values reset.  
Date and time  
Various settings can be configured for display-  
ing the date and time.  
Depending on vehicle equipment and national-  
market version, the time zone can be set man-  
ually or automatically. Automatic time zone ad-  
justment automatically updates the time, the  
date, and the time zone as necessary.  
An example of active Driver Assistance: the  
indicator and warning lights for Distance Con-  
trol and Assisted Driving Mode are displayed.  
At the same time, the Distance Control is ani-  
mated in Assisted View.  
The date is set automatically based on the  
time zone.  
System limits  
The detection capability of the Assisted View  
system is limited.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "System settings" /  
"Time".  
Only objects that are detected by the system  
are taken into account.  
2. Select the desired setting.  
150  
Displays  
CONTROLS  
Safety information  
Fuel gauge  
NOTICE  
Principle  
With a range below 30 miles/50 km, the  
engine may no longer have sufficient fuel.  
Engine functions are not ensured anymore.  
There is a risk of property damage. Refuel  
promptly.  
The current fill level of the fuel tank is dis-  
played.  
General information  
Vehicle inclination may cause the display to  
vary.  
Additional information:  
Display  
Refueling, refer to page 326.  
The current range in the instru-  
ment cluster is displayed as a  
numerical value next to the fuel  
gauge.  
Display  
Next to the fuel gauge in the  
instrument cluster, an arrow be-  
side the fuel pump icon shows  
which side of the vehicle the fuel  
filler flap is on.  
General information  
With a low remaining range, a Check Control  
message is briefly displayed. A low remaining  
range means that engine functions cannot al-  
ways be ensured for sporty driving, e.g., when  
cornering at speed.  
The current range is displayed as numerical  
value.  
Indicator light in the instrument  
cluster  
The Check Control message appears  
continuously below a range of approx.  
30 miles/50 km.  
The yellow indicator light illuminates,  
once the fuel reserve is reached.  
Setting the units of  
measurement  
Range  
Depending on the national-market version, you  
can set the units of measurement for some  
values, for instance consumption, distances,  
and temperature.  
Principle  
The range in the instrument cluster indicates  
the distance that can still be covered with the  
current tank of fuel.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "System settings" /  
"Units".  
The estimated range with remaining fuel is  
permanently displayed on the instrument clus-  
ter.  
2. Select the desired setting.  
151  
Displays  
CONTROLS  
▷
▷
▷
Driving.  
Vehicle status  
Coasting mode: "Efficient coasting"  
"Charging battery"  
Principle  
With mild hybrid technology:  
In the Vehicle status menu, the statuses can  
be displayed or actions performed for several  
systems such as for Check Control.  
▷
Adaptive recuperation.  
Depending on the situation, additional in-  
formation on adaptive recuperation is dis-  
played.  
Displaying vehicle status  
To display the vehicle status, go through the  
menu as follows: Apps menu / "Vehicle" /  
"Vehicle status".  
▷
Efficient rolling with engine switched off.  
Additional information:  
▷
▷
Adaptive recuperation, refer to page 320.  
Coasting, refer to page 321.  
Overview  
Functional requirements  
Icon  
Description  
▷
Personal Mode or Efficient Mode drive  
mode must be selected.  
"Flat Tire Monitor": Status of  
the flat tire monitor, refer to  
page 351.  
▷
With Live Vehicle, the following settings  
must be selected: "Adaptive content"  
"Tire Pressure Monitor": status  
of the Tire Pressure Monitor,  
refer to page 343.  
Display  
"Engine oil level": electronic  
oil measurement, refer to  
page 365.  
"Check Control": displaying  
stored Check Control mes-  
sages, refer to page 137.  
"Service": display of the service  
notifications, refer to page 153.  
An example:  
The adaptive recuperation is active, arrow 1.  
The vehicle battery is charged when the vehi-  
cle decelerates, arrow 2.  
Current driving condition  
Principle  
The current driving condition is displayed dy-  
namically while driving in the Live Vehicle  
menu on the control display.  
Sport displays  
Principle  
The following states can be displayed:  
The sport displays in the Live Vehicle menu  
provide assistance for a sporty driving style.  
152  
Displays  
CONTROLS  
Functional requirements  
Entering appointment dates  
The dates for mandatory vehicle inspections  
can be entered.  
▷
Sport drive mode must be selected.  
▷
With Live Vehicle, the following settings  
must be selected: "Adaptive content"  
Make sure that the vehicle's date and time are  
set correctly.  
Display  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Vehicle status" /  
"Service" / "Vehicle inspection".  
The sport displays are displayed in the Live  
Vehicle menu on the control display.  
The following information is displayed:  
2. Select the desired setting.  
▷
▷
▷
▷
The torque.  
The power.  
The boost pressure.  
The engine oil temperature.  
Service  
Principle  
The service notifications indicate recom-  
mended maintenance work.  
General information  
After turning on, the next service appointment  
or the distance remaining until the next servic-  
ing is displayed briefly on the instrument clus-  
ter.  
A service advisor can read out the mainte-  
nance work from the vehicle key.  
Display  
More information may be displayed on the  
control display.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Vehicle status" /  
"Service".  
Maintenance work as well as possible le-  
gally mandated inspections are displayed.  
2. Select the desired entry to bring up more  
information.  
153  

Related Topics

CONTROLS
Dashboard Sensors of the vehicle Operating state of the vehicle BMW iDrive BMW Remote Software Upgrade Personal settings Opening and closing Seats, mirrors and steering wheel Transporting children safely Driving Light and view Safety Driving stability control systems Driver assistance systems Parking Driving comfort Climate control Interior equipment Storage compartments Cargo area

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot