2022-2025 BMW X1 SUV CONTROLS -> Opening and closing User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

CONTROLS -> Opening and closing for Your BMW X1 SUV Third Generation (2022-2025)

Opening and closing  
CONTROLS  
Opening and closing  
burns or chemical burns. There is a risk of  
injury or danger to life. Keep the vehicle key  
and batteries out of reach of children. Imme-  
diately seek medical help if there is any sus-  
picion that a battery or button cell battery has  
been swallowed or is located in any part of  
the body.  
Vehicle features and options  
This chapter describes model-specific equip-  
ment, systems, and functions that are currently  
available, or may become available in the fu-  
ture, even if they are not present in the vehicle.  
Additional information:  
Vehicle equipment, refer to page 8.  
Overview  
Vehicle key  
Principle  
Two vehicle keys are included in the scope of  
delivery, each containing an integrated key.  
Each vehicle key contains a replaceable bat-  
tery. If the vehicle key's battery is discharged,  
the vehicle key will not be detected. In this  
case, drive-ready state can be turned on by  
emergency detection of the vehicle key.  
Buttons on the vehicle key.  
Icon  
Meaning  
Depending on the equipment and national-  
market version, various settings are possible  
for the button functions.  
Unlock.  
A BMW ID or a driver profile with personal set-  
tings can be assigned to a vehicle key.  
Lock.  
Pre-conditioning, refer to page 282.  
To provide information on maintenance rec-  
ommendations, the service data is stored in  
the vehicle key.  
Open the cargo area.  
To prevent possible locking in of the vehicle  
key, take the vehicle key with you when exiting  
the vehicle.  
Panic mode.  
Pathway lighting, refer to page 160.  
Safety information  
Additional vehicle keys  
Additional vehicle keys are available from an  
authorized service center or another qualified  
service center or repair shop.  
Warning  
The vehicle key has a button cell battery.  
Batteries or button cell batteries can be swal-  
lowed and lead to serious or fatal injuries  
within two hours, for example due to internal  
69  
Opening and closing  
CONTROLS  
To replace the vehicle key battery, proceed as  
follows:  
Loss of vehicle keys  
A lost vehicle key can be disabled and re-  
placed by an authorized service center or an-  
other qualified service center or repair shop.  
1. Press and hold the button, arrow 1, and  
push the cover, arrow 2, forward, then re-  
move it from the side.  
If the lost vehicle key has an assigned BMW ID  
or driver profile, the connection to this vehicle  
key must be deleted. A new vehicle key can  
then be assigned to the BMW ID or driver pro-  
file.  
Replacing the battery  
NOTICE  
Improper batteries in a battery-operated de-  
vice can damage the device. There is a risk  
of property damage. Always replace the dis-  
charged battery with a battery with the same  
voltage, the same size and the same specifi-  
cation.  
2. Remove the battery housing from the vehi-  
cle key to the side.  
3. Remove the battery from the battery hous-  
ing.  
4. Insert a CR2032 3V battery with the posi-  
tive terminal facing down.  
70  
Opening and closing  
CONTROLS  
5. Insert the battery housing into the vehicle  
key.  
in it. Do not leave babies, toddlers or animals  
alone in the vehicle.  
Removing the integrated key  
1. Press and hold the button, arrow 1, and  
push the cover, arrow 2, forward and re-  
move it from the side.  
6. Insert the cover into the vehicle key.  
Have old batteries disposed of by an  
authorized service center or another  
qualified service center or repair shop,  
or take them to a collection point.  
2. Slide out the integrated key at the open  
side of the vehicle key.  
Batteries contain harmful chemicals. It  
is prohibited by law to dispose of bat-  
teries together with household waste.  
Integrated key  
Principle  
The integrated key is built into the vehicle key.  
If the electrical system malfunctions, the vehi-  
cle can be unlocked and locked manually using  
the integrated key.  
3. Remove the integrated key from the vehicle  
key.  
Depending on the national-market version, the  
integrated key will fit in the glove compart-  
ment.  
Safety information  
Warning  
For some national-market versions, unlock-  
ing from the inside is only possible with par-  
ticular knowledge.  
If persons or animals spend a lengthy time  
in the vehicle and are thereby exposed to ex-  
treme temperatures, there is a risk of injury  
or danger to life. Do not lock the vehicle from  
the outside when there are people or animals  
71  
Opening and closing  
CONTROLS  
3. Press the central locking button to unlock  
all doors.  
Unlocking the vehicle manually  
1. Pull and hold the driver's door handle out-  
ward with one hand.  
4. Exit the vehicle through the front passenger  
door.  
5. With the integrated key, close and lock the  
front passenger door using the side door  
lock.  
2. Unlock the door lock with the integrated key  
by turning it counterclockwise.  
6. Pull the door handles to make sure they are  
locked. If necessary, repeat the process.  
If vehicle is de-energized:  
1. With the integrated key, close and lock all  
doors, except the driver's door, using the  
side door lock.  
3. Pull out the vehicle key and release the  
door handle.  
4. Open the driver's door.  
5. Press the central locking button to unlock  
the other doors.  
With the vehicle de-energized: pull the door  
opener of the other doors from the inside.  
Locking the vehicle manually  
2. Pull and hold the driver's door handle out-  
ward with one hand.  
General information  
To avoid locking the vehicle key in the vehicle,  
do not place the vehicle key in the vehicle.  
Locking the vehicle  
1. Close all doors.  
2. Enter the vehicle on the front passenger's  
side and close the front passenger door.  
72  
Opening and closing  
CONTROLS  
3. Using the integrated key, lock the driver's  
door lock clockwise.  
Turning on the drive-ready state  
1. To turn on drive-ready state via emergency  
detection of the vehicle key, hold the back  
of the vehicle key to the marking on the  
steering column. Pay attention to the dis-  
play in the instrument cluster.  
4. Pull out the vehicle key and release the  
door handle.  
5. Close the driver's door.  
6. Pull the door handles to make sure they are  
locked. If necessary, repeat the process.  
2.  
▷
If the vehicle key is detected:  
Turn on drive-ready state within 10 sec-  
onds.  
Alarm system  
If the vehicle is unlocked with the integrated  
key via the door lock, the activated alarm sys-  
tem will be triggered when the door is opened.  
▷
If the vehicle key is not detected:  
Slightly change the position of the vehi-  
cle key and repeat the procedure.  
In this case, use the vehicle key emergency  
detection to switch off the alarm.  
Malfunction  
A Check Control message is displayed where  
applicable.  
If the doors are manually locked from the in-  
side, the alarm system is not activated.  
Vehicle key detection by the vehicle may mal-  
function under the following circumstances:  
Emergency detection of the vehicle  
key  
▷
▷
The battery of the vehicle key is discharged.  
Fault of the radio link from transmission  
towers or other equipment with high trans-  
mitting power.  
Principle  
If the vehicle key's battery is discharged, the  
vehicle key will not be detected. In this case,  
drive-ready state can be turned on by emer-  
gency detection of the vehicle key.  
▷
▷
Shielding of the vehicle key due to metal  
objects.  
Do not transport the vehicle key together  
with metal objects.  
Fault of the radio link from mobile phones  
or other electronic devices in direct proxim-  
ity to the vehicle key.  
Do not carry the vehicle key in close prox-  
imity to other electronic devices.  
73  
Opening and closing  
CONTROLS  
▷
▷
Fault of radio transmission by a charging  
process of mobile devices, for instance  
charging of a mobile phone.  
If persons or animals spend a lengthy time  
in the vehicle and are thereby exposed to ex-  
treme temperatures, there is a risk of injury  
or danger to life. Do not lock the vehicle from  
the outside when there are people or animals  
in it. Do not leave babies, toddlers or animals  
alone in the vehicle.  
The vehicle key is located in direct proximity  
of the wireless charging tray.  
Place the vehicle key in a different location.  
In the case of interference, the vehicle can also  
be unlocked and locked from the outside with  
the integrated key. Use the Emergency detec-  
tion of the vehicle key to turn on drive-ready  
state.  
Warning  
Unattended children or animals in the vehicle  
can cause the vehicle to move and endanger  
themselves and traffic, for example, due to  
the following actions:  
Access to vehicle interior  
▷
▷
▷
Establishing standby.  
Principle  
Releasing the parking brake.  
Opening and closing the doors or win-  
dows.  
The vehicle can be unlocked/locked as follows:  
▷
▷
▷
▷
▷
With the vehicle key.  
▷
▷
Engaging selector lever position N.  
Using vehicle equipment.  
Using the door handle.  
With the Key Card.  
There is a risk of accident, injury, and prop-  
erty damage. Do not leave children or ani-  
mals unattended in the vehicle. Take the ve-  
hicle key with you when exiting and lock the  
vehicle.  
With the BMW Digital Key.  
Hands-free unlocking/locking  
Safety information  
Warning  
Actions during unlocking  
Depending on the settings, the following func-  
tions are performed when unlocking the vehi-  
cle:  
People or animals in the vehicle can lock the  
doors from the inside and lock themselves in.  
In this case, the vehicle cannot be opened  
from the outside. There is a risk of injury.  
Take the vehicle key with you so that the ve-  
hicle can be opened from the outside.  
▷
Only the driver's door and the fuel filler flap  
will be unlocked or all access to the vehicle  
will be unlocked.  
▷
▷
The unlocking of the vehicle can be con-  
firmed with a light signal or a sound signal.  
Warning  
The welcome light can be turned on when  
the vehicle is being unlocked.  
For some national-market versions, unlock-  
ing from the inside is only possible with par-  
ticular knowledge.  
In addition, the following functions are exe-  
cuted:  
74  
Opening and closing  
CONTROLS  
▷
If a BMW ID or a driver profile was assigned  
to the vehicle key, this BMW ID or driver  
profile will be activated.  
With the vehicle key  
Unlocking the vehicle  
▷
▷
The interior lights are switched on, unless  
they were manually switched off.  
To unlock the vehicle using the vehicle  
key, press the unlock button on the ve-  
hicle key.  
Depending on vehicle equipment, folded-in  
exterior mirrors are folded out.  
If only the driver's door and fuel filler flap have  
been unlocked due to the settings in place,  
press the button on the vehicle key again to  
unlock the other vehicle access points.  
If the exterior mirrors were folded in using  
the button inside the vehicle, they will not  
fold out when the vehicle is unlocked.  
▷
▷
Anti-theft protection is switched off.  
The alarm system is switched off.  
The lighting functions may depend on the am-  
bient brightness.  
Additional information:  
Locking the vehicle  
1. To lock the vehicle using the vehicle key,  
close the driver’s door.  
▷
▷
▷
▷
Settings, refer to page 87.  
Welcome lights, refer to page 159.  
BMW ID, refer to page 62.  
Driver profiles, refer to page 66.  
2.  
Press the lock button on the vehicle  
key.  
Actions during locking  
Depending on the settings, the following func-  
tions are performed when locking the vehicle:  
On the door handle  
▷
The locking of the vehicle can be confirmed  
with a light signal or a sound signal.  
Principle  
The vehicle can be accessed without using the  
vehicle key.  
▷
Depending on vehicle equipment, the exte-  
rior mirrors can be folded in automatically  
when locking. The exterior mirrors are not  
folded in when the hazard warning flashers  
are switched on.  
The vehicle key is automatically detected near  
the vehicle.  
General information  
The function is available with Comfort Access.  
The following functions are executed:  
▷
All doors, the cargo area, and the fuel filler  
flap are locked.  
Depending on national-market version, the ve-  
hicle can also be unlocked and locked via the  
door handle using a compatible smartphone  
and digital key.  
▷
Anti-theft protection is switched on. This  
prevents the doors from being unlocked us-  
ing the lock buttons or the door openers.  
Additional information:  
▷
The alarm system is switched on.  
BMW Digital Key, refer to page 83.  
If the drive-ready state is still turned on when  
you lock the vehicle, the vehicle horn will honk  
twice. In this case, drive-ready state must be  
turned off using the Start/Stop button.  
Functional requirements  
To get inside the vehicle using the door han-  
dle, the following functional requirements must  
be met:  
Additional information:  
Settings, refer to page 87.  
75  
Opening and closing  
CONTROLS  
▷
▷
Carry the vehicle key with you, e.g., in your  
pants pocket.  
hold it there without reaching into the re-  
cessed grip.  
Bluetooth must be activated on the smart-  
phone to unlock and lock using the digital  
key.  
▷
▷
To lock the vehicle, the vehicle key must be  
outside of the vehicle near the doors.  
After locking, approx. 2 seconds must  
elapse before unlocking is possible.  
Unlocking the vehicle using the door  
handle  
Malfunction  
Wet or snowy conditions may disrupt the lock-  
ing request detection on the door handles.  
In the case of a malfunction, unlock and lock  
the vehicle using the buttons of the vehicle key  
or use the integrated key.  
Touchless unlocking/locking of the  
vehicle  
To unlock the vehicle using the door handle,  
reach into the recessed grip on one of the front  
doors.  
Principle  
The vehicle will be unlocked when an author-  
ized vehicle key is detected in the unlocking  
zone.  
Locking the vehicle with the door  
handle  
1. To lock the vehicle using the door handle,  
close the driver’s door.  
The unlocking zone is located within a radius  
of approx. 5 ft/1.50 m around the side and rear  
of the vehicle.  
The vehicle will be locked when the vehicle key  
leaves the locking zone.  
2. Carry the vehicle key with you.  
Touch the grooved surface on the closed  
front door handle for approx. 1 second and  
The locking zone is located within a radius of  
approx. 9 ft/3 m around the side and rear of  
the vehicle.  
Automatic unlocking and locking must be acti-  
vated in the settings.  
General information  
The function is available with Comfort Access.  
Depending on the national-market version,  
touchless unlocking and locking is also possi-  
ble for compatible smartphones with a digital  
76  
Opening and closing  
CONTROLS  
key. Enable Bluetooth on your smartphone to  
do so.  
With the Key Card  
If the vehicle key is located in the unlocking  
zone for an extended period of time without  
movement, the vehicle will be locked automati-  
cally.  
Principle  
The Key Card is a chip card on which the digi-  
tal key is installed. The Key Card can be used  
to unlock and lock the vehicle.  
If someone is detected on a seat while locking  
the vehicle, the following restrictions apply:  
Additional information:  
Key Card, refer to page 82.  
▷
The vehicle will be locked but not secured  
against theft.  
General information  
The Key Card is available with Comfort Access.  
▷
The fuel filler flap remains unlocked.  
Additional information:  
Unlocking/locking the vehicle with the  
Key Card  
BMW Digital Key, refer to page 83.  
Actions during unlocking  
If the settings specify that only the driver's  
door and the fuel filler flap will be unlocked,  
note the following:  
The driver's door and fuel filler flap will only  
unlock when the driver is within the driver's  
door unlocking zone.  
Additional information:  
Settings, refer to page 87.  
Hold the activated Key Card directly at the cen-  
ter of the driver's door handle.  
Functional requirements  
To unlock/lock the vehicle hands-free, the fol-  
lowing functional requirements must be met:  
When locking the vehicle with the Key Card,  
make sure that all doors and the cargo area  
are closed.  
▷
Carry the vehicle key with you, e.g., in your  
pants pocket.  
If the Key Card is not detected, slightly change  
the position of the Key Card and repeat the  
procedure.  
▷
Bluetooth must be activated on the smart-  
phone for contactless unlocking and locking  
using the digital key.  
With the BMW Digital Key  
▷
Automatic unlocking and locking must be  
activated in the settings.  
Principle  
▷
▷
The drive-ready state must be turned off.  
Depending on vehicle equipment and national-  
market version, a digital key can be installed  
on a compatible smartphone and used to un-  
lock and lock the vehicle.  
If the vehicle has been in the idle state for  
several days, contactless unlocking/locking  
will only be available after the vehicle has  
been driven.  
Additional information:  
Additional information:  
BMW Digital Key, refer to page 83.  
Settings, refer to page 87.  
77  
Opening and closing  
CONTROLS  
▷
▷
Inside the vehicle.  
Unlocking/locking the vehicle with the  
BMW Digital Key  
Hands-free opening/closing.  
General information  
The cargo area will be opened to the config-  
ured opening height.  
Safety information  
Warning  
Body parts can be jammed when operating  
the tailgate. There is a risk of injury. Make  
sure that the travel path of the tailgate is  
clear during opening and closing.  
Hold the smartphone NFC antenna directly at  
the center of the driver's door handle. The po-  
sition of the near field communication antenna  
depends on the smartphone model.  
When locking the vehicle with the smartphone,  
make sure that all doors and the cargo area  
are closed.  
Warning  
The tailgate swings back and up when it  
opens. There is a risk of injury and risk of  
property damage. Make sure that the travel  
path of the tailgate is clear during opening  
and closing.  
Frequently Asked Questions  
What precautions can be taken to be able to  
open a vehicle, despite accidentally locking in  
the vehicle key?  
▷
The My BMW App Remote Services include  
options to lock and unlock a vehicle, among  
other things.  
Warning  
Sharp-edged or pointed objects can hit the  
windows and heating elements while driving.  
There is a risk of injury or risk of property  
damage. Cover the edges and ensure that  
pointed objects do not hit the windows.  
This requires an active BMW Connected-  
Drive contract, and the My BMW App must  
be installed on your smartphone.  
▷
Unlocking the vehicle can be requested via  
the BMW ConnectedDrive Call Center.  
An active BMW ConnectedDrive contract is  
required.  
With the vehicle key  
General information  
To avoid locking the vehicle key in the vehicle,  
do not place the vehicle key in the cargo area.  
Access to the cargo area  
Principle  
Depending on vehicle equipment and national-  
market version, the following settings can be  
changed:  
The cargo area can be opened/closed as fol-  
lows:  
▷
▷
With the vehicle key.  
In the cargo area.  
78  
Opening and closing  
CONTROLS  
▷
▷
Unlocking the cargo area with the vehicle  
key also unlocks the doors.  
Functional requirements  
To access the cargo area using the cargo area,  
the following functional requirements must be  
met:  
Before unlocking the cargo area with the  
vehicle key, first unlock the vehicle.  
▷
Carry the vehicle key with you, e.g., in your  
pants pocket.  
Functional requirements  
To access the cargo area using the vehicle key,  
the following functional requirements must be  
met:  
▷
Bluetooth must be activated on the smart-  
phone to detect the digital key.  
▷
To open the cargo area with the vehicle  
key, the trailer power socket must not be  
occupied.  
Opening the cargo area  
▷
▷
Selector lever position P must be engaged  
to open the cargo area with the vehicle key.  
You must enable the setting for opening  
with the vehicle key.  
Additional information:  
Settings, refer to page 87.  
The trunk can be opened as follows:  
Opening the cargo area  
▷
Unlock the vehicle, then press the button on  
the trunk.  
On the vehicle key, press and hold the  
button for opening/closing the cargo  
area for approx. 1 second.  
▷
With Comfort Access: Carry the vehicle key  
with you and press the button on the trunk.  
Locked doors are not unlocked.  
On the cargo area  
Closing the cargo area  
General information  
With Comfort Access, the cargo area can be  
accessed without activating the vehicle key.  
The key is automatically detected near the ve-  
hicle.  
Depending on the national-market version,  
compatible smartphones with a digital key are  
also detected automatically. In this case, the  
cargo area can be opened with a smartphone.  
Additional information:  
The cargo area can be closed as follows:  
BMW Digital Key, refer to page 83.  
▷
On the cargo area, press the open/  
close button.  
▷
On the cargo area, press the lock  
button.  
79  
Opening and closing  
CONTROLS  
The vehicle is locked after closing the cargo  
area. To do so, the driver's door must be  
closed and the vehicle key must be outside  
of the vehicle near the cargo area.  
▷
▷
By pressing the button on the inside of the  
cargo area. Pressing it again closes the  
cargo area again.  
By pressing the button on the vehicle key.  
▷
Pull the tailgate down slightly. The tailgate  
closes automatically.  
Pressing the button again continues the  
opening process.  
▷
By pressing or pulling the button in the  
driver's door. Pressing again continues the  
opening procedure.  
In the interior  
Functional requirements  
To open the cargo area using the button in-  
side, the trailer power socket must not be oc-  
cupied.  
Interruption of the closing procedure  
The closing process stops in the following sit-  
uations:  
The vehicle key or digital key must be located  
inside the vehicle in order to close the cargo  
area using the button in the vehicle interior.  
▷
If the vehicle drives off with a jerky move-  
ment.  
▷
By pressing the button on the outside of  
the cargo area. Pressing it again opens the  
cargo area again.  
When the vehicle is locked, selector lever po-  
sition P must be engaged before the tailgate  
can be opened using the button in the vehicle  
interior.  
▷
▷
▷
By pressing the button on the inside of  
the cargo area. Pressing it again opens the  
cargo area again.  
Opening the cargo area  
By pressing the button on the vehicle key.  
Pressing it again opens the cargo area  
again.  
To open the cargo area, press the  
open/close button for the cargo area  
on the driver's door.  
By releasing the button in the driver's door.  
Pulling again and holding continues the  
closing motion.  
Closing the cargo area  
To open the cargo area, pull and hold  
the open/close button for the cargo  
area on the driver's door.  
Touchless opening and closing of  
the cargo area  
An acoustic signal sounds before the cargo  
area is closed.  
Principle  
Touchless opening and closing of the cargo  
area is possible when carrying the vehicle key  
on your person.  
Interruption of the opening  
procedure  
The opening process stops in the following sit-  
uations:  
Sensors detect specific foot movements near  
the center of the trunk, and the trunk opens or  
closes.  
▷
▷
When the vehicle starts moving.  
General information  
Function availability depends on vehicle equip-  
ment and national-market version.  
By pressing the button on the outside of  
the cargo area. Pressing it again closes the  
cargo area again.  
80  
Opening and closing  
CONTROLS  
If the vehicle key is within the sensor range, the  
cargo area may open or close inadvertently if  
you unintentionally move your foot or if a foot  
movement is detected.  
Hands-free opening of the trunk  
1. To open the trunk hands-free, walk behind  
the vehicle with the vehicle key, holding it  
in the middle at the rear of the vehicle, ap-  
proximately one arm’s length away.  
The sensor has an approximate range of  
5 ft/1.50 m extending from the rear area.  
2. Wave a foot under the vehicle in the driv-  
ing direction and immediately pull it back.  
With these movements, the leg must pass  
through the ranges of both sensors.  
If contactless opening is used for the cargo  
area, the locked doors will not be unlocked.  
Depending on national-market version, con-  
tactless opening of the cargo area is also pos-  
sible for compatible smartphones with a Digital  
Key.  
Additional information:  
BMW Digital Key, refer to page 83.  
Safety information  
Warning  
Before the cargo area opens, the hazard warn-  
ing system flashes.  
With hands-free opening of the cargo area,  
there may be unintentional contact with vehi-  
cle parts, e.g., hot exhaust system. There is  
a risk of injury. When moving your foot, make  
sure you have a firm stance and do not touch  
the vehicle.  
Moving a foot again will stop the opening proc-  
cedure. The subsequent foot movement will  
close the cargo area again.  
Hands-free closing of the trunk  
To close the trunk hands-free, move your foot,  
while carrying the vehicle key on you, in the  
same way as for opening the trunk.  
Functional requirements  
To open/close the trunk hands-free, the fol-  
lowing functional requirements must be met:  
The hazard warning system flashes and an  
acoustic signal sounds.  
▷
▷
Selector lever position P must be engaged.  
Moving a foot again will stop the closing proc-  
ess. The subsequent foot movement will open  
the cargo area again.  
Contactless opening and closing of the  
trunk must be activated in the settings.  
▷
Bluetooth must be activated on the smart-  
phone to open and close the cargo area  
contactlessly using the Digital Key.  
System limits  
The detection of the foot movement may be  
limited due to the following external conditions:  
Depending on vehicle equipment:  
No trailer hitches should be mounted.  
▷
▷
▷
Ice, snow or slush on the rear of the vehicle.  
Dirt or road salt on the rear of the vehicle.  
Additional information:  
Settings, refer to page 87.  
Movement in range of the sensors may cause  
the trunk to open unintentionally, e.g., due  
to running water when cleaning the vehicle  
81  
Opening and closing  
CONTROLS  
or from heavy rainfall, or due to the moving  
brushes in a car wash. To prevent such un-  
intended opening of the cargo area in such  
cases, keep the vehicle key at a sufficient dis-  
tance from the rear of the vehicle.  
vehicle. Always take the vehicle key with you to  
a service appointment.  
Safety information  
Depending on vehicle equipment: Objects  
mounted on a trailer hitch cannot be detected  
if the trailer power socket is not plugged in.  
NOTICE  
If the Key Card and a mobile device are in the  
wireless charging tray at the same time, the  
Key Card could become damaged. There is  
a risk of property damage. Do not place the  
Key Card in the wireless charging tray at the  
same time as a mobile device.  
Malfunction  
Warning  
With manual operation of a blocked tailgate,  
it can release itself unexpectedly from the  
blocking. There is a risk of injury and risk  
of property damage. Do not operate the tail-  
gate manually if it is blocked. Have the vehi-  
cle checked by an authorized service center  
or another qualified service center or repair  
shop.  
Activating/deactivating Key Card in  
the vehicle  
General information  
When the BMW Digital Key is activated for the  
vehicle, a digital key can be used instead of the  
vehicle key.  
In the event of an electrical malfunction in the  
automatic tailgate, operate the unlocked tail-  
gate slowly with a smooth motion by hand.  
A deactivated Key Card remains in the list of  
paired digital keys.  
To close the tailgate fully, press down lightly  
only. Closing occurs automatically.  
Functional requirement  
A vehicle key must be located in the vehicle to  
activate and deactivate the Key Card.  
Key Card  
Activating Key Card  
Principle  
The Key Card allows the vehicle to be unlocked  
and locked, as well as started.  
A digital key that has already been paired with  
the vehicle is installed on the Key Card. The  
digital key must be activated via iDrive.  
General information  
Key Card availability depends on vehicle equip-  
ment and national-market version.  
1. To activate the Key Card, place the Key  
Card in the center of the tray on the cen-  
Before leaving the vehicle, deactivate the Key  
Card or take the Key Card with you because  
the active Key Card can be used to start the  
82  
Opening and closing  
CONTROLS  
ter console and slide it down behind the  
holder.  
phone tray and the Key Card, e.g., a wallet or  
smartphone case.  
2. Follow the instructions on the control dis-  
play.  
BMW Digital Key  
Deactivating Key Card  
Principle  
To deactivate the Key Card, go through the  
menu as follows: Apps menu / "Vehicle" /  
"Vehicle key" / "Key Card" / "Deactivate Key  
Card".  
BMW Digital Key lets you lock and unlock and  
start your vehicle using a digital key.  
BMW Digital Key can be used with a compat-  
ible smartphone or other compatible mobile  
devices.  
A deactivated Key Card remains in the list of  
paired digital keys.  
To unlock and start a vehicle with a compatible  
smartphone, this function must be offered by  
the smartphone manufacturer. The My BMW  
app can be used to check if the smartphone  
and vehicle are compatible and which func-  
tions are supported.  
Unlocking and locking the vehicle  
The vehicle can be unlocked and locked with  
the activated Key Card.  
Additional information:  
Access to the vehicle interior, refer to page 74.  
Each vehicle can be provided with a main dig-  
ital key. Additional digital keys can be shared  
and then deleted.  
Turning on drive-ready state with  
the Key Card  
General information  
BMW Digital Key availability and functionality  
depend on vehicle equipment and national-  
market version.  
A BMW ID or a driver profile with individual  
settings can be assigned to a digital key.  
When using a smartphone as a digital key, it is  
helpful to carry the deactivated Key Card in the  
vehicle. In situations where the vehicle is to be  
given to another person, they can be given the  
Key Card instead of the smartphone. To do so,  
the Key Card must be activated via iDrive.  
1. To turn on drive-ready state using the Key  
Card, place the activated Key Card in the  
center of the tray on the center console and  
slide it down behind the holder.  
Always take the vehicle key with you to a serv-  
ice appointment.  
2. Press the Start/Stop button.  
After drive-ready state is switched on, the Key  
Card can be removed from the tray.  
Additional information:  
▷
▷
▷
BMW ID, refer to page 62.  
Driver profiles, refer to page 66.  
Key Card, refer to page 82.  
Malfunction  
The vehicle may not be able to detect the Key  
Card if there are objects between the smart-  
More information is available online:  
 
83  
Opening and closing  
CONTROLS  
As soon as a digital key is shared with another  
Functional requirements  
The following functional requirements must be  
met for BMW Digital Key:  
person, the person will receive an invitation.  
When the invitation is accepted, the digital key  
on the recipient's smartphone will be activated.  
▷
▷
▷
The smartphone is compatible with BMW  
Digital Key  
Limiting the range of functions  
The vehicle is linked with the Connected-  
Drive account of the vehicle owner.  
Certain functions of the digital key can be lim-  
ited before handing it over. For example, you  
can disable restrictions for driving stability con-  
trol systems and reduce the engine power be-  
fore giving your digital key to a novice driver.  
For more information, refer to the Connected-  
Drive customer portal and the My BMW App.  
The rechargeable battery of the smart-  
phone has a sufficient charge. The neces-  
sary minimum charge of the rechargeable  
battery depends on the smartphone.  
▷
Bluetooth must be activated on the smart-  
phone for contactless unlocking and locking  
using the digital key.  
Authentication  
Depending on the recipient’s smartphone  
model, an authentication may be required for  
security and safety reasons.  
Enabling the main digital key  
Vehicle owner's smartphone is enabled as a  
main digital key in the vehicle. The vehicle  
owner must prove his authorization for the ve-  
hicle for this purpose.  
An authorized vehicle key, the main digital key  
or another method may be used for authenti-  
cation. Follow the corresponding instructions  
on the smartphone or the control display.  
Proof of authorization can be started via the  
My BMW App or using the activation code in  
the corresponding smartphone function, e.g.,  
the Wallet app.  
Deleting digital keys  
General information  
Deleted digital keys will be removed from the  
list of enabled digital keys.  
Both vehicle keys must be located in the vehi-  
cle to be enabled.  
To enable, follow the instructions given on the  
Digital Key menu, BMW app, or control display.  
Deleted digital keys cannot be restored.  
Deleting the main digital key  
Sharing digital keys  
The main digital key can be deleted from the  
smartphone or via iDrive.  
General information  
Digital Key allows the sharing of digital keys  
with other people. This option is available via  
the smartphone that is enabled as main digital  
key. This function must be supported by the  
smartphone.  
The deletion of the main digital key is com-  
pleted immediately.  
Deleting a shared key  
Shared keys can be deleted via the smart-  
phone with the main digital key, via the smart-  
phone with a shared key or via iDrive.  
Forwarding authorization  
To share the digital key, select the correspond-  
ing function on the smartphone, for instance in  
the Wallet app.  
The deletion via the smartphone using the  
main digital key will not be performed until the  
84  
Opening and closing  
CONTROLS  
vehicle is used with a key other than the key to  
be deleted.  
BMW Digital Key availability and function-  
ality depend on vehicle equipment and na-  
tional-market version.  
The deletion via the smartphone with a shared  
key or via iDrive is executed immediately.  
Additional information:  
Access to the vehicle interior, refer to page 74.  
Deletion via iDrive  
To delete a digital key via iDrive, there must be  
an authorized vehicle key in the vehicle, or the  
master Digital Key must be in the smartphone  
tray.  
Turning on drive-ready state with  
the BMW Digital Key  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Vehicle key" / "Digital  
Key".  
2. If necessary, select the digital key.  
3. "Delete key"  
Resetting the function  
To reset the BMW Digital Key function, an au-  
thorized vehicle key must be located in the ve-  
hicle.  
1. To turn on drive-ready state using the  
BMW Digital Key, place the smartphone in  
the center of the tray on the center console  
and slide it down behind the holder.  
When resetting the BMW Digital Key function,  
all digital keys including the main digital key  
will be deleted. The Key Card's digital key is  
retained and deactivated.  
Ensure that the display is facing up.  
2. Press the Start/Stop button to turn on  
drive-ready state.  
It may be necessary to open the holder when  
inserting/removing the smartphone, depend-  
ing on its thickness.  
After the reset, the vehicle can no longer be  
unlocked, locked or started with a digital key.  
The main digital key must be enabled again to  
be able to use BMW Digital Key again.  
With Comfort Access, it is sufficient, depending  
on the country, for the smartphone with Blue-  
tooth enabled to be located inside the vehicle.  
Press the Start/Stop button to turn on drive-  
ready state.  
To reactivate the main digital key, go through  
the menu as follows: Apps menu / "Vehicle" /  
"Vehicle key" / "Digital Key" / "Reset function".  
Unlocking and locking the vehicle  
The vehicle can be unlocked and locked as fol-  
lows:  
Sale of the smartphone  
Delete all digital keys on the smartphone prior  
to selling the smartphone. This ensures that  
the smartphone can no longer be used for the  
vehicle.  
▷
▷
Using the door handle.  
With Comfort Access: depending on the na-  
tional-market version, the vehicle can be  
locked and unlocked with no-touch activa-  
tion.  
Changing smartphones  
To use a new smartphone as a master Digital  
Key, activate the new smartphone according to  
the instructions for the master Digital Key. The  
85  
Opening and closing  
CONTROLS  
previous master key is deleted when the new  
smartphone is activated.  
Buttons for the central  
locking system  
Sale of the vehicle  
Principle  
Prior to selling a vehicle, reset the Digital  
Key function or remove the vehicle from the  
ConnectedDrive account of the current vehicle  
owner.  
The vehicle can be locked/unlocked from the  
inside using the buttons for the central locking  
system.  
When the vehicle is removed from the Con-  
nectedDrive account, all digital keys for the ve-  
hicle will be deleted. The Key Card's digital key  
is retained and deactivated.  
The vehicle is automatically locked when driv-  
ing off.  
In the event of a severe accident, the vehicle  
is automatically unlocked. The hazard warning  
system and interior lights are illuminated.  
System limits  
With a digital key, the alarm system's interior  
motion sensor and tilt alarm sensor can only  
be deactivated using the control display.  
Overview  
Additional information:  
Alarm system, refer to page 88.  
Malfunction  
Your Digital Key may not be detected by the  
vehicle under the following circumstances:  
▷
▷
▷
▷
The smartphone is shielded from the sen-  
sors in the vehicle by a smartphone cover  
that is not suitable.  
The central locking buttons are located on the  
front door.  
There is an object, e.g., chip card or Key  
Card, between the smartphone and smart-  
phone cover.  
The lock button.  
The unlock button.  
The connection has been interrupted by a  
transmission tower or other device with a  
high transmitting power.  
The smartphone is shielded by a building or  
metallic object.  
Locking the vehicle from inside  
To lock the vehicle from the inside,  
press the lock button on the front door  
when the front doors are closed.  
The fuel filler flap remains unlocked.  
The vehicle is not secured against theft when  
locking.  
86  
Opening and closing  
CONTROLS  
Touchless unlocking/locking  
Unlocking the vehicle from inside  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Doors and windows" /  
"Lock" / "Lock/unlock".  
To unlock the vehicle from the inside,  
press the unlock button on the front  
door.  
2. Select the desired setting:  
▷
▷
"Unlock when approaching"  
"Lock when walking away".  
Opening the door  
When the vehicle is locked, doors can be  
opened as follows:  
Enabling this setting also activates au-  
tomatic folding of the mirrors. Automatic  
folding of the mirrors can be deactivated  
again in the corresponding menu.  
▷
On the front door, press the unlock  
button to unlock the doors together.  
Pull the door opener above the arm-  
rest.  
Automatic unlocking  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Doors and windows" /  
"Lock" / "Lock/unlock".  
▷
▷
Front doors: Pull the door opener on the  
door to be opened. The other doors remain  
locked.  
Rear doors: Pull the door opener on the  
door to be opened twice: The first time un-  
locks the door, the second time opens it.  
The other doors remain locked.  
2. Select the desired setting:  
▷
▷
"Unlock doors at end of trip"  
"Unlock doors when in P".  
If locked, the vehicle unlocks automatically  
when drive-ready state is turned off or selector  
lever position P is engaged.  
Settings  
Automatic locking  
General information  
Go through the menu as follows: Apps menu /  
"Vehicle" / "Doors and windows" / "Lock" /  
"Lock/unlock" / "Lock after a short time".  
Depending on the equipment and national-  
market version, various settings for opening  
and closing are possible.  
The vehicle locks automatically after a short  
period of time if no door is opened after un-  
locking.  
Unlocking and locking  
Doors  
Confirmation signals from the vehicle  
1. Go through the menu as follows:  
Apps menu / "Vehicle" / "Doors and  
windows"/"Lock" / "Lock/unlock".  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Doors and windows" /  
"Lock" / "Lock/unlock" / "Unlock".  
2. Select the desired setting:  
2. Select the desired setting:  
▷
"Driver's door only"  
▷
▷
▷
"Flash when unlocking"  
Only the driver's door and fuel filler flap  
are unlocked. Pressing again unlocks  
the entire vehicle.  
Unlocking is confirmed by two flashes.  
"Flash when locking"  
▷
"All doors"  
Locking is confirmed by one flash.  
With alarm system:  
The entire vehicle is unlocked.  
87  
Opening and closing  
CONTROLS  
"Sound on lock/unlock"  
When adjusting the opening height, make sure  
the clearance above the tailgate is at least  
4 in/10 cm.  
Unlocking is confirmed with two sound  
signals, locking is confirmed with one  
sound signal.  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Doors and windows" /  
"Tailgate" / "Opening height"  
Folding mirrors in automatically  
Automatic folding of the side mirrors can be  
adjusted via iDrive.  
2. Monitor the tailgate and set the desired  
opening height.  
Go through the menu as follows: Apps menu /  
"Vehicle" / "Doors and windows" / "Lock" /  
"Lock/unlock" / "Fold mirrors on lock/unlock".  
Opening/closing the cargo area with  
no-touch activation  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Doors and windows" /  
"Tailgate"  
Cargo area  
Cargo area button on vehicle key  
It is possible to choose where to assign the  
cargo area button on the vehicle key.  
2. Select the desired setting:  
▷
▷
"Open with foot movement"  
"Close with foot movement"  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Doors and windows" /  
"Tailgate" / "VEHICLE KEY" / "Tailgate  
button".  
Window  
Opening windows automatically  
1. Go through the menu as follows: Apps  
menu / "Vehicle" / "Doors and windows"  
2. Select the desired setting:  
▷
"Tailgate"  
Depending on the equipment, the cargo  
area will be unlocked or opened.  
2. Select the desired setting.  
If this setting is enabled, the driver’s window  
opens automatically as soon as the vehicle  
reaches the saved location.  
▷
"Tailgate and door(s)"  
Depending on the equipment, the cargo  
area will be unlocked or opened and the  
doors are unlocked.  
Alarm system  
▷
▷
"Tailgate will only open if vehicle is  
already unlocked"  
Principle  
The vehicle must be unlocked before  
the cargo area can be operated with the  
vehicle key.  
The alarm system issues a visual and acoustic  
signal when someone attempts to open the  
locked vehicle incorrectly.  
"Lock tailgate button"  
Operating the cargo area with the vehi-  
cle key is disabled.  
General information  
When the vehicle is locked, the vehicle alarm  
system reacts to the following changes:  
Adjusting the opening height  
You can set how far the tailgate can be  
opened.  
88  
Opening and closing  
CONTROLS  
▷
If a door, the hood, or the cargo area is  
opened.  
Panic mode  
You can trigger the alarm system if you find  
yourself in a dangerous situation.  
▷
▷
If movement is detected inside the vehicle.  
If the vehicle has a different tilt, e.g., due  
to an attempt to steal a wheel or when tow-  
ing.  
▷
Press the button on the vehicle key  
and hold for at least 3 seconds.  
▷
Briefly press the button on the vehi-  
cle key three times in succession.  
▷
▷
▷
If the battery voltage is interrupted.  
If the diagnostic socket is used improperly.  
To switch off the alarm: press any button.  
If the vehicle is locked when a device is  
connected to the diagnostic socket.  
Indicator light on the interior mirror  
The indicator light on the interior mirror shows  
the status of the alarm system:  
The alarm system signals these changes visu-  
ally and acoustically:  
▷
Acoustic alarm:  
Depending on local regulations, the acous-  
tic alarm may be suppressed.  
▷
Optical alarm:  
By flashing of the hazard warning system  
and headlights, where required.  
Do not modify the system to ensure function of  
the alarm system.  
Turning the alarm system on/off  
The alarm system is activated or deactivated  
as soon as the vehicle is locked or unlocked.  
▷
▷
The indicator light flashes briefly every  
2 seconds:  
The alarm system is switched on.  
The alarm system does not turn on if the vehi-  
cle is locked manually from the inside.  
The indicator light flashes for approx.  
10 seconds, then flashes briefly every  
2 seconds:  
Opening the doors with the alarm  
system switched on  
The alarm system is triggered when a door  
is opened if the door was unlocked using the  
integrated key in the door lock.  
The interior motion sensor and tilt alarm  
sensor are not activated because the  
doors, hood, or tailgate are not closed cor-  
rectly. Correctly closed access points are  
secured.  
The interior motion sensor and tilt alarm  
sensor will turn on when all open access  
points are closed.  
Opening the cargo area with the  
alarm system switched on  
The cargo area can be opened even when the  
alarm system is switched on.  
▷
▷
The indicator light flashes even though all  
access points have been closed:  
Alarm system error.  
After closing the cargo area, the cargo area will  
be locked and monitored again. The hazard  
warning system flashes once during closing.  
The indicator light goes out after unlocking:  
89  
Opening and closing  
CONTROLS  
The vehicle has not been tampered with.  
Switching off the tilt alarm sensor and  
interior motion sensor  
The tilt alarm sensor and interior motion sen-  
sor can be turned off as follows:  
▷
The indicator light flashes after unlocking  
until drive-ready state is switched on, but  
no longer than approx. 5 minutes:  
The alarm has been triggered.  
▷
As soon as the vehicle is locked,  
press the lock button on the vehicle  
key within 30 seconds.  
Tilt alarm sensor  
The tilt alarm sensor is part of the alarm sys-  
tem and monitors the vehicle's tilt.  
The indicator light illuminates for approx.  
2 seconds and then continues to flash.  
▷
After turning off the standby state, an  
option to turn off the interior motion sensor  
and the tilt alarm sensor will be displayed  
on the control display.  
The alarm system responds in situations such  
as attempts to steal a wheel or when the vehi-  
cle is towed.  
The tilt alarm sensor and interior motion sen-  
sor are deactivated until the vehicle is locked  
again.  
Interior motion sensor  
The interior motion sensor is part of the alarm  
system and monitors the vehicle interior.  
The alarm system triggers when movement is  
detected inside the vehicle.  
Ending the alarm  
To stop the alarm, unlock the vehicle.  
The windows must be closed for the system to  
function properly.  
If the vehicle is unlocked with the integrated  
key, the drive-ready state must subsequently  
be turned on via the emergency detection of  
the vehicle key.  
Avoiding unintentional alarms  
General information  
The tilt alarm sensor and interior motion sen-  
sor can trigger an alarm, although no unau-  
thorized action occurred.  
Window  
Principle  
The windows can be operated as follows:  
An unintentional alarm can be triggered in the  
following situations:  
▷
▷
▷
With the vehicle key.  
▷
▷
▷
In car washes.  
Using the door handle.  
In duplex garages.  
Using the switches inside the vehicle.  
During transport on trains carrying vehicles,  
at sea or on a trailer.  
Safety information  
▷
▷
With animals in the vehicle.  
When the vehicle is locked after start of re-  
fueling.  
Warning  
When operating the windows, body parts and  
objects can be jammed. There is a risk of in-  
jury and risk of property damage. Make sure  
that the travel path of the windows is clear  
while opening and closing.  
The tilt alarm sensor and the interior motion  
sensor can be switched off in such situations.  
90  
Opening and closing  
CONTROLS  
Functional requirements  
With the vehicle key  
To close the windows using the door handle,  
the following functional requirements must be  
met:  
Opening windows with the vehicle key  
To open the windows with the vehicle  
key, unlock the vehicle, then press and  
hold the unlock button on the vehicle  
key.  
▷
Carry the vehicle key with you, e.g., in your  
pants pocket.  
▷
Bluetooth must be activated on the smart-  
phone to close the window(s) using the dig-  
ital key.  
The windows open for as long as the button  
on the vehicle key is pressed.  
Closing windows with the door handle  
Closing windows with the vehicle key  
With Comfort Access: To close the win-  
dows with the vehicle key, lock the ve-  
hicle, then press and hold the lock but-  
ton on the vehicle key.  
The windows close for as long as the button  
on the vehicle key is pressed.  
Depending on the vehicle equipment, exterior  
mirrors are folded in unless they were folded  
in while locking. The exterior mirrors are not  
folded in when the hazard warning flashers are  
switched on.  
To close a window using the door handle  
of a closed front door, place a finger on the  
grooved surface of the door handle and hold it  
there without reaching into the recessed grip.  
On the door handle  
In addition to locking, the windows and glass  
sunroof with sun protection will be closed.  
Principle  
Depending on the vehicle equipment, exterior  
mirrors are folded in unless they were folded  
in during locking. The exterior mirrors are not  
folded in when the hazard warning flashers are  
switched on.  
The windows can be closed using the door  
handle without operating the vehicle key.  
The vehicle key is automatically detected near  
the vehicle.  
General information  
Function availability depends on vehicle equip-  
ment.  
Depending on national-market version, the  
windows can also be closed via the door han-  
dle using a compatible smartphone and digital  
key.  
Additional information:  
BMW Digital Key, refer to page 83.  
91  
Opening and closing  
CONTROLS  
The window closes while the switch is be-  
ing held.  
Inside the vehicle  
Overview  
▷
On the door, pull the power window  
switch past the resistance point.  
The window closes automatically.  
Pulling again stops the motion.  
Anti-trap mechanism  
Principle  
The anti-trap mechanism prevents objects or  
body parts becoming jammed between the  
door frame and window while a window is be-  
ing closed.  
The power window switches are lo-  
cated on the doors.  
General information  
If resistance or blockage is detected while a  
window is being closed, the closing will be in-  
terrupted.  
Functional requirements  
To close the windows inside the vehicle, the  
following functional requirements must be met:  
▷
▷
Standby state is switched on.  
Safety information  
Drive-ready state is switched on.  
The vehicle key or digital key must be inside  
the vehicle.  
Warning  
Accessories on the windows such as anten-  
nas can impact anti-trap mechanism. There  
is a risk of injury. Do not install accessories in  
the area of movement of the windows.  
Opening windows  
To open the windows, proceed as follows:  
▷
On the door, press the power win-  
dow switch to the resistance point.  
The window opens while the switch  
is being held.  
Closing without the anti-trap  
mechanism  
In case of danger from the outside or if icing  
might prevent normal closing, proceed as fol-  
lows:  
▷
On the door, press the power win-  
dow switch past the resistance  
point.  
The window opens automatically. Pressing  
the switch again stops the motion.  
1.  
On the door, pull the power window  
switch past the resistance point and hold it.  
Closing the windows  
To close the windows, proceed as follows:  
▷
On the door, pull the power window  
switch to the resistance point.  
92  
Opening and closing  
CONTROLS  
The window closes with limited anti-trap  
mechanism. If the closing force exceeds a  
certain threshold, closing is stopped.  
Overview  
2.  
On the door, pull the power win-  
dow switch past the resistance point again  
within approx. 4 seconds and hold it there.  
The window closes without the anti-trap  
mechanism.  
Opening windows automatically  
The safety switch is located on the  
driver's door.  
If the driver’s window is frequently opened in  
the same location, the window can be set to  
open automatically. This is useful if you fre-  
quently use the same parking garage, for ex-  
ample.  
Turning the safety functions on/off  
To activate/deactivate the safety func-  
tion, press the safety switch on the  
driver’s door.  
For the driver’s window to open automat-  
ically, the vehicle speed must be below  
6 mph/10 km/h and there must be sufficient  
GPS reception.  
The LED in the button illuminates when the  
safety function is switched on.  
Additional information:  
Settings, refer to page 87.  
Glass sunroof  
Safety information  
Warning  
Safety switch  
Principle  
The safety switch can be used to prevent chil-  
dren, for instance, from opening and closing  
the rear windows using the switches in the  
rear.  
Body parts can be jammed when operating  
the glass sunroof. There is a risk of injury.  
Make sure that the area of movement of the  
glass sunroof is clear during opening and  
closing.  
If an accident of a certain severity occurs, the  
safety function is switched off automatically.  
With the vehicle key  
Opening glass sunroof  
To open the glass sunroof, unlock the  
vehicle, then press and hold the unlock  
button on the vehicle key.  
93  
Opening and closing  
CONTROLS  
The glass sunroof with sun protection will be  
opened for as long as the button on the vehicle  
key is pressed.  
▷
▷
Carry the vehicle key with you, e.g., in your  
pants pocket.  
Bluetooth must be activated on the smart-  
phone to close the glass sunroof using the  
digital key.  
Closing glass sunroof  
With Comfort Access: To close the  
glass sunroof, lock the vehicle, then  
press and hold the lock button on the  
vehicle key when close to the vehicle.  
Closing glass sunroof  
The glass sunroof with sun protection will be  
closed for as long as the button on the vehicle  
key is pressed.  
Depending on the vehicle equipment, exterior  
mirrors are folded in unless they were folded  
in while locking. The exterior mirrors are not  
folded in when the hazard warning flashers are  
switched on.  
To close the glass sunroof using the door han-  
dle of a closed front door, place a finger on the  
grooved surface of the door handle and hold it  
there without reaching into the recessed grip.  
On the door handle  
Principle  
In addition to locking, the windows and glass  
sunroof with sun protection will be closed.  
The glass sunroof can be closed using the  
door handle without operating the vehicle key.  
Depending on the vehicle equipment, exterior  
mirrors are folded in unless they were folded  
in while locking. The exterior mirrors are not  
folded in when the hazard warning flashers are  
switched on.  
The vehicle key is automatically detected near  
the vehicle.  
General information  
Function availability depends on vehicle equip-  
ment.  
Inside the vehicle  
Depending on the country, the glass sunroof  
can also be closed via the door handle using  
compatible smartphones and your digital key.  
General information  
The glass sunroof and the sun protection are  
operated using the same switch.  
Additional information:  
BMW Digital Key, refer to page 83.  
Functional requirements  
To close the glass sunroof using the door han-  
dle, the following functional requirements must  
be met:  
94  
Opening and closing  
CONTROLS  
▷
In the headliner, push the  
glass sunroof and sun pro-  
tection switch back to the re-  
sistance point and hold it.  
Overview  
Holding down the switch  
opens the sun protection. If  
the sun protection is already  
completely open, the glass  
sunroof opens.  
▷
▷
Push the switch forward to the resistance  
point and hold.  
The glass sunroof/sun protec-  
tion switch is located in the  
headliner.  
The glass sunroof closes while the switch  
is being held. If the glass sunroof is already  
closed or tilted, the sun protection closes.  
Push the switch back past the resistance  
point.  
Functional requirements  
The glass sunroof and sun protection can be  
operated under the following conditions.  
The sun protection opens automatically. If  
the sun protection is already completely  
open, the glass sunroof opens automati-  
cally.  
▷
▷
Standby state is switched on.  
Pressing the switch again stops the motion.  
Drive-ready state is switched on.  
▷
Push the switch forward past the resistance  
point.  
The vehicle key must be inside the vehicle.  
The glass sunroof closes automatically. If  
the glass sunroof is already closed or tilted,  
the sun protection closes automatically.  
Lifting/closing glass sunroof  
To raise/close the glass sun-  
roof, briefly press the glass sun-  
roof/sun protection switch in the  
headliner upward.  
Pressing the switch again stops the motion.  
Opening/closing the glass sunroof and  
sun protection together  
To open/close the glass sunroof and sun pro-  
tection together, proceed as follows:  
▷
The closed glass sunroof tilts  
and the sun protection opens  
slightly.  
▷
▷
The opened glass sunroof closes until it  
is in the tilted position. The sun protection  
does not move.  
▷
In the headliner, push the  
glass sunroof and sun pro-  
tection switch back twice, in  
quick succession, past the  
resistance point.  
The tilted glass sunroof closes.  
Opening/closing the glass sunroof and  
sun protection separately  
To open/close the glass sunroof and sun pro-  
tection separately, proceed as follows:  
The glass sunroof and sun  
protection open together.  
95  
Opening and closing  
CONTROLS  
Pressing the switch again  
stops the motion.  
1. Close all doors.  
2. Turn on drive-ready state or stop the vehi-  
cle if moving.  
▷
Briefly push the switch out and forward,  
twice in quick succession, past the resist-  
ance point.  
3. In the headliner, push the glass sun-  
roof/sun protection switch forward, past the  
resistance point, and hold it there.  
The glass sunroof and sun protection close  
together.  
The glass sunroof closes with limited anti-  
trap mechanism. If the closing force ex-  
ceeds a certain threshold, closing is stop-  
ped.  
Pressing the switch again stops the motion.  
Comfort position  
4. Push the switch forward again past the  
resistance point and hold, until the glass  
sunroof closes without the anti-trap mech-  
anism. Make sure that the closing path is  
clear.  
On some models, there is less wind noise  
inside the vehicle when the glass sunroof is  
not fully open. In these models, the automatic  
function initially only opens the glass sunroof  
up to this comfort position.  
Pressing the glass sunroof and sun protection  
switch in the headliner opens the glass sunroof  
fully.  
Closing from the lifted position without  
the anti-trap mechanism  
In case of danger from the outside or if icing  
might prevent normal closing, proceed as fol-  
lows:  
Anti-trap mechanism  
Principle  
The anti-trap mechanism prevents objects or  
body parts from becoming jammed between  
the roof frame and glass sunroof while the  
glass sunroof is closing.  
1. Close all doors.  
If resistance or a blockage is detected while  
the glass sunroof is closing, it will stop closing  
when the roof reaches the half-open position  
or when closing from the tilted position.  
2. Turn on drive-ready state or stop the vehi-  
cle if moving.  
3. In the headliner, push the glass sun-  
roof/sun protection switch forward, past the  
resistance point, and hold it there.  
Closing from the open position without  
the anti-trap mechanism  
In case of danger from the outside or if icing  
might prevent normal closing, proceed as fol-  
lows:  
Initializing after a power interruption  
General information  
After a power interruption during the opening  
or closing process, the glass sunroof can only  
be operated to a limited extent. Initializing the  
system can help in this case.  
The system can be initialized under the follow-  
ing conditions:  
96  
Opening and closing  
CONTROLS  
▷
▷
The vehicle is parked in a horizontal posi-  
tion.  
The vehicle will not be moved until the initi-  
alization is completed.  
▷
▷
The drive-ready state is established.  
The outside temperature is above  
41 ℉/5 ℃.  
During initialization, the glass sunroof closes  
without the anti-trap mechanism.  
Make sure that the closing path is clear.  
Initializing the system  
To initialize the system, in the  
headliner, press the glass sun-  
roof/sun protection switch up-  
ward and hold it until initializa-  
tion is complete:  
Initialization begins within 15 seconds.  
▷
▷
▷
If the glass sunroof is closed, it opens then  
closes again.  
If the glass sunroof is open, it first closes,  
then opens and closes again.  
The sun protection is initialized in the  
closed position.  
Initialization is complete once the glass sun-  
roof and the sun protection have opened then  
closed again.  
97  

Related Topics

CONTROLS
Dashboard Sensors of the vehicle Operating state of the vehicle BMW iDrive BMW Remote Software Upgrade Personal settings Seats, mirrors and steering wheel Transporting children safely Driving Displays Light and view Safety Driving stability control systems Driver assistance systems Parking Driving comfort Climate control Interior equipment Storage compartments Cargo area

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot