Get QUICK REFERENCE -> On the road Guide for BMW X2 4 Door Second Generation (2023-2025)

On the road

QUICK REFERENCE

On the road

Auto Start/Stop function

Driving

The Auto Start/Stop function switches the en-

gine off automatically while stationary to save

fuel. The engine starts automatically under the

following preconditions:

Drive-ready state

Overview

▷

By releasing the brake pedal.

When Automatic Hold is activated: step on

the accelerator pedal.

Steptronic transmission

Engaging selector lever position D, N,

R, S, L

Start/Stop button.

Turning on the drive-ready state

1. Depress the brake pedal.

2. Press the Start/Stop button.

If READY is displayed in the instrument cluster,

the Auto Start/Stop function is ready to start

the engine automatically.

▷

D is drive.

N Neutral.

Reverse R.

Turning off drive-ready state

1. When the vehicle is stationary, press the

brake.

With shift paddles: S is Sport program.

Without shift paddles: L LOW mode.

To prevent the vehicle from moving after en-

gaging drive or reverse, maintain pressure on

the brake pedal until you are ready to drive off.

2. Engage the parking brake.

3. Press the Start/Stop button.

The READY indicator goes out and a signal

tone sounds.

Only engage selector lever position R when the

vehicle is stationary.

The drive-ready state is switched off automat-

ically if the driver's seat belt is not buckled

when the driver's door is opened.

Sport program: the gearshift behavior is de-

signed for a sportier driving behavior.

LOW mode: the engine braking effect is in-

creased and acceleration is quicker.

22

On the road

QUICK REFERENCE

Engaging selector lever position P

Only press parking brake button P when the

vehicle is stationary.

Light and view

Turn signal, high-beam headlights,

headlight flasher

Turn signal

Press the parking brake button on the

center console.

The parking brake is applied and the

transmission lock is engaged.

▷

To flash the turn signal, push the turn sig-

nal lever up or down past the resistance

point.

Parking brake

▷

For one-touch signaling: Lightly tap the

turn signal lever up or down.

Setting the parking brake

To flash the turn signal briefly: Push the

turn signal lever to the resistance point and

hold it there for as long as you wish to indi-

cate a turn.

To engage the parking brake, press

the parking brake button on the center

console.

The LED on the button and the indicator light

in the instrument cluster are illuminated.

High-beam headlights,

headlight flasher

The parking brake is engaged and transmis-

sion lock is engaged.

Releasing the parking brake

With selector lever position P and drive-

ready state switched on, press the

parking brake button on the center

console.

The LED and the indicator light go out.

The parking brake is released.

▷

To turn on the high-beam headlights, push

the turn signal lever forward, arrow 1.

Parking

Make sure the parking brake is engaged.

23

On the road

QUICK REFERENCE

The high-beam headlights illuminate when

the low-beam headlights are switched on.

Icon

Function

Left roadside parking light.

▷

To turn off the high-beam headlights or op-

erate the headlight flasher, pull the turn sig-

nal lever backward, arrow 2.

Right roadside parking light.

Lights and lighting

Window wiper system

Buttons in vehicle

Turning on window wiper system

Icon

Function

Exterior lighting menu.

Automatic headlight control.

Low-beam headlights.

Exterior lighting off.

To turn on the wiper system, push the wiper

lever upward to the desired position.

Functions via iDrive

Position

Function

Icon

Function

Position 0.

Position 1.

Position 2.

Position 3.

Rest position of wipers.

Rain sensor mode.

Normal wiper speed.

Fast wiper speed.

Automatic headlight control.

Low-beam headlights.

Exterior lighting off.

Automatic High Beam Assistant.

Parking lights.

24

On the road

QUICK REFERENCE

Turning off the window wiper system

and flick wipe

Adjusting the rain sensor sensitivity

To adjust the sensitivity of the rain sensor, turn

the knurled wheel on the wiper lever.

To turn off the wipers or to activate flick wiping,

proceed as follows:

▷

To turn off: Push the wiper lever downward,

arrow 1, until position 0 is reached.

Cleaning the windshield

▷

To flick wipe: Push the wiper lever down-

ward from position 0, arrow 1, and push the

wiper lever forward to position 0 or position

1, arrow 2.

The wiper lever returns to its initial position

when released.

Activating/deactivating rain sensor

To clean the windshield, pull the wiper lever

back.

Climate control

Climate control functions

Functions in the Climate menu

To activate the rain sensor: Push the wiper

lever upward from position 0, arrow 1, once.

Icon

Function

To deactivate the rain sensor: Push the wiper

lever back to position 0.

Turn the climate control sys-

tem on/off.

Automatic program.

25

On the road

QUICK REFERENCE

Buttons, automatic climate control

Icon

Function

Temperature.

Air flow.

Air distribution.

Air conditioning.

Maximum cooling.

Icon

Function

Defrost function.

Rear window defroster.

Air recirculation mode.

Automatic recirculated-air con-

trol.

Fresh air.

SYNC program.

Seat heating.

Steering wheel heating.

26

On the road

QUICK REFERENCE

Wheels and tires

Intermediate stop

Tire pressure specifications

The tire inflation pressure specifications can be

found in the tire inflation pressure table in the

printed Owner's Manual.

Refueling

Fuel filler cap

1. To open the fuel filler flap, press on the rear

edge, arrow. The fuel filler flap opens.

After correcting the tire pressure

If vehicle is equipped with the Tire Pressure

Monitor, corrected tire pressures are applied

automatically. Make sure that the correct tire

settings have been made. When using tires

not listed in the tire inflation pressure specifi-

cations on the Interaction Unit, reset the Tire

Pressure Monitor.

If equipped with a flat tire monitor, reinitialize

the flat tire monitor.

2. Open the fuel filler cap counterclockwise.

Checking the tire pressure

Regularly check the tire inflation pressure and

correct it as needed:

▷

At least twice a month.

Before embarking on an extended trip.

Electronic oil measurement

Functional requirements

A current measured value is available after ap-

prox. 30 minutes of normal driving with the

combustion engine running.

3. Place the fuel filler cap in the bracket on the

fuel filler flap.

Displaying the engine oil level

To display the engine oil level on the control

display, go through the menu as follows: Apps

menu / "Vehicle" / "Vehicle status" / "Engine oil

level".

The engine oil level is displayed.

Adding engine oil

General information

Safely park the vehicle and switch off drive-

ready state before adding engine oil.

27

On the road

QUICK REFERENCE

Adding engine oil

BMW Teleservices

1. Opening the hood.

Teleservices are services that help to maintain

vehicle mobility.

2. Open the lid counterclockwise.

Teleservices can comprise the following serv-

ices:

▷

BMW Roadside Assistance.

BMW Accident Assistance.

Teleservice Call.

An authorized service center.

3. Add engine oil.

4. Close the lid.

Providing assistance

Hazard warning system

The button for the hazard warning sys-

tem is located on the center console.

ConnectedDrive

BMW Assistance

Contact BMW Assistance for information and

support for all aspects of the vehicle.

1. Go through the menu as follows: Apps

menu / "All" / "BMW Assist".

2. Select the desired service, as necessary.

A voice connection to the selected service is

established.

28

On the road

QUICK REFERENCE

29

QUICK REFERENCE -> On the road for Your BMW X2 4 Door Second Generation (2023-2025)

Related Topics

QUICK REFERENCE

Popular Owner Manuals

Latest Owner Manuals