Controls
Climate
Depending on the weather, the windshield may
fog up briefly when the engine is started.
Manual air distribution
The air flow can be guided into the vehicle inte‐
rior, separately for the driver's and front passen‐
ger side, using one of the following programs:
The cooling function is switched on automati‐
cally with the AUTO program.
▷
▷
▷
▷
Upper body region.
Upper body region and footwell.
Footwell.
When using the automatic climate control, con‐
densation water, refer to page 154, develops
that exits underneath the vehicle.
Driver's side: in addition, the windshield,
side windows, and footwell.
Maximum cooling
Press the button.
The system is set to the lowest
temperature, maximum air volume
and recirculated-air mode.
Selecting program
Press the button repeatedly until the
desired program is shown on the Con‐
trol Display.
Air flows out of the vents for the upper body re‐
gion. Open them for this purpose.
Air is cooled as quickly as possible:
▷
At an external temperature of approx.
32 ℉/0 ℃.
▷
When the engine is running.
Automatic recirculated air mode/
recirculated air mode
You can respond to unpleasant odors or pollu‐
tants in the immediate environment by tempo‐
rarily suspending the supply of outside air. The
system then recirculates the air currently within
the vehicle.
1
2
3
Air toward the windshield and side windows
Air for the upper body
Air to footwell
Pressing the AUTO button cancels the manual
air distribution settings.
Press the button repeatedly to select
an operating mode:
The automatic mode for the air volume remains
effective with manual air distribution.
▷
▷
LEDs off: outside air flows in continuously.
Left LED on, automatic recirculated-air con‐
trol: a sensor detects pollutants in the out‐
side air and controls the shutoff automati‐
cally.
Cooling function
The passenger compartment can only be
cooled with the engine running.
▷
Right LED on, recirculated air mode: the
supply of outside air into the vehicle is per‐
manently blocked.
Press the button.
The air is cooled and dehumidified and
– depending on the temperature setting –
warmed again.
If the windows are fogged over, switch off the
recirculated-air mode and press the AUTO but‐
ton to utilize the condensation sensor. Make
sure that air can flow onto the windshield.
The cooling function helps to prevent conden‐
sation on the windows or to remove it quickly.
130