Driving -> Parking brake for Your BMW X6 4 Door Second Generation (2015-2019)

Controls  
Driving  
LED goes out: auto Start/Stop function is  
activated.  
In order to ensure that the vehicle is secured  
against rolling away, observe the following:  
Set the parking brake.  
Switching off the vehicle during an  
automatic engine stop  
During an automatic engine stop, the vehicle  
can be switched off permanently, for instance  
when leaving it.  
On uphill grades or on a downhill slope,  
turn the front wheels in the direction of the  
curb.  
On uphill grades or on a downhill slope,  
also secure the vehicle, e.g., with a wheel  
chock.◀  
Steptronic transmission:  
1. Press the Start/Stop button. The ignition is  
switched off. The Auto Start/Stop function  
is deactivated.  
WARNING  
Unattended children or animals can  
cause the vehicle to move and endanger them‐  
selves and traffic, e.g., due to the following ac‐  
tions:  
Selector lever position P is engaged auto‐  
matically.  
2. Set the parking brake.  
Pressing the Start/Stop button.  
Releasing the parking brake.  
Engine start as usual via Start/Stop button.  
Opening and closing the doors or win‐  
dows.  
Automatic deactivation  
In certain situations, the Auto Start/Stop func‐  
tion is deactivated automatically for safety rea‐  
sons, e.g., if no driver is detected.  
Engaging selector lever position N.  
Using vehicle equipment.  
There is a risk of accidents or injuries. Do not  
leave children or animals unattended in the ve‐  
hicle. Take the remote control with you when  
exiting and lock the vehicle.◀  
Malfunction  
The Auto Start/Stop function no longer  
switches off the engine automatically. A Check  
Control message is displayed. It is possible to  
continue driving. Have the system checked by  
a dealer’s service center or another qualified  
service center or repair shop.  
Overview  
Parking brake  
Concept  
The parking brake is used to prevent the vehi‐  
cle from rolling when it is parked.  
Parking brake  
Safety information  
WARNING  
An unsecured vehicle can begin to move  
and possibly roll away. There is a risk of an ac‐  
cident. Before exiting, secure the vehicle  
against rolling.  
74  
Driving  
Controls  
Driver buckled in and doors closed.  
Setting  
With a stationary vehicle  
Automatic Hold  
Concept  
This system assists the driver by automatically  
setting and releasing the brake, such as when  
moving in stop-and-go traffic.  
Pull the switch.  
The LED lights up.  
The indicator light lights up red. The  
parking brake is set.  
The vehicle is automatically held in place when  
it is stationary.  
While driving  
To use as emergency brake while driving:  
On inclines, the system prevents the vehicle  
from rolling backward when driving off.  
Pull the switch and hold it. The vehicle brakes  
hard while the switch is being pulled.  
General information  
Under the following conditions, Automatic  
Hold is automatically deactivated and the park‐  
ing brake is set:  
The indicator light lights up red, a sig‐  
nal sounds and the brake lights light  
up.  
The engine is switched off.  
A Check Control message is displayed.  
A door is opened and driver's safety belt is  
unbuckled while the vehicle is stationary.  
If the vehicle is slowed down to a speed of ap‐  
prox. 2 mph/3 km/h the parking brake is set.  
The moving vehicle is brought to a stand‐  
still using the parking brake.  
Releasing  
The indicator light switches from green  
to red and the letters AUTO H go out.  
Releasing manually  
1. Switch on the ignition.  
Safety information  
2.  
Steptronic transmission: press the  
switch while the brake is pressed or selec‐  
tor lever position P is set.  
WARNING  
An unsecured vehicle can begin to move  
and possibly roll away. There is a risk of an ac‐  
cident. Before exiting, secure the vehicle  
against rolling.  
The LED and indicator light go out.  
The parking brake is released.  
In order to ensure that the vehicle is secured  
against rolling away, observe the following:  
Automatic release in cars with  
Steptronic transmission  
Set the parking brake.  
For automatic release, step on the accelerator  
pedal.  
On uphill grades or on a downhill slope,  
turn the front wheels in the direction of the  
curb.  
The LED and indicator light go out.  
The parking brake is automatically released  
when you step on the accelerator under the  
following conditions:  
On uphill grades or on a downhill slope,  
also secure the vehicle, e.g., with a wheel  
chock.◀  
Engine on.  
Drive mode engaged.  
75