Controls
Driving comfort
If the vehicle is equipped accordingly, obstacle
markings can be faded into the image of the
rearview camera.
Contrast
With the rearview camera switched on:
1.
Select the symbol.
The colored thresholds of the obstacle mark‐
ings match the markings of the PDC Park Dis‐
tance Control.
2. Turn the controller until the desired setting
is reached, and press the controller.
System limits
Parking using pathway and turning
radius lines
1. Position the vehicle so that the turning ra‐
dius lines lead to within the limits of the
parking space.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
If the vehicle is equipped accordingly, some
assistance functions also consider data from
PDC Park Distance Control.
Follow the notes in the PDC Park Distance
Control chapter.
The objects displayed on the Control Display
may be closer than they appear. Do not esti‐
mate the distance from the objects on the dis‐
play.
2. Turn the steering wheel to the point where
the pathway line covers the corresponding
turning radius line.
Top View
Concept
Top View provides assistance in parking and
maneuvering. The area around the vehicle is
shown on the Control Display.
General information
The image is captured by two cameras
integrated in the exterior mirrors, by the rear‐
view camera and a camera on the front of the
vehicle.
Display settings
The range is no more than approx. 6.5 ft/2 m to
the side, front and rear.
Brightness
With the rearview camera switched on:
Obstacles within this range are thus displayed
early on the Control Display.
1.
Select the symbol.
2. Turn the controller until the desired setting
is reached, and press the controller.
166
English 