Saving fuel -> ECO PRO for Your BMW X6 4 Door Second Generation (2015-2019)

Driving tips  
Saving fuel  
Avoid high engine speeds  
Driving at low engine speeds lowers fuel con‐  
sumption and reduces wear.  
Switch off any functions that  
are not currently needed  
Functions such as seat heating and the rear  
window defroster require a lot of energy and  
reduce the range, especially in city and stop-  
and-go traffic.  
If necessary, observe the vehicle's gear shift  
indicator, refer to page 98.  
Switch off these functions if they are not  
needed.  
Use coasting  
The ECO PRO driving program supports the  
energy conserving use of comfort features.  
These functions are automatically deactivated  
partially or completely.  
When approaching a red light, take your foot  
off the accelerator and let the vehicle coast to  
a halt.  
For going downhill take your foot off the accel‐  
erator and let the vehicle roll.  
The flow of fuel is interrupted while coasting.  
Have maintenance carried  
out  
Switch off the engine during  
longer stops  
Have the vehicle maintained regularly to ach‐  
ieve optimal vehicle efficiency and service life.  
BMW recommends that maintenance work be  
performed by a BMW dealer’s service center.  
Switching off the engine  
For information on the BMW Maintenance  
System, refer to page 246.  
Switch off the engine during longer stops, for  
instance at traffic lights, railroad crossings or in  
traffic congestion.  
ECO PRO  
Auto Start/Stop function  
The Auto Start/Stop function of the vehicle au‐  
tomatically switches off the engine during a  
stop.  
Concept  
ECO PRO supports a driving style that saves  
on fuel consumption. For this purpose, the en‐  
gine control and comfort features, for instance  
the climate control output, are adjusted.  
If the engine is switched off and then restarted  
rather than leaving the engine running con‐  
stantly, fuel consumption and emissions are  
reduced. Savings can begin within a few sec‐  
onds of switching off the engine.  
In addition, context-sensitive instructions are  
displayed to assist with an optimized fuel con‐  
sumption driving style.  
In addition, fuel consumption is also deter‐  
mined by other factors, such as driving style,  
road conditions, maintenance or environmental  
factors.  
The achieved extended range is displayed in  
the instrument cluster as bonus range.  
General information  
The system includes the following  
EfficientDynamics functions and displays:  
ECO PRO bonus range, refer to page 209.  
208  
Saving fuel  
Driving tips  
ECO PRO tip, driving tip, refer to  
page 210.  
ECO PRO climate control  
To activate ECO PRO climate control:  
"ECO PRO climate control"  
ECO PRO climate control, refer to  
page 209.  
Climate control is set to be fuel-efficient.  
Coasting driving condition, refer to  
page 211.  
That is, it is possible to deviate slightly from  
the set temperature or to heat or cool the car's  
interior more slowly, to economize on fuel con‐  
sumption.  
Overview  
The mirror heating is made available when ex‐  
ternal temperatures are very cold.  
ECO PRO potential savings  
Shows potential savings with the current set‐  
tings in percentages.  
Display in the instrument cluster  
Display in the instrument display  
Driving Dynamics Control  
When ECO PRO driving mode is activated, the  
display switches to a special configuration.  
Activating ECO PRO  
Some of the displays may differ from the dis‐  
play in the instrument cluster.  
Press button repeatedly until ECO  
PRO is displayed in the instrument  
Blue bar segments symbolize the gained bo‐  
nus range in stages.  
cluster.  
In addition, the bonus range is highlighted in  
blue in the total range display.  
Configuring ECO PRO  
Via the Driving Dynamics Control  
1. Activate ECO PRO.  
ECO PRO bonus range  
An adjusted driving style helps  
you extend your driving range.  
2.  
"Configure ECO PRO"  
This may be displayed as the  
bonus range in the instrument  
cluster.  
Using iDrive  
1. "Settings"  
2. If necessary, "Driving mode"  
The bonus range is shown in the range display.  
3.  
"Configure ECO PRO"  
The bonus range is automatically reset every  
time the vehicle is refueled.  
ECO PRO limit  
"ECO PRO speed warning":  
An ECO PRO tip is displayed if the speed  
of the set ECO PRO limit is exceeded.  
"Tip at:":  
Set the desired ECO PRO speed.  
209  
Driving tips  
Saving fuel  
ECO PRO efficiency display  
ECO PRO tip, driving tip  
The arrow indicates that the driving  
style can be adjusted to be more fuel  
efficient, for instance by backing off the  
Display in the instrument cluster  
accelerator.  
Activating the ECO PRO efficiency  
display and ECO PRO tips  
The ECO PRO efficiency display and ECO  
PRO tips in the instrument cluster appear  
when the ECO PRO display is activated.  
Activating the display via iDrive:  
Display in the instrument display  
1. "Settings"  
2. "Instrument cluster"  
3. "ECO PRO Info"  
In the instrument display:  
1. "Settings"  
2. "Instrument cluster"  
3. "Driving mode view"  
ECO PRO tip, symbols  
An additional symbol and text instructions are  
displayed.  
A mark in the efficiency display informs about  
the current driving style.  
Mark in the area of arrow 1: display of the en‐  
ergy recovered by coasting or when braking.  
Symbol Measure  
For efficient driving back off the ac‐  
celerator or delay accelerating to al‐  
low time to assess road conditions.  
Mark in the area of arrow 2: display when ac‐  
celerating.  
Your driving style's efficiency is shown by the  
bar's color:  
Reduce speed to the selected ECO  
PRO speed.  
Blue display: efficient driving style as long  
as the mark moves within the blue range.  
Steptronic transmission: switch  
from M/S to D and avoid manual  
shift interventions.  
Gray display: modify driving style, for in‐  
stance by backing off the accelerator  
pedal.  
The display turns blue as soon as all conditions  
for driving with optimized fuel efficiency are  
met.  
Indications on the Control Display  
Displaying EfficientDynamics info  
Information on fuel consumption and technol‐  
ogy can be displayed while driving.  
210  
Saving fuel  
Driving tips  
Using iDrive:  
A proactive driving style helps the driver to use  
the function often and supports the fuel-con‐  
serving effect of coasting.  
1. "Vehicle info"  
2. "EfficientDynamics"  
Functional requirements  
In ECO PRO mode, this function is available in  
a speed range from approximately  
30 mph/50 km/h to 100 mph/160 km/h if the  
following conditions are met:  
Displaying EfficientDynamics info  
The current efficiency can be displayed.  
"EfficientDynamics info"  
The following systems are displayed:  
Accelerator pedal and brake pedal are not  
operated.  
Auto Start/Stop function.  
Energy recovery.  
The selector lever is in selector lever posi‐  
tion D.  
Climate control output.  
Engine and transmission are at operating  
temperature.  
Display ECO PRO tips  
"ECO PRO tips"  
Settings are stored for the profile currently  
used.  
Operation via shift paddles  
Concept  
Coasting  
Depending on your vehicle's equipment, the  
coasting mode can be influenced with the shift  
paddles.  
Concept  
The function helps to conserve fuel.  
Activating/deactivating coasting via shift  
paddles  
To do this, under certain conditions the engine  
is automatically decoupled from the transmis‐  
sion when selector lever position D is set. The  
vehicle continues traveling with the engine  
idling to reduce fuel consumption. Selector  
lever position D remains engaged.  
1. Shift to the highest gear by pulling the right  
shift paddle.  
2. To activate coasting mode, actuate the  
right shift paddle again.  
This driving condition is referred to as coast‐  
ing.  
To deactivate, actuate the left shift paddle.  
As soon as you step on the brake or accelera‐  
tor pedal, the engine is automatically coupled  
again.  
Display  
Display in the instrument cluster  
The mark in the efficiency dis‐  
play below the tachometer is  
backlit in blue and is located at  
the zero point. The tachometer  
approximately indicates idle  
speed.  
General information  
Coasting is a component of the ECO PRO driv‐  
ing mode.  
Coasting is automatically activated when ECO  
PRO mode is called via the Driving Dynamics  
Control.  
The coasting point indicator is illuminated at  
the zero point during coasting.  
The function is available in a certain speed  
range.  
211  
Driving tips  
Saving fuel  
Display in the instrument display  
The mark in the efficiency dis‐  
If driving on steep uphill or downhill grades.  
If the battery charge state is temporarily  
too low.  
play is backlit in blue and is lo‐  
cated at the zero point.  
If the vehicle electrical system is drawing  
excessive current.  
The coasting point indicator is il‐  
luminated at the zero point dur‐  
ing coasting.  
Indications on the Control Display  
The coasting driving condition is displayed in  
EfficientDynamics Info while this driving mode  
is active.  
Color code blue, arrow 1, and symbol, arrow 2:  
driving condition coasting.  
Displaying EfficientDynamics info  
1. "Vehicle info"  
2. "EfficientDynamics"  
3.  
"EfficientDynamics info"  
Deactivating the function manually  
The function can be deactivated in the Config‐  
ure ECO PRO menu, e.g., to use the braking  
effect of the engine when traveling downhill.  
Settings are stored for the profile currently  
used.  
System limits  
The function is not available if one of the fol‐  
lowing conditions applies:  
DSC OFF or TRACTION activated.  
If cruise control is activated.  
If driving in the dynamic limit range.  
212  
Saving fuel  
Driving tips  
213