Wheels and tires -> Run-flat tires for Your BMW X6 4 Door Second Generation (2015-2019)

Wheels and tires  
Mobility  
New tires  
Rotating wheels between axles  
Tire traction is not optimal due to manufactur‐  
ing circumstances when tires are brand-new;  
they achieve their full traction potential after a  
break-in time.  
Different wear patterns can occur on the front  
and rear axles depending on individual driving  
conditions. The tires can be rotated in pairs  
between the axles to achieve even wear. Fur‐  
ther information is available from a dealer’s  
service center or another qualified service cen‐  
ter or repair shop. After rotating, check the tire  
pressure and correct, if needed.  
Drive conservatively for the first  
200 miles/300 km.  
Retreaded tires  
Rotating the tires between the axes is not per‐  
missible on vehicles with different tire sizes or  
rim sizes on the front and rear axles.  
The manufacturer of your vehicle does not rec‐  
ommend the use of retreaded tires.  
WARNING  
Retreaded tires can have different tire  
casing structures. With advanced age the serv‐  
ice life can be limited. There is a risk of an acci‐  
dent. The manufacturer of your vehicle does  
not recommend the use of retreaded tires.◀  
Storing tires  
Air pressure  
Do not exceed the maximum tire inflation pres‐  
sure indicated on the side wall of the tire.  
Winter tires  
Storage  
Winter tires are recommended for operating on  
winter roads.  
Store wheels and tires in a cool, dry and dark  
place.  
Although so-called all-season M+S tires pro‐  
vide better winter traction than summer tires,  
they usually do not provide the same level of  
performance as winter tires.  
Always protect tires against all contact with oil,  
grease, and solvents.  
Do not leave tires in plastic bags.  
Remove dirt from wheels or tires.  
Maximum speed of winter tires  
If the maximum speed of the vehicle is higher  
than the permissible speed for the winter tires,  
then attach a label showing the permissible  
maximum speed in the field of view. The label  
is available from a dealer’s service center or  
another qualified service center or repair shop.  
Run-flat tires  
Concept  
Run-flat tires permit continued driving under  
restricted conditions even in the event of a  
complete loss of tire inflation pressure.  
With winter tires mounted, observe and do not  
exceed the permissible maximum speed.  
General information  
The wheels consist of tires that are self-sup‐  
porting, to a limited degree, and possibly spe‐  
cial rims.  
Run-flat tires  
If you are already using run-flat tires, for your  
own safety you should replace them only with  
the same kind. No spare tire is available in the  
case of a flat tire. Further information is availa‐  
ble from a dealer’s service center or another  
qualified service center or repair shop.  
The support of the sidewall allows the tire to  
remain drivable to a restricted degree in the  
event of a tire inflation pressure loss.  
227  
Mobility  
Wheels and tires  
Follow the instructions for continued driving  
with a flat tire.  
side the immediate area in a safe place,  
such as behind a guardrail.  
If necessary, set up a warning triangle at an  
appropriate distance.  
Safety information  
WARNING  
Your vehicle handles differently with a  
run-flat with no or low inflation pressure; for in‐  
stance, your lane stability when braking is re‐  
duced, braking distances are longer and the  
self-steering properties will change. There is a  
risk of an accident.  
Mobility System  
Concept  
With the Mobility System, minor tire damage  
can be sealed temporarily to enable continued  
travel. To accomplish this, sealant is pumped  
into the tires, which seals the damage from the  
inside.  
Drive moderately and do not exceed a speed of  
50 mph/80 km/h.◀  
Label  
General information  
Follow the instructions on using the Mobi‐  
lity System found on the compressor and  
sealant container.  
Use of the Mobility System may be ineffec‐  
tive if the tire puncture measures approx.  
1/8 inches/4 mm or more.  
Contact a dealer’s service center or an‐  
other qualified service center or repair  
shop if the tire cannot be made drivable.  
The tires are marked on the tire sidewall with  
RSC Run-flat System Component.  
If possible, do not remove foreign bodies  
that have penetrated the tire. Only remove  
foreign objects if they are visibly protruding  
from the tire.  
Repairing a flat tire  
Pull the speed limit sticker off the sealant  
container and apply it to the steering  
wheel.  
Safety measures  
Park the vehicle as far away as possible  
from passing traffic and on solid ground.  
The use of a sealant can damage the TPM  
wheel electronics. In this case, have the  
TPM wheel electronics replaced at the  
next opportunity.  
Switch on the hazard warning system.  
Secure the vehicle against rolling away by  
setting the parking brake.  
The compressor can be used to check the  
tire inflation pressure.  
Turn the steering wheel until the front  
wheels are in the straight-ahead position  
and engage the steering wheel lock.  
Storage  
The Mobility System is located under the  
cargo floor panel.  
Have all vehicle occupants get out of the  
vehicle and ensure that they remain out‐  
228