Get QUICK REFERENCE -> On the road Guide for BMW X6 4 Door Third Generation (2020-2025)

On the road

QUICK REFERENCE

On the road

Steptronic transmission

Driving

Engaging selector lever position D, N,

R, S

Drive-ready state

Turning on the drive-ready state

1. Depress the brake pedal.

2.

On the center console, press the

Start/Stop button.

Turning off drive-ready state

After stopping the vehicle:

▷

D is drive.

1. While the vehicle is stationary, depress the

brake and engage selector lever position P.

N Neutral.

Reverse R.

S Sport mode.

2. Set the parking brake.

3. Press the Start/Stop button.

To prevent the vehicle from moving after en-

gaging drive or reverse, maintain pressure on

the brake pedal until you are ready to drive off.

The READY indicator goes out and a signal

tone sounds.

The drive-ready state is switched off automat-

ically if the driver's seat belt is not buckled

when the driver's door is opened.

Engage selector lever position R only when the

vehicle is stationary.

Sport program: the gearshift behavior is de-

signed for a sportier driving behavior.

Auto Start/Stop function

The Auto Start/Stop function helps to conserve

fuel. The system switches off the engine during

a stop, for instance in traffic jam or at traffic

lights. Drive-ready state remains switched on.

The engine starts automatically under the fol-

lowing preconditions:

Engaging selector lever position P

Engage selector lever position P only when the

vehicle is stationary.

▷

By releasing the brake pedal.

When Automatic Hold is activated: step on

the accelerator pedal.

Press button P.

22

On the road

QUICK REFERENCE

Parking brake

Light and view

Setting the parking brake

Turn signal, high-beam headlights,

headlight flasher

Pull the switch.

The LED on the switch and the indica-

tor light in the instrument cluster are

illuminated.

Turn signal

Releasing the parking brake

With drive-ready state switched on:

Press the switch while stepping on the

brake pedal or selector lever position P

is set.

The LED and the indicator light go out.

The parking brake is released.

▷

Flashing: press the lever past the resist-

ance point.

Parking

One-touch signaling: lightly tap the lever up

or down.

Make sure the parking brake is engaged.

Brief flashing: press the lever to the resist-

ance point and hold it there for as long as

you want the turn signal to flashing.

High-beam headlights,

headlight flasher

Press the lever forward or pull it backward.

▷

High-beam headlights on, arrow 1.

The high-beam headlights illuminate when

the low-beam headlights are switched on.

▷

High-beam headlights off/headlight flasher,

arrow 2.

23

On the road

QUICK REFERENCE

Lights and lighting

Window wiper system

Buttons in the vehicle

Turning on window wiper system

Icon

Function

Exterior lighting menu.

Automatic headlight control.

Low-beam headlights.

Exterior lighting off.

Press the lever up until the desired position is

reached.

▷

Rest position of the wipers, position 0.

Rain sensor mode, position 1.

Normal wiper speed, position 2.

Fast wiper speed, position 3.

Functions via iDrive

Icon

Function

Automatic headlight control.

Turning off the window wiper system

and flick wipe

Low-beam headlights.

Parking lights.

Exterior lighting off.

Left roadside parking light.

Right roadside parking light.

Press the lever down.

▷

Turning off: press the lever down until it

reaches the 0 position.

▷

Flick wipe: press the lever down from the 0

position.

The lever automatically returns to its 0 po-

sition when released.

24

On the road

QUICK REFERENCE

Activating/deactivating rain sensor

Climate control

Climate control functions

Functions in the Climate menu

Icon

Function

Turn the climate control sys-

tem on/off.

Enable: press lever up once from the 0 posi-

tion, arrow 1.

Automatic program.

Temperature.

Disable: press lever back into the 0 position.

Adjusting the rain sensor sensitivity

Air conditioning.

Maximum cooling.

Air recirculation mode.

Turn the knurled wheel on the wiper lever.

Automatic recirculated-air con-

trol.

Cleaning the windshield

Fresh air.

Air flow.

Air distribution.

SYNC program.

Seat and armrest heating.

Pull the lever.

25

On the road

QUICK REFERENCE

Function

Icon

Function

Active seat ventilation.

Automatic program.

Steering wheel heating.

Temperature.

Air conditioning.

Maximum cooling.

Air flow.

Buttons, automatic climate control

Air distribution.

Seat and armrest heating.

Icon

Function

Defrost function.

Rear window defroster.

Buttons, rear automatic climate control

26

On the road

QUICK REFERENCE

Wheels and tires

Intermediate stop

Tire pressure specifications

The tire inflation pressure specifications can be

found in the tire inflation pressure table in the

printed Owner's Manual.

Refueling

Fuel filler cap

1. To open the fuel filler flap, press on the rear

edge, arrow. The fuel filler flap opens.

After correcting the tire pressure

If equipped with a Tire Pressure Monitor, the

corrected tire pressures are applied automati-

cally. Make sure that the correct tire settings

have been made. With tires that cannot be

found in the tire pressure values on the control

display, reset the Tire Pressure Monitor (TPM).

If equipped with a flat tire monitor, reinitialize

the flat tire monitor.

2. Open the fuel filler cap counterclockwise.

Checking the tire pressure

Regularly check the tire inflation pressure and

correct it as needed:

▷

At least twice a month.

Before embarking on an extended trip.

Electronic oil measurement

Functional requirements

A current measured value is available after ap-

prox. 30 minutes of normal driving with the

combustion engine running.

3. Place the fuel filler cap in the bracket on the

fuel filler flap.

Displaying the engine oil level

1.

Apps menu

2. "Vehicle"

3. "Vehicle status"

4. "Engine oil level"

The engine oil level is displayed.

Adding engine oil

General information

Safely park the vehicle and switch off drive-

ready state before adding engine oil.

27

On the road

QUICK REFERENCE

A voice connection to the selected service is

established.

Adding engine oil

1. Opening the hood.

2. Open the lid counterclockwise.

BMW Teleservices

Teleservices are services that help to maintain

vehicle mobility.

Teleservices can comprise the following serv-

ices:

▷

BMW Roadside Assistance.

BMW Accident Assistance.

Teleservice Call.

An authorized service center.

3. Add engine oil.

4. Close the lid.

Providing assistance

Hazard warning system

Hazard warning system button

ConnectedDrive

BMW Assistance

Contact BMW Assistance for information and

support for all aspects of the vehicle.

1.

Apps menu

2. "All apps"

3. "BMW Assist"

4. If necessary, select the desired service.

28

On the road

QUICK REFERENCE

29

QUICK REFERENCE -> On the road for Your BMW X6 4 Door Third Generation (2020-2025)

Related Topics

QUICK REFERENCE

Popular Owner Manuals

Latest Owner Manuals