CONTROLS -> Operating state of the vehicle for Your BMW XM SUV First Generation (2023-2025)

Operating state of the vehicle  
CONTROLS  
Operating state of the vehicle  
In order to ensure that the vehicle is secured  
against rolling away, follow the following:  
Vehicle features and options  
Set the parking brake.  
This chapter describes model-specific equip-  
ment, systems, and functions that are currently  
available, or may become available in the fu-  
ture, even if they are not present in the vehicle.  
Automatic transmission: Make sure that  
selector lever position P is engaged.  
On uphill grades or on downhill slopes,  
turn the front wheels in the direction of  
the curb.  
Additional information:  
Vehicle equipment, refer to page 8.  
On uphill grades or on downhill slopes,  
also secure the vehicle, for instance with  
a wheel chock.  
General information  
Depending on the situation, the vehicle is in  
one of the three states:  
Warning  
Idle state.  
Unattended children or animals in the vehicle  
can cause the vehicle to move and endanger  
themselves and traffic, for example, due to  
the following actions:  
Standby state.  
Drive-ready state.  
Establishing standby.  
Idle state  
Releasing the parking brake.  
Opening and closing the doors or win-  
dows.  
Principle  
When the vehicle is in idle state, it is switched  
off.  
Engaging selector lever position N.  
Using vehicle equipment.  
There is a risk of accident, injury, and prop-  
erty damage. Do not leave children or ani-  
mals unattended in the vehicle. Take the ve-  
hicle key with you when exiting and lock the  
vehicle.  
General information  
The vehicle is in idle state prior to opening  
from the outside and after exiting and locking.  
Safety information  
Establishing the sleep mode  
automatically  
The sleep mode is established automatically  
such as in the following situations:  
Warning  
An unsecured vehicle can begin to move and  
possibly roll away. There is a risk of accident,  
injury, and property damage. Before leaving  
the vehicle, secure the vehicle against rolling  
away.  
44  
Operating state of the vehicle  
CONTROLS  
After several minutes, if no operation takes  
place on the vehicle.  
General information  
The vehicle is in standby state after the front  
doors are opened from the outside.  
If the charge state of the vehicle battery is  
low.  
Depending on the configuration via iDrive:  
one or both front doors will be opened after  
driving when exiting the vehicle.  
Manually setting to standby  
General information  
In some situations, the idle state is not set au-  
tomatically, for instance during a phone call or  
when the low-beam headlights are switched  
on.  
Standby can be switched back on after the ve-  
hicle is automatically set to idle state.  
Via the volume button  
Press the volume button on the  
radio. The control display and  
the instrument cluster illuminate.  
Establishing idle state when  
opening the front doors  
After a trip, the sleep mode can be established  
by opening the front doors. For this purpose,  
all passengers must exit the vehicle.  
Using the Start/Stop button  
1.  
Apps menu  
Press the Start/Stop button.  
2. "Vehicle"  
The control display and the instrument  
cluster illuminate.  
3. "Doors and windows"  
4. "Lock/unlock"  
5. "Turn off after opening door"  
Display in the instrument cluster  
Establishing the sleep mode  
manually  
To establish idle state in the vehicle after com-  
pletion of trip:  
OFF is displayed in the instru-  
ment cluster. Drive-ready state  
is turned off and standby state  
turned on.  
Press and hold the volume but-  
ton on the radio until all displays  
go out.  
Drive-ready state  
Principle  
The following are the different drive-ready  
state variants:  
Standby state  
Electric drive-ready state.  
Principle  
The vehicle is powered by the electric mo-  
tor.  
When standby state is switched on, most func-  
tions can be used while the vehicle is station-  
ary. Desired settings can be adjusted.  
Starting of combustion engine.  
The vehicle is powered by the combustion  
engine.  
45  
Operating state of the vehicle  
CONTROLS  
Safety information  
Warning  
Unattended children or animals in the vehicle  
DANGER  
can cause the vehicle to move and endanger  
themselves and traffic, for example, due to  
the following actions:  
If the exhaust pipe is blocked or ventilation is  
insufficient, harmful exhaust gases can pene-  
trate the vehicle. The exhaust gases contain  
pollutants which are colorless and odorless.  
In enclosed areas, exhaust gases can also  
accumulate outside of the vehicle. There is a  
danger to life. Keep the exhaust pipe free and  
ensure sufficient ventilation.  
Establishing standby.  
Releasing the parking brake.  
Opening and closing the doors or win-  
dows.  
Engaging selector lever position N.  
Using vehicle equipment.  
There is a risk of accident, injury, and prop-  
erty damage. Do not leave children or ani-  
mals unattended in the vehicle. Take the ve-  
hicle key with you when exiting and lock the  
vehicle.  
Warning  
When driving in electric mode, pedestrians  
and other road users might pay less attention  
to the vehicle due to the lack of engine noise.  
There is a risk of accident, injury, and prop-  
erty damage. Adjust driving style to traffic  
conditions. Watch surrounding traffic closely  
and actively intervene where appropriate  
Turning on the drive-ready state  
1. Close the driver's door.  
2. Depress the brake pedal.  
3. Press the Start/Stop button.  
Warning  
Most of the indicator lights and warning  
lights on the instrument cluster illuminate  
for different lengths of time depending on  
the duration of the system check.  
An unsecured vehicle can begin to move and  
possibly roll away. There is a risk of accident,  
injury, and property damage. Before leaving  
the vehicle, secure the vehicle against rolling  
away.  
If the corresponding requirements are met,  
electric drive-ready state can be used or the  
combustion engine can be started.  
In order to ensure that the vehicle is secured  
against rolling away, follow the following:  
Set the parking brake.  
Electric drive-ready state  
Automatic transmission: Make sure that  
selector lever position P is engaged.  
General information  
The vehicle is ready for driving without starting  
the combustion engine.  
On uphill grades or on downhill slopes,  
turn the front wheels in the direction of  
the curb.  
On uphill grades or on downhill slopes,  
also secure the vehicle, for instance with  
a wheel chock.  
Functional requirements  
Electric drive-ready state can be used if the  
corresponding requirements for electric drive  
are met.  
Additional information:  
46  
Operating state of the vehicle  
CONTROLS  
BMW eDRIVE, refer to page 16.  
Display in the instrument cluster  
When the drive-ready state  
is switched on, READY is dis-  
played in the instrument cluster.  
Combustion engine start  
The combustion engine is started under the  
following conditions when the drive-ready  
state is switched on:  
The temperature of the hybrid system is  
too high or too low.  
The high-voltage battery has insufficient  
charge.  
The vehicle was parked in SPORT driving  
mode shortly beforehand.  
Turning off drive-ready state  
1. While the vehicle is stationary, engage se-  
lector lever position P and apply the parking  
brake.  
2. Press the Start/Stop button.  
After parking the vehicle, the hybrid system  
may generate audible operating noises, e.g.,  
when cooling the high-voltage battery.  
47