Get QUICK REFERENCE -> On the road Guide for BMW XM SUV First Generation (2023-2025)

On the road

QUICK REFERENCE

On the road

M Steptronic Sport transmission

Driving

Engaging selector lever position D/S,

N, R

Drive-ready state

Turning on the drive-ready state

1. Close the driver's door.

2. Depress the brake pedal.

3. Press the Start/Stop button.

Drive-ready state is turned on and one of the

following prerequisites is met:

▷

The combustion engine starts.

Drive-ready state for the electric drive is on

but the combustion engine has not been

started.

▷

R reverse gear.

N neutral.

Center position, forward position.

Turning off drive-ready state

1. While the vehicle is stationary, depress the

brake and engage selector lever position P.

- Downshifting, manual.

+ Upshifting, manual.

D/S Drive mode or sequential mode.

2. Set the parking brake.

To prevent the vehicle from creeping after you

select a gear position or reverse gear, main-

tain pressure on the brake pedal until you are

ready to drive off.

3. Press the Start/Stop button.

The READY indicator goes out and a signal

tone sounds.

The drive-ready state is switched off automat-

ically if the driver's seat belt is not buckled

when the driver's door is opened.

Engage selector lever position R only when the

vehicle is stationary.

Engaging selector lever position P

Engage selector lever position P only when the

vehicle is stationary.

Auto Start/Stop function

The Auto Start/Stop function helps to conserve

fuel. The system shuts off the combustion en-

gine when the requirements for electric drive

are met. Drive-ready state remains switched

on. READY is displayed in the instrument clus-

ter. If necessary, the combustion engine starts

automatically.

26

On the road

QUICK REFERENCE

Light and view

Turn signal, high-beam headlights,

headlight flasher

Turn signal

Press button P.

Parking brake

Setting the parking brake

Pull the switch.

The LED on the switch and the indica-

tor light in the instrument cluster are

illuminated.

▷

Flashing: press the lever past the resist-

ance point.

One-touch signaling: lightly tap the lever up

or down.

Releasing the parking brake

Brief flashing: press the lever to the resist-

ance point and hold it there for as long as

you want the turn signal to flashing.

With drive-ready state switched on:

Press the switch while stepping on the

brake pedal or selector lever position P

is set.

High-beam headlights,

headlight flasher

The LED and the indicator light go out.

The parking brake is released.

Parking

Make sure the parking brake is engaged.

Press the lever forward or pull it backward.

▷

High-beam headlights on, arrow 1.

The high-beam headlights illuminate when

the low-beam headlights are switched on.

▷

High-beam headlights off/headlight flasher,

arrow 2.

27

On the road

QUICK REFERENCE

Lights and lighting

Window wiper system

Buttons in the vehicle

Turning on window wiper system

Icon

Function

Exterior lighting menu.

Automatic headlight control.

Low-beam headlights.

Exterior lighting off.

Press the lever up until the desired position is

reached.

▷

Rest position of the wipers, position 0.

Rain sensor mode, position 1.

Normal wiper speed, position 2.

Fast wiper speed, position 3.

Functions via iDrive

Icon

Function

Automatic headlight control.

Turning off the window wiper system

and flick wipe

Low-beam headlights.

Parking lights.

Exterior lighting off.

Left roadside parking light.

Right roadside parking light.

Press the lever down.

▷

Turning off: press the lever down until it

reaches the 0 position.

▷

Flick wipe: press the lever down from the 0

position.

The lever automatically returns to its 0 po-

sition when released.

28

On the road

QUICK REFERENCE

Activating/deactivating rain sensor

Rear wiper

Switching on the rear wiper

Enable: press lever up once from the 0 posi-

tion, arrow 1.

Turn the outer switch upward.

Disable: press lever back into the 0 position.

▷

Resting position of wiper, position 0.

Intermittent operation, arrow 1. When re-

verse gear is engaged, the system switches

to continuous operation.

Adjusting the rain sensor sensitivity

Clean the rear window

Turn the outer switch in the desired direction.

▷

In rest position: Turn the switch downward,

arrow 3. The switch returns to its rest posi-

tion when released.

▷

In intermittent operation: turn the switch

further, arrow 2. The switch automatically

returns to its interval position when re-

leased.

Turn the knurled wheel on the wiper lever.

Cleaning the windshield

Climate control

Climate control functions

Functions in the Climate menu

Icon

Function

Turn the climate control sys-

tem on/off.

Pull the lever.

Automatic program.

29

On the road

QUICK REFERENCE

Buttons, automatic climate control

Icon

Function

Temperature.

Air conditioning.

Maximum cooling.

Air recirculation mode.

Icon

Function

Defrost function.

Automatic recirculated-air con-

trol.

Rear window defroster.

Fresh air.

Buttons, rear automatic climate control

Air flow.

Icon

Function

Air distribution.

Automatic program.

SYNC program.

Temperature.

Seat and armrest heating.

Active seat ventilation.

Steering wheel heating.

Air conditioning.

Maximum cooling.

Air flow.

Air distribution.

Seat and armrest heating.

30

On the road

QUICK REFERENCE

Fuel filler cap

1. To open the fuel filler flap, press on the rear

edge, arrow. The fuel filler flap opens.

Intermediate stop

Refueling

Ventilate the tank

Overpressure caused by gasoline vapors may

form in the fuel tank. Before opening, ventilate

the tank to equalize the pressure.

The button is located in the storage compart-

ment of the driver's door.

2. Open the fuel filler cap counterclockwise.

1. Press the tank ventilation

button in

the driver’s door to start pressure equaliza-

tion.

The tank ventilation system status is dis-

played in the instrument cluster. In rare

cases, tank ventilation can last several mi-

nutes.

When tank ventilating has finished, a mes-

sage is displayed in the instrument cluster.

The fuel filler flap is released for opening.

3. Place the fuel filler cap in the bracket on the

fuel filler flap.

2. Open the fuel filler flap.

If it is not possible to open the fuel filler

flap after tank ventilating, press the button

again.

If it is still not possible to open the fuel filler

flap even after pressing the button again,

unlock the fuel filler flap manually.

Charging the vehicle

Depending on national-market version, use a

mode 2 charging cable, fast charging cable

(mode 3), or the permanently installed cable

of a charging station to charge the vehicle.

The charging cable can be stowed in the cargo

area, in a bag for instance.

Before disconnecting and connecting a charg-

ing cable, clean the area between the charg-

31

On the road

QUICK REFERENCE

ing socket flap and charging socket and the

charging cable plug as necessary, for instance

remove snow.

Displaying the engine oil level

1.

Apps menu

2. "Vehicle"

If necessary, unlock the charging cable before

removing.

3. "Vehicle status"

4. "Engine oil level"

The engine oil level is displayed.

The charging status is indicated on the indica-

tor light on the charging socket.

Keep the charging socket flap and, if neces-

sary, the charging socket lid closed when the

charging socket is not used.

Adding engine oil

General information

Wheels and tires

Safely park the vehicle and switch off drive-

ready state before adding engine oil.

Tire pressure specifications

The tire inflation pressure specifications can be

found in the tire inflation pressure table in the

printed Owner's Manual.

Adding engine oil

1. Opening the hood.

2. Open the lid counterclockwise.

After correcting the tire pressure

If equipped with a Tire Pressure Monitor, the

corrected tire pressures are applied automati-

cally. Make sure that the correct tire settings

have been made. With tires that cannot be

found in the tire pressure values on the control

display, reset the Tire Pressure Monitor (TPM).

If equipped with a flat tire monitor, reinitialize

the flat tire monitor.

3. Add engine oil.

4. Close the lid.

Checking the tire pressure

Regularly check the tire inflation pressure and

correct it as needed:

Providing assistance

▷

At least twice a month.

Before embarking on an extended trip.

Hazard warning system

Electronic oil measurement

Functional requirements

A current measured value is available after ap-

prox. 30 minutes of normal driving with the

combustion engine running.

32

On the road

QUICK REFERENCE

Hazard warning system button

ConnectedDrive

BMW Assistance

Contact BMW Assistance for information and

support for all aspects of the vehicle.

1.

Apps menu

2. "All apps"

3. "BMW Assist"

4. If necessary, select the desired service.

A voice connection to the selected service is

established.

BMW Teleservices

Teleservices are services that help to maintain

vehicle mobility.

Teleservices can comprise the following serv-

ices:

▷

BMW Roadside Assistance.

BMW Accident Assistance.

Teleservice Call.

An authorized service center.

33

QUICK REFERENCE -> On the road for Your BMW XM SUV First Generation (2023-2025)

Related Topics

QUICK REFERENCE

Popular Owner Manuals

Latest Owner Manuals