Get QUICK REFERENCE -> Set-up and use Guide for BMW Z4 2 Door First Generation (2002-2008)

Set-up and use

QUICK REFERENCE

Set-up and use

Adjusting the steering wheel

Manual steering wheel adjustment

Seats, mirrors, and steering

wheel

Electrically adjustable seats

1. Fold the lever down.

2. Move the steering wheel to the preferred

height and angle to suit your seating position.

Forward/backward, height, seat tilt

Backrest tilt

3. Fold the lever back up.

Memory function

Concept

Backrest width

Lumbar support

Adjusting the exterior mirrors

The following settings can be stored and, if nec‐

essary, retrieved using the memory function:

▷ Seat position.

▷ Exterior mirror position.

▷ Height of the Head-up Display.

Storing

1. Set the desired position.

Press button on the door. The writ‐

ing on the button lights up.

Adjusting

Selecting a mirror, Automatic Curb Monitor

Folding in and out

3. Press the desired button 1 or 2 at the door

while the writing is lit. A signal sounds.

Calling up settings

Press the desired button 1 or 2.

Set-up and use

QUICK REFERENCE

Connecting a mobile phone

General information

After the mobile phone is connected once to the

vehicle, the mobile phone can be operated using

iDrive, the steering wheel buttons, voice activa‐

tion, and gestures.

Infotainment

Radio

Connecting the mobile phone via

Bluetooth

Via iDrive:

1. "COM"

Changing the entertainment source

Sound output on/off, volume

Programmable memory buttons

Changing the station/track

2. If necessary, select the following setting:

"Telephone"

3. "Connect new phone"

4. To perform additional steps on the mobile

phone, refer to the mobile phone owner's

manual: e.g., search for or connect the Blue‐

tooth device or a new device.

Waveband/satellite radio

Navigation destination entry

The Bluetooth name of the vehicle appears

on the mobile phone display. Select the Blue‐

tooth name of the vehicle.

Entering a destination via quick

5. Depending on the mobile device, a control

number is displayed or the control number

must be entered.

Press the button on the Controller.

"Where to?"

▷ Compare the control number displayed

on the Control Display with the control

number on the display of the device.

3. Enter at least two letters or characters.

The search term may be completed automat‐

ically in gray print.

Confirm the control number on the device

and on the Control Display.

Press or move the controller up to apply the

suggested search term.

▷ Enter and confirm the same control num‐

ber on the device and via iDrive.

Select the symbol, if needed.

Results are displayed in a list.

The device is connected and displayed in the

device list.

5. "Search location": select search location.

6. Move the Controller to the right.

7. Select desired destination.

Using the phone

Accepting a call

Depending on the equipment, incoming calls can

be answered in several ways.

▷ Via iDrive:

Set-up and use

QUICK REFERENCE

"Accept"

Switching on Bluetooth and CarPlay

▷

Press the button on the steering

wheel.

Via iDrive:

1. "COM"

▷ Via the selection list in the instrument cluster:

2. "Mobile devices"

3. Move the Controller to the right.

4. "Settings"

Use the thumbwheel on the steering wheel to

select: "Accept"

▷ Via touch screen: tap on the corresponding

entry on the Control Display.

5. Select the following setting:

"Apple CarPlay"

▷ Via gestures: point the index finger into the

direction of the Control Display.

6. Activate the function.

Dialing a number

Via iDrive:

Pairing the iPhone with CarPlay

Pair iPhone via Bluetooth with the vehicle.

Select CarPlay as the function:

"Apple CarPlay"

1. "COM"

2. If necessary, "Telephone"

3. "Dial number"

The iPhone is connected to the vehicle and dis‐

played in the device list.

4. Enter the numbers.

Select the symbol. The connection is es‐

tablished via the mobile phone to which this

function has been assigned.

If connection is to be set up via the additional

phone:

Press the button.

2. "Call via"

Apple CarPlay preparation

Concept

CarPlay allows certain functions of a compatible

Apple iPhone to be used via Siri voice operation

and iDrive.

Functional requirements

▷ Compatible iPhone.

iPhone 5 or later with iOS 7.1 or later.

▷ Corresponding mobile contract.

▷ Bluetooth, WiFi, and Siri voice operation are

activated on the iPhone.

QUICK REFERENCE -> Set-up and use for Your BMW Z4 2 Door First Generation (2002-2008)

Related Topics

QUICK REFERENCE

Popular Owner Manuals

Latest Owner Manuals