QUICK REFERENCE -> Set-up and use for Your BMW Z4 2 Door Third Generation (2018-2026)

Set-up and use  
QUICK REFERENCE  
Set-up and use  
Adjusting the steering wheel  
Seats, mirrors and steering  
wheel  
Manual steering wheel adjustment  
Electrically adjustable seats  
1. Fold the lever down.  
2. Move the steering wheel to the preferred  
height and angle to suit your seat position.  
1
Forward/backward, height, seat tilt  
Backrest tilt  
2
3
4
3. Fold the lever back up.  
Memory function  
Principle  
The following settings can be stored and, if  
necessary, retrieved using the memory func-  
tion:  
Backrest width  
Lumbar support  
Adjusting the exterior mirrors  
Seat position.  
Exterior mirror position.  
Height of the Head-up display.  
Storing  
1. Set the desired position.  
1
Adjusting  
2.  
Press the button. The LED in the  
button illuminates.  
2
3
Selecting a mirror, Automatic Curb Monitor  
Folding in and out  
3. Press the desired button 1 or 2 at the  
door while the LED is illuminated. A signal  
sounds.  
Calling up settings  
Press the desired button 1 or 2.  
20  
 
Set-up and use  
QUICK REFERENCE  
The search term may be completed auto-  
matically in orange lettering.  
Infotainment  
Tilt the Controller up to accept the sug-  
gested search term.  
Radio  
4.  
Select the icon, if needed.  
Buttons and functions  
Depending on the country and equipment ver-  
sion, the radio has the following buttons.  
A list of the results is displayed.  
5. If necessary, "Filter"  
6. "Show results"  
Button  
Function  
7. Select the desired entry.  
8. If necessary, "Start guidance"  
Press: turns sound output on/  
off.  
Turn: adjusts the volume.  
Using the mobile phone  
General information  
After the mobile phone is connected once to  
the vehicle, the mobile phone can be operated  
using iDrive and the steering wheel buttons.  
Change the entertainment  
source.  
Press once: changes the sta-  
tion/track.  
Connecting via Bluetooth®  
1. "COM"  
/
/
Press and hold: fast for-  
ward/rewind the track.  
2. "Mobile devices"  
3. Tilt the Controller to the right.  
4. "New device"  
Programmable memory but-  
tons.  
5. "Phone calls and audio"  
The vehicle's Bluetooth name is displayed  
on the control display.  
6. Compare the control number displayed on  
the control display with the control number  
on the display of the mobile device, and  
confirm that the two match.  
Changeover of wave range/  
satellite radio.  
Menu Apps.  
7. A Bluetooth connection is established.  
The mobile device is connected to the vehicle  
and displayed in the device list.  
Navigation destination input  
Entering a destination via the search  
Accepting a call  
Depending on the equipment, incoming calls  
can be answered in several ways.  
1.  
Press the button on the Controller.  
"Where to?"  
2.  
Via iDrive:  
3. Enter at least two letters or characters.  
Select point of interest categories from the  
points of interest menu as needed.  
21  
 
Set-up and use  
QUICK REFERENCE  
"Accept"  
/
If necessary, the setting for mobile data  
must be activated on the iPhone.  
Wi-Fi and Bluetooth are enabled in the ve-  
hicle.  
Press the corresponding button on the  
steering wheel.  
Pairing the iPhone with CarPlay  
1. "COM"  
Use the knurled wheel on the steering  
wheel to select from the list in the instru-  
ment cluster: "Accept"  
2. "Mobile devices"  
Via touchscreen: tap on the corresponding  
entry on the control display.  
3. "New device"  
4. "Phone calls and audio"  
The vehicle's Bluetooth name is displayed  
on the control display.  
Dialing a number  
1. "COM"  
5. On the mobile device, search for nearby  
Bluetooth devices and select the vehicle.  
2. If necessary, "Telephone"  
3. "Dial number:"  
A control number is displayed.  
4. Enter the numbers.  
6. Compare the control number displayed on  
the control display with the control number  
on the display of the mobile device, and  
confirm that the two match.  
5.  
Select the icon. The connection is es-  
tablished via the mobile phone to which this  
function has been assigned.  
Establish the connection via the additional te-  
lephone:  
7. "Use Apple CarPlay"  
The iPhone is connected to the vehicle and  
displayed in the device list.  
1.  
Press the button.  
2. "Call via"  
Apple CarPlay© preparation  
Principle  
CarPlay allows operation of select functions of  
a compatible Apple iPhone via Siri voice con-  
trol and iDrive.  
Functional requirements  
Compatible iPhone: iPhone 5 or later with  
iOS 9.3 or later.  
Corresponding mobile contract.  
Bluetooth®, Wi-Fi, and Siri voice control  
are turned on the iPhone.  
22