REFERENCE -> Technical data for Your BMW Z4 2 Door Third Generation (2018-2026)

Technical data  
REFERENCE  
Technical data  
vehicle, e.g., due to the selected options or  
country versions. This also applies to safety  
functions and systems. When using these  
functions and systems, the applicable laws  
and regulations must be observed.  
Vehicle features and options  
This chapter describes all standard, country-  
specific, and optional equipment offered with  
the series. It also describes features and func-  
tions that are not necessarily available in the  
General information  
The technical data and specifications in the  
Owner's Manual are used as guidance values.  
Vehicle-specific data may deviate from this,  
for instance due to the optional equipment  
chosen, national-market version, or country-  
specific measuring process. More specific val-  
ues can be obtained in approval documents,  
on the vehicle info label, or from an authorized  
service center or another qualified service cen-  
ter or repair shop.  
Dimensions  
The dimensions can vary depending on the  
model version, equipment version or country-  
specific measurement procedure.  
The height of the vehicle can also differ, e.g.,  
due to tires and vehicle load.  
BMW Z4 Roadster  
Width with mirrors  
Width without mirrors  
Height  
in/mm  
in/mm  
in/mm  
in/mm  
in/mm  
ft/m  
79.7/2,024  
73.4/1,864  
51.4/1,306  
170.7/4,337  
97.2/2,470  
36.1/11.0  
Length  
Wheelbase  
Turning radius diameter  
328  
 
Technical data  
REFERENCE  
Weights  
Z4 sDrive 30i  
Permissible gross mass  
Payload  
lbs/kg  
lbs/kg  
lbs/kg  
lbs/kg  
3,880/1,760  
459/208  
1,852/840  
2,105/955  
Approved front axle weight  
Approved rear axle weight  
Z4 M40i powered by BMW M  
Permissible gross mass  
Payload  
lbs/kg  
lbs/kg  
lbs/kg  
lbs/kg  
4,101/1,860  
538/244  
Approved front axle weight  
Approved rear axle weight  
1,940/880  
2,216/1,005  
Filling capacities  
BMW Z4 Roadster  
Fuel tank, approx.  
US gal/liters  
13.7/52.0  
Observe further information on fuel quality, re-  
fer to page 300.  
329