Practical information
Head restraints and seat belts
Placing the bench seat in the
fully folded position
The three seats are equipped with
Bench seat
inertia reel seat belts. The seat belts of
the side seats are solid with the panels,
whereas the seat belt of the centre seat
is solid with the back of the bench seat.
Each seat has a head restraint bolted
onto the load retaining grille and which
can be removed.
Do not store a head restraint inside
the vehicle unless it is stowed or fixed
to a support.
-
If necessary, move the front seats
forward and fasten the strap of the
seat belt of the centre seat.
Check that the seat belt straps and
buckles are positioned correctly
along the side panels, to ensure
that the sliding of the seat back
is not hindered.
The crew cab consists of a 3-seat
bench, located in row 2, the one-piece
back of which is solid with the "load
retainer" grille.
Access to the rear seats is via the sliding
side door.
-
-
Release the seat back using
the control A.
Do not drive with rear passengers
without first bolting the head restraints
in place.
English 